First metal separated by electrolysis?

First metal separated by electrolysis?
by

1 Answer

Answer :

Potassium
by

Related questions

The metal which cannot be obtained by electrolysis of aqueous solution of its salts is

Description : The metal which cannot be obtained by electrolysis of aqueous solution of its salts is

Last Answer : The metal which cannot be obtained by electrolysis of aqueous solution of its salts is A. Ag B. Mg C. Cu D. Al

The metal A is prepared by the electrolysis of fused chloride. It reacts with hydrogen to form a colourless solid from which hydrogen is released on t

Description : The metal A is prepared by the electrolysis of fused chloride. It reacts with hydrogen to form a colourless solid from which hydrogen is released on t

Last Answer : The metal A is prepared by the electrolysis of fused chloride. It reacts with hydrogen to form a colourless solid from ... is A. Al B. Ca C. Cu D. Zn

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

A thick film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact (C) Where the surfaces of journal and the bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Description : A thick film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially ... are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Last Answer : (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant

A thin film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact (C) Where the surfaces of journal and the bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Description : A thin film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially ... are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Last Answer : (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact

A zero film bearing is a bearing (A) Where the surfaces of journal and the bearing are separated by a thick film of lubricant (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact (C) Where the surfaces of journal and the bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Description : A zero film bearing is a bearing (A) Where the surfaces of journal and the bearing are separated by a thick film of lubricant (B) Where the surfaces of journal and the bearing are partially ... bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Last Answer : (D) Where there is no lubricant

1. Which is the gas usually filled in the electric bulb? 2. What is an intrusion of magma along a bedding plane is called? 3. Of which metal was the The famous figure of a dancing girl found in the excavations of Harappa ? 4. Which is nearest to Indira Gandhi Centre for Atomic Research? 5. Which part of separated UTI is under SEBI’s regulation?

Description : 1. Which is the gas usually filled in the electric bulb? 2. What is an intrusion of magma along a bedding plane is called? 3. Of which metal was the The famous figure of a dancing girl ... alloys is used for making magnets? 20. By which bank are the central banking functions in India performed?

Last Answer : Answer : 1. Nitrogen 2. Batholith 3. Bronze 4. Mahabalipuram 5. UTI-II 6. Xylem vessel system 7. China 8. Introduction of Dyarchy 9. Home Affairs 10. Charles H. Townes 11. Russia 12. Oxygen ... . Euclyptus 16. The Estimates Committee 17. Yangtze delta 18. Udayin 19. Alnico 20. Reserve Bank of India

State Faraday’s first law of electrolysis.

Description : State Faraday’s first law of electrolysis.

Last Answer : “The mass of substance deposited or collected at either electrode during electrolysis is proportional to the current and to the time”.

What is Faraday's first law of electrolysis ?

Description : What is Faraday's first law of electrolysis ?

Last Answer : First formula: In the process of electrolysis, the amount of material deposited on the electrode is proportional to the amount of electricity flowing through the solution or electrolyte.

How could we prevent H+ ions to be discharged first than Na+ during electrolysis of aqueous solution of NaCl?

Description : How could we prevent H+ ions to be discharged first than Na+ during electrolysis of aqueous solution of NaCl?

Last Answer : Ans: This could be prevented by using mercury cathode during this kind of electrolysis, because H+ ions need high voltage to be discharged at mercury cathode. In this way sodium got discharged at cathode despite H+ ions.

During electrolysis of aqeous solution of NaCl, there are two type of anions are present Cl- and –OH, Cl- is discharged first than –OH,although it is present below Cl- in electrochemical series. Give reason.

Description : During electrolysis of aqeous solution of NaCl, there are two type of anions are present Cl- and –OH, Cl- is discharged first than –OH,although it is present below Cl- in electrochemical series. Give reason.

Last Answer : Ans: During this electrolysis process Chloride ions come from NaCl, which is a strong electrolyte and ionize to large extent so concentration of chloride ions in solution will be high. ... chloride ions it is first discharged despite of its presence above than hydroxyl in electrochemical series.

State Faraday’s first law of electrolysis.

Description : State Faraday’s first law of electrolysis. 

Last Answer : Faraday’s first law of electrolysis:- It states that the weight (W) of the substance deposited or liberated at the electrode during electrolysis is directly proportional to the quantity of electricity (Q) that is passed through electrolyte solution.

The process of electroplating involves (a) electrolysis (b) dialysis (c) osmosis (d) decomposition

Description : The process of electroplating involves (a) electrolysis (b) dialysis (c) osmosis (d) decomposition

Last Answer : Ans:(a)

Ions moving towards the cathode during electrolysis of an aqueous solution of Ca(OH)2 are (a) OH (b) H+ (c) Ca2+ (d) 02

Description : Ions moving towards the cathode during electrolysis of an aqueous solution of Ca(OH)2 are (a) OH (b) H+ (c) Ca2+ (d) 02

Last Answer : Ans:(a)

An aqueous solution of CuSO4 is acidic in nature because the salt undergoes (a) dialysis (b) hydrolysis (c) electrolysis (d) photolysis

Description : An aqueous solution of CuSO4 is acidic in nature because the salt undergoes (a) dialysis (b) hydrolysis (c) electrolysis (d) photolysis

Last Answer : Ans:(b)

During electrolysis, the cations and anions of the electrolyte are 1. Discharged 2. Hydrolysed 3. In motion 4. Hydrated The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Description : During electrolysis, the cations and anions of the electrolyte are 1. Discharged 2. Hydrolysed 3. In motion 4. Hydrated The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(a)

Aluminium is extracted from bauxite (a) By reduction with carbon (b) By reduction with Mg (c) By reduction with CO (d) By electrolysis in molten cryolite

Description : Aluminium is extracted from bauxite (a) By reduction with carbon (b) By reduction with Mg (c) By reduction with CO (d) By electrolysis in molten cryolite

Last Answer : Ans:(d)

Mention the applications of electrolysis.

Description : Mention the applications of electrolysis.

Last Answer : a) Electroplating b) Electrotyping c) Purification of metals d) Decomposition of salts e) Electro polishing f) Manufacture of certain chemicals like caustic soda.

State Faraday’s second law of electrolysis.

Description : State Faraday’s second law of electrolysis.

Last Answer : “The masses of different substances liberated by the same quantity of electricity are proportional to their chemical equivalents”.

On what factors does the amount of deposition in electrolysis depend?

Description : On what factors does the amount of deposition in electrolysis depend?

Last Answer : The amount of deposition depends on the a) Current b) Time c) Nature of substance

Give reason: A.C cannot be used for electrolysis.

Description : Give reason: A.C cannot be used for electrolysis.

Last Answer : In electrolysis the ionisation of the electrolyte takes place where the positive and negative charges move towards opposite electrodes. But if we pass an alternating current the polarity ... electrode resulting in no ionisation. Hence electrolysis cannot take place with alternating current.

By which process copper is refined ------? A. Roasting (Answer) B. Oxidation C. Zone Refining D. Electrolysis

Description : By which process copper is refined ------? A. Roasting (Answer) B. Oxidation C. Zone Refining D. Electrolysis

Last Answer : A. Roasting (Answer)

Why is the amount of gas collected in one of the test tubes in text book Activity 1.7 (i.e., electrolysis of water) double of the amount collected in the other? Name this gas. -Chemistry-10

Description : Why is the amount of gas collected in one of the test tubes in text book Activity 1.7 (i.e., electrolysis of water) double of the amount collected in the other? Name this gas. -Chemistry-10

Last Answer : In Activity 1.7, water is electrolysed to give H2 gas at one electrode and O2 gas at the other electrode. 2H2O(l) → 2H2(g) + O2(g) Thus two molecules of water on electrolysis give two ... oxygen gas or in other words the amount of hydrogen gas collected would be double than that of oxygen gas.

.Identify the physical and chemical changes from the following (i)Burning of magnesium in air (ii)Electrolysis of water (iii)Tarnishing of silver spoon (iv)Sublimation of iodine -Chemistry

Description : .Identify the physical and chemical changes from the following (i)Burning of magnesium in air (ii)Electrolysis of water (iii)Tarnishing of silver spoon (iv)Sublimation of iodine -Chemistry

Last Answer : (i) Burning of magnesium in air : Chemical change (ii) Tarnishing of silver spoon : Chemical change (iii) Sublimation of iodine : Physical change (iv) Electrolysis of water to form hydrogen and oxygen is also a chemical change.

During electrolysis, which the species are discharged at cathode? -Do You Know?

Description : During electrolysis, which the species are discharged at cathode? -Do You Know?

Last Answer : answer:

What is Electrolysis ?

Description : What is Electrolysis ?

Last Answer : When an acid of a metal conducts electricity in a salt or alkali solution or acid mixed water , the molecules of the solution split and accumulate at the anode and cathode. Electrolysis is the ... splits into copper and sulphate and copper is deposited at the cathode and sulphate at the anode.

Which of the following is essential for electrolysis ?

Description : Which of the following is essential for electrolysis ?

Last Answer : Electrolysis cells are needed for electrolysis.

What is found in electrolysis ?

Description : What is found in electrolysis ?

Last Answer : Electrolysis The conductivity and electrolysis occur according to the nature and attachment of the conductor. When electrolysis of different electrolytic substances is done in molten state and solution, different products are ... . And in the middle of this density, both metal and H 2 are found.

Why is electrolysis an oxidation reaction ?

Description : Why is electrolysis an oxidation reaction ?

Last Answer : If electrons are exchanged in a reaction, it is called oxidation reaction. In the process of electrolysis, positive ions take electrons from the cathode (oxidation) and negative ions leave electrons (oxidation) at the anode. Therefore , electrolysis is an oxidation process.

What is Electrolysis ?

Description : What is Electrolysis ?

Last Answer : : In chemistry, when an electric current is run through a substance dissolved in a solution of an electrolytic substance, a chemical dissociation of that electrolytic substance occurs and a new chemical characteristic substance is produced .

What is Electrolysis ? What is an electrical analyst ?

Description : What is Electrolysis ? What is an electrical analyst ?

Last Answer : Substances which, when dissolved in water or dissolved in ions, transmit electricity and, as a result of which the electrolysis itself is chemically dissolved and new substances are produced , are called electro-analysts.

What is Electrolysis ?

Description : What is Electrolysis ?

Last Answer : Electrolysis is the method by which electrolysis is carried out in an electrolytic substance by dissolving or dissolving a suitable solvent in a molten state.

Who invented electrolysis ?

Last Answer : Discover electrolysis (Faraday)

The electrolysis of the disodium salt of pentanedioc acid gives

Description : The electrolysis of the disodium salt of pentanedioc acid gives

Last Answer : The electrolysis of the disodium salt of pentanedioc acid gives A. pentane B. butane C. Cyclopropane D. ethane

A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Description : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Last Answer : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` ... x & y are the molar mass of P and Q.

Electrolysis of aqueous solution of Brine (NaCI) gives

Description : Electrolysis of aqueous solution of Brine (NaCI) gives

Last Answer : Electrolysis of aqueous solution of Brine (NaCI) gives A. (A)`Cl_2` B. (B) `H_2` C. (C) NaHO D. (D) all of these

During the electrolysis of carnallite , `MgCl_(2)` is decomposed and not KCl . This is because of :

Description : During the electrolysis of carnallite , `MgCl_(2)` is decomposed and not KCl . This is because of :

Last Answer : During the electrolysis of carnallite , `MgCl_(2)` is decomposed and not KCl . This is because of : A. lower ... both (A) and (B) D. none of the above

Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get discharged and this value is e

Description : Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get discharged and this value is e

Last Answer : Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get ... 3)` D. `H_(2)S_(2)O_(8)`

Statement-1: Sodium chloride is added during electrolysis of fused anhdrous magnesium chloride. Statement-2: Anhydous magnesium chloride is obtained b

Description : Statement-1: Sodium chloride is added during electrolysis of fused anhdrous magnesium chloride. Statement-2: Anhydous magnesium chloride is obtained b

Last Answer : Statement-1: Sodium chloride is added during electrolysis of fused anhdrous magnesium chloride. Statement-2: ... -1 is false but Statement -2 is true

Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get discharged and this value is e

Description : Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get discharged and this value is e

Last Answer : Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get ... ,H_(2)` D. `O_(2),H_(2)`

Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get discharged and this value is e

Description : Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get discharged and this value is e

Last Answer : Electrolysis is an impotant technique for extraction of metals, and each of the solution needs a minimum voltage to get ... ` C. `Br_(2)` D. `O_(2)`

`NaC1` and `CaC1_(2)`are added to fused `MgC1_(2)`in the electrolysis of `Mgc1_(2)`since:

Description : `NaC1` and `CaC1_(2)`are added to fused `MgC1_(2)`in the electrolysis of `Mgc1_(2)`since:

Last Answer : `NaC1` and `CaC1_(2)`are added to fused `MgC1_(2)`in the electrolysis of `Mgc1_(2 ... decreased D. meolting point and conductivity both are increased.

Aluminium is extracted in the electrolysis of :

Description : Aluminium is extracted in the electrolysis of :

Last Answer : Aluminium is extracted in the electrolysis of : A. Alumina B. Bauxite C. Molten cryolite D. Alumina mixed with molten cryolite

When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Description : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Last Answer : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes ... "),("Pure Zinc","ImPure Zinc"):}`

Which of the following prtoducts is not formed at the anode in the hall -Heroult electrolysis process?

Description : Which of the following prtoducts is not formed at the anode in the hall -Heroult electrolysis process?

Last Answer : Which of the following prtoducts is not formed at the anode in the hall -Heroult electrolysis process? A. `CO_(2)` B. `O_(2)` C. `Cl_(2)` D. `F_(2)`

When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Description : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Last Answer : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are ... 4)","Impure zinc","Impure sample"):}`

In the extraction of chlorine by electrolysis of brine_________.

Description : In the extraction of chlorine by electrolysis of brine_________.

Last Answer : In the extraction of chlorine by electrolysis of brine_________. A. oxidation of `Cl^(-)` ... negative value D. a displacement reaction takes value

Electrochemical process (electrolysis of fused salt) is empolyed to extract

Description : Electrochemical process (electrolysis of fused salt) is empolyed to extract

Last Answer : Electrochemical process (electrolysis of fused salt) is empolyed to extract A. Iron B. Mg C. Na D. Both Na and Mg

Aluminium is obtained by the electrolysis of pure of `Al_(2)O_(3)` dissolved in

Description : Aluminium is obtained by the electrolysis of pure of `Al_(2)O_(3)` dissolved in

Last Answer : Aluminium is obtained by the electrolysis of pure of `Al_(2)O_(3)` dissolved in A. Alumina B. Bauxite C. Cryolite D. Felspar

Oxygen and hydrogen gases are produced at the anode and cathod erespectively during electrolysis of dilute aq. Solution of

Description : Oxygen and hydrogen gases are produced at the anode and cathod erespectively during electrolysis of dilute aq. Solution of

Last Answer : Oxygen and hydrogen gases are produced at the anode and cathod erespectively during electrolysis of dilute aq. Solution ... (3)` C. HCl D. `CuSO_(4)`