Description : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :
Last Answer : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are ... 4)","Impure zinc","Impure sample"):}`
Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.
Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode
Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at cathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.
Last Answer : Copper at cathode and oxygen at anode.
Description : The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution
Last Answer : (D) Increasing the concentration of copper sulphate solution
Description : Silver containing lead as an impurity is not purified by
Last Answer : Silver containing lead as an impurity is not purified by A. Poling B. Distillation C. cupellation D. Levigation
Description : Aluminium can be purified by (1) oxidation (2) distillation (3) electrolysis (4) ozonolysis
Last Answer : electrolysis
Description : When a sample of germanium and silicon having same impurity density are kept at room temperature then Resistivity of silicon will be higher than that of germanium, Why?
Last Answer : Ans-The answer is simple. Consider the PN diode for Ge 0.3eV is the breakdown voltage and in the case of Si its 0.7eV since the impurities are added in the same amount the bond due to the other atoms of the Si makes it resistive compared to the Ge.. thats all!
Description : Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon
Last Answer : (2) Nickel and cadmium Explanation: A rechargeable battery, storage battery, or accumulator is a type of electrical battery. It comprises one or more electrochemical cells, and is a ... sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network.
Description : Which of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc. ? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon
Last Answer : Nickel and cadmium
Description : Mass spectrometry- how to identify if the mass spectrograph of a purified sample is a certain chemical given main mass components?
Last Answer : I really should know how to do that. I’m glad my AP Chem teacher doesn’t Fluther.
Description : A number of changes in trace mineral metabolism are noted during sepsis. Which of the following change(s) may be observed in a septic or trauma patient? a. Plasma iron levels are noted to ... are noted to decrease c. Plasma serum zinc levels may decrease d. Administration of iron is appropriate
Last Answer : Answer: a, c Changes in the balance of magnesium, inorganic phosphate, zinc, and potassium generally follow alterations in nitrogen balance. Although the iron-binding capacity of transferrin ... concentrations can be ascribed almost entirely to the levels of the ceruloplasmin produced by the liver
Description : What is the voltage of an electrolytic cell copper and magnesium electrodes?
Last Answer : -2.71 V
Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron
Last Answer : (B) Manganese
Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded
Last Answer : (D) Mild steel sheet cannot be spot welded
Description : When copper pyrites is roasted in excess of air, a mixture of `CuO + FeO` is formed. `FeO` is present as impurity. This can be removed as slag during
Last Answer : When copper pyrites is roasted in excess of air, a mixture of `CuO + FeO` is formed. `FeO` is present ... a basic flux D. CaO, which is a basic flux
Description : The impurity present in Blister copper is
Last Answer : The impurity present in Blister copper is A. FeS B. `Cu_(2)O` C. `Cu_(2)S` D. FeO
Description : A small quantity of impurity reduces how much of conductivity of copper?
Last Answer : 35% of conductivity will be reduced due a small impurity in the conductor.
Description : Which of the following can be purified by the electrolytic method? (a) Sodium (Na) (b) Copper (Cu) (c) Boron (B) (d) Chlorine (C12)
Last Answer : Ans:129
Description : Copper is refined by - (1) roasting (2) oxidation (3) electrolysis (4) zone refining
Last Answer : (1) roasting Explanation: Copper is refined by the method of roasting. In the roaster, the copper concentrate is partially oxidised to produce "calcine" and sulfur dioxide gas. In roasting, the ... ore concentrate is treated with very hot air. This process is generally applied to sulphide minerals.
Description : By which process copper is refined ------? A. Roasting (Answer) B. Oxidation C. Zone Refining D. Electrolysis
Last Answer : A. Roasting (Answer)
Description : Which of the following metals can be obtained from its ore only by electrolysis of a molten salt ? w) cobalt x) chromium y) copper z) sodium
Last Answer : ANSWER: Z -- SODIUM
Description : Copper is refined commercially by a process of: w) smelting x) electrolysis y) sublimation z) roasting
Last Answer : ANSWER: X -- ELECTROLYSIS
Description : Copper is refined by (1) roasting (2) oxidation (3) electrolysis (4) zone refining
Last Answer : roasting
Description : Where the complaint alleges a defect in the goods which cannot be determined without proper analysis or test of the goods, the sample of goods forwarded to appropriate laboratory for laboratory test. Such types of case finding report within ______days a) 30 b) 40 c) 45 d) 60
Last Answer : c) 45
Description : Which of the following types of sampling involves the researcher determining the appropriate sample sizes for the groups identified as important, and then taking convenience samples from those groups? a. ... sampling b. Quota sampling c. One-stage cluster sampling d. Two-stage cluster sampling
Last Answer : b. Quota sampling
Description : A 0.2 g sample containing copper (II) was analysed iodometrically, where copper (II) is reduced to copper (I) by iodide ions. `2Cu^(2+) +4I^(-)rarr2 C
Last Answer : A 0.2 g sample containing copper (II) was analysed iodometrically, where copper (II) is reduced to copper (I) by ... ` B. `63.5%` C. `53%` D. `37%`
Description : A Sample of a compound contains 64 g of copper and 16 g of oxygen what is the ratio of mass to copper of oxygen?
Last Answer : ?
Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______
Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq.)rarr(1)/(2)Cl_(2) ... )H_(2)(g),E_("cell")^(o.)=0.00V`
Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq)to(1)/(2)Cl_(2 ... 2)H_(2)(g), E_(Cell)^(otimes)=0.00V`
Description : In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?
Last Answer : Need answer
Description : What are the half-reactions for galvanic cell with Ni and Mg electrodes?
Last Answer : Ni2+(aq) + 2e- Ni(s) and Mg(s) Mg2+(aq) + 2e-
Description : What is oxidized in galvanic cell made with silver and nickel electrodes?
Last Answer : The nickel metal(apex)
Description : How to detect damp electrodes?
Last Answer : Pre dry unusually damp electrodes for 30 - 45 minutes before final drying to minimize cracking of the coating that format.
Description : The movement of charged particles towards one of the electrodes under the influence of electrical current is (A) Gel filtration (B) Molecular sieving (C) Gas liquid chromatography (D) Electrophoresis
Last Answer : Answer : D
Description : Substance used for making electrodes is?
Last Answer : Graphite
Description : What maintenance of earth electrodes should be done?
Last Answer : The neighbouring soil to the earth electrode shall be kept moist where necessary, by periodically pouring water through a pipe where fitted along with it or by pouring water in the immediate ... wherever available, shall be carried out to ensure their rigidity and other signs of deterioration.
Description : What is gap between the electrodes in transformer oil testing kit?
Last Answer : 0.1 Inch.
Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given
Last Answer : 30 m/s
Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these
Last Answer : (B) Flow of current through a heating element
Description : An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these
Last Answer : (B) Arc
Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes
Last Answer : (C) As a fuel in furnaces
Description : Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes (C) Blending with highly coking coal to check its swelling which helps in saving coke even walls from damage and to produce high strength coke (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC
Last Answer : (D) 60 KV DC
Description : Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)
Description : In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material
Last Answer : (A) Clamping methods
Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance
Description : Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld
Last Answer : (B) Prevent electrode from contamination
Description : TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare
Last Answer : Option B
Description : Circuit breakers are essentially (a) current carrying contacts called electrodes (b) arc extinguishers (c) circuits to break the system (d) transformers to isolate the two systems (e) any of the above
Last Answer : (a) current carrying contacts called electrodes
Description : Moving tube electrodes apart to decrease interelectrode capacitance causes an increase in the effect of what property?
Last Answer : Transit time