The repeating units of PTFE are (A) Cl2CH-CH3 (B) F2 C = CF2 (C) F3 C-CF3 (D) FClC = CF2

The repeating units of PTFE are
(A) Cl2CH-CH3
(B) F2 C = CF2
(C) F3 C-CF3
(D) FClC = CF2
by

1 Answer

Answer :

(B) F2 C = CF2
by

Related questions

In a co-polymer, the repeating units contain two different monomers. Which of the following is a copolymer? (A) PTFE (B) Buna-S (C) PMMA (D) Polycaprolactam

Description : In a co-polymer, the repeating units contain two different monomers. Which of the following is a copolymer? (A) PTFE (B) Buna-S (C) PMMA (D) Polycaprolactam

Last Answer : (B) Buna-S

The key used to rename file is: a) F3 b) F4 c) F2 d) None of These

Description : The key used to rename file is: a) F3 b) F4 c) F2 d) None of These

Last Answer : c) F2

Short Cut key for Print Preview is: a) Ctrl + F2 b) Ctrl + F3 c) Ctrl + F1 d) None of These

Description : Short Cut key for Print Preview is: a) Ctrl + F2 b) Ctrl + F3 c) Ctrl + F1 d) None of These

Last Answer : a) Ctrl + F2

The following key is used to run a presentation in power point: a) F2 b)F3 c) F4 d) F5 e) None of The Above

Description : The following key is used to run a presentation in power point: a) F2 b)F3 c) F4 d) F5 e) None of The Above

Last Answer : d) F5

Repeating units of hyaluronic acid are (A) N-acetyl glucosamine and D-glucuronic acid (B) N-acetyl galactosamine and D-glucuronic acid (C) N-acetyl glucosamine and galactose (D) N-acetyl galactosamine and L- iduronic acid

Description : Repeating units of hyaluronic acid are (A) N-acetyl glucosamine and D-glucuronic acid (B) N-acetyl galactosamine and D-glucuronic acid (C) N-acetyl glucosamine and galactose (D) N-acetyl galactosamine and L- iduronic acid

Last Answer : A

DNA is composed of repeating units of (a) ribonucleosides (b) deoxyribonucleosides (c) ribonucleotides (d) deoxyribonucleotides.

Description : DNA is composed of repeating units of (a) ribonucleosides (b) deoxyribonucleosides (c) ribonucleotides (d) deoxyribonucleotides.

Last Answer : (d) deoxyribonucleotides.

Is there anyone with Doogee f3 willing to upload me Backup Romky for download without root ??

Description : The mobile phone does not want to connect to the PC under any circumstances to run a flash rom, and I am desperate after a week. Contact me by e-mail: [email protected]

Last Answer : Need Answer

Which of the following refers to a double side band full carrier? A. A3E B. A3J C. F3 D. R3A

Description : Which of the following refers to a double side band full carrier? A. A3E B. A3J C. F3 D. R3A

Last Answer : A. A3E

What is the type of emission use by standard AM radio broadcast? A. A0 B. F3 C. A3 D. A5C

Description : What is the type of emission use by standard AM radio broadcast? A. A0 B. F3 C. A3 D. A5C

Last Answer : C. A3

In MS - Excel, Move to the next worksheet in the workbook can be done through: a) Ctrl + Page Down b) Ctrl + Page Up c) Ctrl + F3 d) None of These

Description : In MS - Excel, Move to the next worksheet in the workbook can be done through: a) Ctrl + Page Down b) Ctrl + Page Up c) Ctrl + F3 d) None of These

Last Answer : a) Ctrl + Page Down

Plexiglass (also called Lucite) because of its high optical transparency is used for making lenses. It is chemically (A) Polymethyl methacrylate (PMMA) (B) Polytetrafluroethylene (PTFE) (C) Polycarbonates (D) Phenolic resins

Description : Plexiglass (also called Lucite) because of its high optical transparency is used for making lenses. It is chemically (A) Polymethyl methacrylate (PMMA) (B) Polytetrafluroethylene (PTFE) (C) Polycarbonates (D) Phenolic resins

Last Answer : (A) Polymethyl methacrylate (PMMA)

Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene

Description : Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene

Last Answer : (B) SBR

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Description : Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Last Answer : (B) Teflon

Buna-S is also known as (A) Teflon (B) PTFE (C) SBR (D) Polycrylates

Description : Buna-S is also known as (A) Teflon (B) PTFE (C) SBR (D) Polycrylates

Last Answer : (C) SBR

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Last Answer : (C) Polytetrafluroethylene (PTFE)

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermoset phenol formaldehyde

Kel-F is a material, which is (A) Chemically known as Polychlorotrifluoroethylene (PTFE) (B) Having excellent chemical & high temperature resistance (upto 200°C) (C) Having elastomeric properties (D) All (A), (B) and (C)

Description : Kel-F is a material, which is (A) Chemically known as Polychlorotrifluoroethylene (PTFE) (B) Having excellent chemical & high temperature resistance (upto 200°C) (C) Having elastomeric properties (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

Teflon (PTFE) is corroded by (A) Hydrochloric acid (10%) (B) Hydrochloric acid (95%) (C) Sulphuric acid (D) None of these

Description : Teflon (PTFE) is corroded by (A) Hydrochloric acid (10%) (B) Hydrochloric acid (95%) (C) Sulphuric acid (D) None of these

Last Answer : (D) None of these

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermosetting phenol-formaldehyde

Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Last Answer : Option A

Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Description : Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Last Answer : B. teflon

Polytetrafluoroethylene (PTFE) is commonly used in sliding bearings. Why?

Description : Polytetrafluoroethylene (PTFE) is commonly used in sliding bearings. Why?

Last Answer : The choice of sliding surface of bearings is of vital importance because the sliding surfaces generate frictional forces which are exerted on the bearings and substructure of the bridge. For ... be designed with dimples to avoid the lubricant from squeezing out under repeated translation movements.

Abbreviation of PTFE is……… 11. Trolley

Description : Abbreviation of PTFE is……… 11. Trolley

Last Answer : Poly Tetra Fluoro Ethylene

Urea is represented as (A) NH2 .CO.NH2 (B) NH3CO.CH3 (C) NH.CO2 .NH (D) NH3 .CO2 .NH3

Description : Urea is represented as (A) NH2 .CO.NH2 (B) NH3CO.CH3 (C) NH.CO2 .NH (D) NH3 .CO2 .NH3

Last Answer : (A) NH2 .CO.NH2

(CH3 C6 H4 )3 PO4 is the chemical formula of (A) Triple superphosphate (B) Tricresyl phosphate (C) Fluorapatite (D) Superphosphate

Description : (CH3 C6 H4 )3 PO4 is the chemical formula of (A) Triple superphosphate (B) Tricresyl phosphate (C) Fluorapatite (D) Superphosphate

Last Answer : (B) Tricresyl phosphate

Tricresyl phosphate is chemically represented as (A) (CH3 C6 H4 )3 PO4 (B) Ca10 (PO4 )3F6 (C) (NH4 )2HPO4 (D) NH4H2PO4

Description : Tricresyl phosphate is chemically represented as (A) (CH3 C6 H4 )3 PO4 (B) Ca10 (PO4 )3F6 (C) (NH4 )2HPO4 (D) NH4H2PO4

Last Answer : (A) (CH3 C6 H4 )3 PO4

Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement(A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Description : Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement. (A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Last Answer : (C) f1 > f2

Is KOC(CH3)3 equivalent to KOH as a base in chemical equations?

Description : Is KOC(CH3)3 equivalent to KOH as a base in chemical equations?

Last Answer : This depends completely on the equation in question. For instance, both are strong bases, so if that's all you're worried about, yeah, they're about equivalent. But potassium tert-butoxide is way bulkier ... not in others. Those are the big differences that jump out to me, but there may be others.

What is the trade name of CH3-OH ?

Description : What is the trade name of CH3-OH ?

Last Answer : The chemical name of CH3-OH is methanol.

Determine the percentage attachment of CH3 ?

Description : Determine the percentage attachment of CH3 ?

Last Answer : Molecular mass of CH₃ = (12 + 3) = Percentage of 15 C = (12/15) × 100 = 60% Percentage of H = (3/15) × 100 = 20 .

Identify type of the intermolecular forces in the following compounds. a. CH3 – OH  b. CH2 = CH2 c. CHCl3

Description : Identify type of the intermolecular forces in the following compounds. a. CH3 – OH  b. CH2 = CH2 c. CHCl3

Last Answer : Identify type of the intermolecular forces in the following compounds. a. CH3 – OH b. CH2 = CH2 c. CHCl3 d. CH2Cl2

Is a CH3 COOH is a element or a compound?

Description : Is a CH3 COOH is a element or a compound?

Last Answer : An element only has one type of atom. Your example has 3different types of atom. Compound.

What is the name for CH3-CHBr-CH2-CH3?

Description : What is the name for CH3-CHBr-CH2-CH3?

Last Answer : This compound is bromobutane.

What is the name for CH3-CHBr-CH2-CH3?

Description : What is the name for CH3-CHBr-CH2-CH3?

Last Answer : This compound is bromobutane.

Is a CH3 COOH is a element or a compound?

Description : Is a CH3 COOH is a element or a compound?

Last Answer : An element only has one type of atom. Your example has 3different types of atom. Compound.

Which molecule is more likely to exist in nature a molecule of CH3 or a molecule of CH4 Explain?

Description : Which molecule is more likely to exist in nature a molecule of CH3 or a molecule of CH4 Explain?

Last Answer : The molecule of methane is more stable, carbon is tetravalent.

What is the molar mass of : (a) lead acetate, Pb(CH3 COO)2?

Description : What is the molar mass of : (a) lead acetate, Pb(CH3 COO)2?

Last Answer : also known as lead acetate, lead diacetate, plumbous acetate, sugar of lead, lead sugar, salt of Saturn, or Goulard's powder, is a white crystalline chemical compound with a sweet taste. It is made by treating lead(II) oxide with acetic acid.

Hinge region, the region of Ig molecule which is flexible and more exposed to enzymes is the (A) Region between first and second constant regions of H chain (domains CH1 and CH2) (B) Region between second and third constant regions of H chain (CH2 and CH3) (C) Variable regions of H chain (D) Variable regions of L chain

Description : Hinge region, the region of Ig molecule which is flexible and more exposed to enzymes is the (A) Region between first and second constant regions of H chain (domains CH1 and CH2) (B) Region between second and ... H chain (CH2 and CH3) (C) Variable regions of H chain (D) Variable regions of L chain

Last Answer : Answer : A

The class specific function of the different immunoglobulin molecules is constituted by (A) Variable region of L chain (B) Constant region of H chain (C) Variable region of H chain (D) Constant region particularly CH2 and CH3 of H chain

Description : The class specific function of the different immunoglobulin molecules is constituted by (A) Variable region of L chain (B) Constant region of H chain (C) Variable region of H chain (D) Constant region particularly CH2 and CH3 of H chain

Last Answer : Answer : D

The number of N-MC groups in alkaloids is best estimate with the help of (A) HI (B) H2SO4 (C) (CH3CO)2 CO (D) CH3 Mg I

Description : The number of N-MC groups in alkaloids is best estimate with the help of (A) HI (B) H2SO4 (C) (CH3CO)2 CO (D) CH3 Mg I

Last Answer : Answer : A

The formula C6H5-CO-CH3 represents?

Description : The formula C6H5-CO-CH3 represents?

Last Answer : Acetophenone

The organic reaction represented by equation CH3 - CH = O + H2NOH gives CH3 - CH - NH + H20O is an example of?

Description : The organic reaction represented by equation CH3 - CH = O + H2NOH gives CH3 - CH - NH + H20O is an example of?

Last Answer : a condensation reaction

Write the IUPAC name for: (CH3)2CHCH(OH)CH2C(CH3)3,identify the functional group and type of compound.

Description : Write the IUPAC name for: (CH3)2CHCH(OH)CH2C(CH3)3,identify the functional group and type of compound.

Last Answer : Ans. 2,5,5-trimethylhexan-3-ol, alcohol, secondary alcohol

From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Description : From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Last Answer : a) CH4, H2, NH3 and water vapor at 800°C

Which of the following compounds will dissolve in aqueous NaOH after undergoing reaction with Hinsberg reagent? (a) CH3CH2NH2 (b) (CH3CH2)2NH (c) (CH3CH2)3N (d) (CH3)3N

Description : Which of the following compounds will dissolve in aqueous NaOH after undergoing reaction with Hinsberg reagent? (a) CH3CH2NH2 (b) (CH3CH2)2NH (c) (CH3CH2)3N (d) (CH3)3N

Last Answer : CH3CH2NH2

Which of the following terms best describes the compound below? CH3(CH2)26CO2CH2(CH2)32CH3 (a) a fa(b) a wax (c) a terpene (d) an unsaturated triglyceridet

Description : Which of the following terms best describes the compound below? CH3(CH2)26CO2CH2(CH2)32CH3 (a) a fat (b) a wax (c) a terpene (d) an unsaturated triglyceride

Last Answer : a wax

Which of the following terms best describes the compound below? CH3(CH2)7CH=CH(CH2)7CO2H (a) an unsaturated fatty acid (b) a triglyceride (c) a synthetic detergent (d) a micelle

Description : Which of the following terms best describes the compound below? CH3(CH2)7CH=CH(CH2)7CO2H (a) an unsaturated fatty acid (b) a triglyceride (c) a synthetic detergent (d) a micelle

Last Answer : an unsaturated fatty acid

Which of the following terms best describes the compound below? CH3(CH2)12CO2H (a) a fatty acid (b) an oil (c) a wax (d) a soap

Description : Which of the following terms best describes the compound below? CH3(CH2)12CO2H (a) a fatty acid (b) an oil (c) a wax (d) a soap

Last Answer : a fatty acid