The smaller the f rating, the _____ light that lens can take in. A. More B. Intense C. Less D. Same

The smaller the f rating, the _____ light that lens can take in.
A. More
B. Intense
C. Less
D. Same
by

1 Answer

Answer :

A. More
by

Related questions

An object farther from a converging lens than its focal point always has a/an _____ image. a. Inverted b. The same in size c. Virtual d. Smaller size

Description : An object farther from a converging lens than its focal point always has a/an _____ image. a. Inverted b. The same in size c. Virtual d. Smaller size

Last Answer : a. Inverted

An object nearer to a converging lens than its focal point always has a/an ______ image. a. Inverted b. The same in size c. Virtual d. Smaller size

Description : An object nearer to a converging lens than its focal point always has a/an ______ image. a. Inverted b. The same in size c. Virtual d. Smaller size

Last Answer : c. Virtual

An object farther from a converging lens than its focal point always has an _______ image. A. virtual B. the same in size C. inverted D. smaller size

Description : An object farther from a converging lens than its focal point always has an _______ image. A. virtual B. the same in size C. inverted D. smaller size

Last Answer : C. inverted

An object farther from a converging lens than its focal point always has a/an _____ image. ∙ a. Inverted ∙ b. The same in size ∙ c. Virtual ∙ d. Smaller size

Description : An object farther from a converging lens than its focal point always has a/an _____ image. ∙ a. Inverted ∙ b. The same in size ∙ c. Virtual ∙ d. Smaller size

Last Answer : a. Inverted

If a mirror is used to reflect light, the reflected light angle is ____ as the incident angle a. Smaller b. Larger c. The same d. Independent

Description : If a mirror is used to reflect light, the reflected light angle is ____ as the incident angle a. Smaller b. Larger c. The same d. Independent

Last Answer : c. The same

How many removal examination (s) will be given to an examinee who obtains a passing rating in the majority of the subjects but obtains a rating in the other subject (s) below seventy percent (70%) but not lower than sixty percent (60%)? A. 1 B. 3 C. 2 D. Unlimited

Description : How many removal examination (s) will be given to an examinee who obtains a passing rating in the majority of the subjects but obtains a rating in the other subject (s) below seventy percent (70%) but not lower than sixty percent (60%)? A. 1 B. 3 C. 2 D. Unlimited

Last Answer : A. 1

RADAR means A. Radio detection and rating B. Radio detection and ranging C. Radio distance and ranging D. Radio delay and ranging

Description : RADAR means A. Radio detection and rating B. Radio detection and ranging C. Radio distance and ranging D. Radio delay and ranging

Last Answer : B. Radio detection and ranging

An object nearer to a converging lens than its focal point always has a/an ______ image. ∙ a. Inverted ∙ b. The same in size ∙ c. Virtual ∙ d. Smaller size

Description : An object nearer to a converging lens than its focal point always has a/an ______ image. ∙ a. Inverted ∙ b. The same in size ∙ c. Virtual ∙ d. Smaller size

Last Answer : c. Virtual

A thin double-concave lens produces images which are: w) larger than the object x) smaller than the object y) the same size as the object z) one cannot tell from this information

Description : A thin double-concave lens produces images which are: w) larger than the object x) smaller than the object y) the same size as the object z) one cannot tell from this information

Last Answer : ANSWER: X -- SMALLER THAN THE OBJECT

A positive lens with a focal length of 10 cm forms a real image of an object 20 am away from the lens. How far is the real image from the lens? a. 5 cm b. 10 cm c. 15 cm d. 20 cm

Description : A positive lens with a focal length of 10 cm forms a real image of an object 20 am away from the lens. How far is the real image from the lens? a. 5 cm b. 10 cm c. 15 cm d. 20 cm

Last Answer : d. 20 cm

The real image formed by a spherical mirror is ____ relative to its object a. Erect b. Inverted c. Smaller d. Larger

Description : The real image formed by a spherical mirror is ____ relative to its object a. Erect b. Inverted c. Smaller d. Larger

Last Answer : d. Larger

A method of multiple accessing where a given RF channel bandwidth is divided inot smaller frequency band. A. CDMA B. ANIK-D C. TDMA D. FDMA

Description : A method of multiple accessing where a given RF channel bandwidth is divided inot smaller frequency band. A. CDMA B. ANIK-D C. TDMA D. FDMA

Last Answer : D. FDMA

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

Assertion:- `Mg^(2+)` is smaller atomic size then `F^(-)` Resaon :- `Mg^(2+)` has less number of `e^(-)s` than `F^(-)`

Description : Assertion:- `Mg^(2+)` is smaller atomic size then `F^(-)` Resaon :- `Mg^(2+)` has less number of `e^(-)s` than `F^(-)`

Last Answer : Assertion:- `Mg^(2+)` is smaller atomic size then `F^(-)` Resaon :- `Mg^(2+)` has less ... Reason is False. D. If both Assertion & Reason are false

When object is placed _______ in front of convex lens than image formed is virtual, erect, magnified and on same side beyond F . a) between optical centre and F b)At F c)between F and 2F d)2F

Description : When object is placed _______ in front of convex lens than image formed is virtual, erect, magnified and on same side beyond F . a) between optical centre and F b)At F c)between F and 2F d)2F

Last Answer : a) between optical centre and F

In case of convex lens when the image formed is real, inverted and same size as the object then the object should have been at ______ position of lens. a) infinity b)focus c)2F d)between F and 2F

Description : In case of convex lens when the image formed is real, inverted and same size as the object then the object should have been at ______ position of lens. a) infinity b)focus c)2F d)between F and 2F

Last Answer : c)2F

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? a. Less than b. Grater than c. Equal to d. Zero

Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? a. Less than b. Grater than c. Equal to d. Zero

Last Answer : b. Grater than

Which one responds to intense light ?

Description : Which one responds to intense light ?

Last Answer : Eyes respond to intense light

Single frequency light is called ∙ A. pure ∙ B. intense ∙ C. coherent ∙ D. monochromatic

Description : Single frequency light is called ∙ A. pure ∙ B. intense ∙ C. coherent ∙ D. monochromatic

Last Answer : D. monochromatic

Single-frequency light is called ∙ a. Pure ∙ b. Intense ∙ c. Coherent ∙ d. Monochromatic

Description : Single-frequency light is called ∙ a. Pure ∙ b. Intense ∙ c. Coherent ∙ d. Monochromatic

Last Answer : d. Monochromatic

Lasers are used to produce a) Intense beam of visible light b) monochromatic beam of visible light c) coherent beam of visible light d) All of them

Description : Lasers are used to produce a) Intense beam of visible light b) monochromatic beam of visible light c) coherent beam of visible light d) All of them

Last Answer : d) All of them

In the Tyndall Effect, the intensity of scattered radiation is inversely proportional to the fourth power of the wavelength. Which one of the following colors of light would exhibit the most intense Tyndall scattering? w) yellow x) green y) orange z) violet

Description : In the Tyndall Effect, the intensity of scattered radiation is inversely proportional to the fourth power of the wavelength. Which one of the following colors of light would exhibit the most intense Tyndall scattering? w) yellow x) green y) orange z) violet 

Last Answer : ANSWER: Z -- VIOLET 

Which coaxial connector is a more complex and expensive but do a better job in maintaining the electrical characteristics of the cable through the interconnections? A. N-type connector B. F-type connector C.BNC D. PL-259

Description : Which coaxial connector is a more complex and expensive but do a better job in maintaining the electrical characteristics of the cable through the interconnections? A. N-type connector B. F-type connector C.BNC D. PL-259

Last Answer : A. N-type connector

In data communication the transmission of binary signals will require _______. A. Same bandwidth as analog B. More bandwidth than analog C. Less bandwidth than analog D. Bigger cable diameter

Description : In data communication the transmission of binary signals will require _______. A. Same bandwidth as analog B. More bandwidth than analog C. Less bandwidth than analog D. Bigger cable diameter

Last Answer : B. More bandwidth than analog

If the evaporator temperature of a plant is lowered, keeping the condenser temperature constant, the h.p. of compressorrequired will be (a) same (b) more (c) less (d) more/less depending on rating

Description : If the evaporator temperature of a plant is lowered, keeping the condenser temperature constant, the h.p. of compressorrequired will be (a) same (b) more (c) less (d) more/less depending on rating

Last Answer : Ans: b

____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier

Description : ____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier

Last Answer : C. L carrier

Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Description : Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Last Answer : B. F-type connector

Which of the following coaxial cable connectors is called the UHF connector? A. PL-259 B. BNC C. N-type connector D. F connector

Description : Which of the following coaxial cable connectors is called the UHF connector? A. PL-259 B. BNC C. N-type connector D. F connector

Last Answer : A. PL-259

A third symbol emission which represent television. A. C B. D C. F D. A

Description : A third symbol emission which represent television. A. C B. D C. F D. A

Last Answer : C. F

A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Description : A third symbol radio emission which represent telephone transmission including sound broadcasting. A. W B. F C. C D. E

Last Answer : D. E

Which region of the ionosphere is mainly responsible for long distance night time communication? A. A layer B. D layer C. E layer D. F layer

Description : Which region of the ionosphere is mainly responsible for long distance night time communication? A. A layer B. D layer C. E layer D. F layer

Last Answer : D. F layer

Reference noise temperature. A. 70 deg F B. 30 deg C C. 290 Kelvin D. 25 deg C

Description : Reference noise temperature. A. 70 deg F B. 30 deg C C. 290 Kelvin D. 25 deg C

Last Answer : C. 290 Kelvin

A microwave communications system space loss calculation formula is A. 92.4 + 10 log f +20 log d B. 94.2 + 10 log f +20 log d C. 92.4 + 20 log f +20 log d D. 94.2 + 20 log f +20 log d

Description : A microwave communications system space loss calculation formula is A. 92.4 + 10 log f +20 log d B. 94.2 + 10 log f +20 log d C. 92.4 + 20 log f +20 log d D. 94.2 + 20 log f +20 log d

Last Answer : C. 92.4 + 20 log f +20 log d

When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be used? e) Any applicable pressure rating. f) The lowest must be used. g) The highest must be used. h) Flanges may only meet one material specification.

Description : When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be ... . g) The highest must be used. h) Flanges may only meet one material specification.

Last Answer : e) Any applicable pressure rating.

A small hole in a sheet of aluminum foil is used to diffract yellow light both under water and in a vacuum. Which is true? w) light diffracts less in the water because its wavelength is larger. x) light diffracts less in the water because its wavelength is smaller. y) light diffracts more in the water because its wavelength is larger. z) light diffracts more in the water because its wavelength is smaller.

Description : A small hole in a sheet of aluminum foil is used to diffract yellow light both under water and in a vacuum. Which is true? w) light diffracts less in the water because its wavelength is ... because its wavelength is larger. z) light diffracts more in the water because its wavelength is smaller.

Last Answer : ANSWER: X -- LIGHT DIFFRACTS LESS IN THE WATER BECAUSE ITS WAVELENGTH IS SMALLER

_____ polarization is employed in AM broadcasting A. Horizontal B. Vertical C. Circular D. Omnidirectional

Description : _____ polarization is employed in AM broadcasting A. Horizontal B. Vertical C. Circular D. Omnidirectional

Last Answer : B. Vertical

_____ is an antenna made up of a number of full wavelengths A. Elementary doublet B. Log-periodic C. Long wire D. Whip

Description : _____ is an antenna made up of a number of full wavelengths A. Elementary doublet B. Log-periodic C. Long wire D. Whip

Last Answer : C. Long wire

_____ is the angle between the half-power radiation points A. Critical angle B. Beamwidth C. Angle of elevation D. Azimuth

Description : _____ is the angle between the half-power radiation points A. Critical angle B. Beamwidth C. Angle of elevation D. Azimuth

Last Answer : B. Beamwidth

_____ of an antenna is a measure of how the antenna concentrates its radiated power in a given direction. A. Efficiency B. Power C. Gain D. Polarization

Description : _____ of an antenna is a measure of how the antenna concentrates its radiated power in a given direction. A. Efficiency B. Power C. Gain D. Polarization

Last Answer : C. Gain

If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Description : If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Last Answer : C. 100 μV/m

The antenna radiates _____ polarized waves when the transmitter antenna is horizontally installed. A. Vertically B. negatively C. horizontally D. circularly

Description : The antenna radiates _____ polarized waves when the transmitter antenna is horizontally installed. A. Vertically B. negatively C. horizontally D. circularly

Last Answer : C. horizontally

_____ is an open-ended slot antenna A. Helical antenna B. Rhombic antenna C. Notch antenna D. Cassegrain antenna

Description : _____ is an open-ended slot antenna A. Helical antenna B. Rhombic antenna C. Notch antenna D. Cassegrain antenna

Last Answer : C. Notch antenna

_____ is the horizontal pointing angle of an antenna A. Azimuth B. Angle of elevation C. Right angle D. Beamwidth

Description : _____ is the horizontal pointing angle of an antenna A. Azimuth B. Angle of elevation C. Right angle D. Beamwidth

Last Answer : A. Azimuth

_____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Description : _____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Last Answer : A. Antenna array

All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Description : All elements in a beam _____ antennas are in line A. collinear B. yagi C. broadside array D. log-periodic

Last Answer : A. collinear

A horizontal antenna is _____. A. vertically polarized B. horizontally polarized C. centrally polarized D. circularly polarized

Description : A horizontal antenna is _____. A. vertically polarized B. horizontally polarized C. centrally polarized D. circularly polarized

Last Answer : B. horizontally polarized

_____ is the amount of uncertainty in a system of symbols A. Bandwidth B. Enthalpy C. Entropy D. Quantum

Description : _____ is the amount of uncertainty in a system of symbols A. Bandwidth B. Enthalpy C. Entropy D. Quantum

Last Answer : C. Entropy

The best solution to fading is _____. A. space diversity B. frequency diversity C. polarization diversity D. wavelength diversity

Description : The best solution to fading is _____. A. space diversity B. frequency diversity C. polarization diversity D. wavelength diversity

Last Answer : A. space diversity

A reading of -50 dBm on the disturbing pair, and -80 on the disturbed pair equals _____ dB of crosstalk coupling. A. 20 B. 30 C. 60 D. 25

Description : A reading of -50 dBm on the disturbing pair, and -80 on the disturbed pair equals _____ dB of crosstalk coupling. A. 20 B. 30 C. 60 D. 25

Last Answer : B. 30

Industrial noise frequency is between _____. A. 0 to 10 KHz B. 160 MHz to 200 MHz C. 15 to 160 MHz D. 200 to 3000 MHz

Description : Industrial noise frequency is between _____. A. 0 to 10 KHz B. 160 MHz to 200 MHz C. 15 to 160 MHz D. 200 to 3000 MHz

Last Answer : C. 15 to 160 MHz