What is the phase coefficient in radians per unit length of a transmission line at the frequency
of 10 MHz if the velocity of propagation is 2.5x108 m/s?
A. 0.25
B. 2.5
C. 0.35
D. 3.5

1 Answer

Answer :

A. 0.25

Related questions

Description : If the operating frequency is 450 MHz what length of a pair of conductors is considered to be a transmission line? A. 2.19 ft B. 2.19 m C. 0.219 ft D. 0.219 m

Last Answer : C. 0.219 ft

Description : What would be the physical length of a tpical coaxial transmission line that is electrically one-quarter wavelength long at 14.1 MHz? A. 20 meters B. 3.51 meters C. 2.33 meters D. 0.25 meter

Last Answer : B. 3.51 meters

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz

Last Answer : D. 300 MHz to 3 GHz

Description : Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz

Last Answer : B. 3 MHz to 30 MHz

Description : Which of the following frequency bands is best suited for ground wave propagation? A. 30 to 300 kHz B. 300 kHz to 3 MHz C. 3 MHz to 30 MHz D. 30 MHz to 300 MHz

Last Answer : A. 30 to 300 kHz

Description : The frequency of operation of a dipole antenna cut to length of 3.4 m. A. 42.9 MHz B. 61.3 MHz C. 38.5 MHz D. 53.5 MHz

Last Answer : A. 42.9 MHz

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

Description : The frequency of operation of a dipole antenna cut to a length of 3.4 m. A. 88 MHz B. 44 MHz C. 22 MHz D. 11 MHz

Last Answer : B. 44 MHz

Description : Assume a frequency of 4 MHz, determine the phase shift offered by the line in the above problem. A. 108.5˚ B. 106.5˚ C. 115.5˚ D. 166.5˚

Last Answer : D. 166.5˚

Description : Which of the following fall under the high frequency band of the radio spectrum? A. 8.2345 MHz B. 150.50 MHz C. 2.4555 MHz D. 35.535 MHz

Last Answer : A. 8.2345 MHz

Description : What is the actual length in feet of a one-quarter wavelength of a coax with a velocity factor of 0.68 to 30 MHz? A. 19.26 B. 5.6 C. 17.82 D. 16.97

Last Answer : B. 5.6

Description : If the velocity of propagation in a certain medium is 200x106 m/s, what is its refractive index? A. 1.3 B. 1.5 C. 1.27 D. 0.67

Last Answer : B. 1.5

Description : What is actual length in feet of a one-half wavelength of a coax with a velocity factor of 0.59 at 26 MHz? A. 11.16 B. 40.29 C. 42.46 D. 46.28

Last Answer : A. 11.16

Description : What is the actual length in feet of a one-half wavelength of a coax with a velocity factor of 0.63 at 28 MHz? A. 44.28 B. 43.46 C. 11.07 D. 46.27

Last Answer : C. 11.07

Description : What is the actual length in feet of a one-quarter wavelength of a coax with a velocity factor of 0.695 at 45 MHz? A. 17.82 B. 19.26 C. 16.28 D. 16.97

Last Answer : C. 16.28

Description : How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz

Last Answer : B. 1.25 MHz

Description : At a certain time, the MUF for transmission at an angle of incidence of 75° is 17 MHz. What is the critical frequency? A. 4.4 MHz B. 3.5 MHz C. 6.5 MHz D. 1.5 MHz

Last Answer : A. 4.4 MHz

Description : This type of transmission permits communication in the frequency range from 30 to 60 MHz and over distances from about 1000 to 2000 km. A. Troposcatter B. Ionospheric scatter C. Ducting D. Microwave

Last Answer : B. Ionospheric scatter

Description : Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter

Last Answer : B. Ionospheric scatter

Description : The phase constant of a wave propagation with frequency of 35 radian/sec and time delay of 7.5 sec is a) 4.66 b) 262.5 c) 46.6 d) 26.25

Last Answer : b) 262.5

Description : What is the refractive index of an ionospheric layer with 100x105 free electrons per m3 ? Assume frequency to be at 20 MHz. A. 0.99 B. 0.15 C. 0.78 D. 0.85

Last Answer : A. 0.99

Description : A transmission line consisting of two conductors that have equal resistance per unit length. A. Unbalanced line B. Open-wire line C. Balanced line D. Coaxial line

Last Answer : C. Balanced line

Description : Assuming a UHF frequency range of 405.0125 MHz to 405.0875 MHz at 25 kHz channeling plan, how many channels can you produce? A. 2.5 ch. B. 2 ch. C. 4 ch. D. 3 ch.

Last Answer : D. 3 ch.

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

Description : Assume a frequency range of 405.0125 MHz to 405.0875 MHz and 25 kHz channeling plan, determine the center frequency of the second channel from the lower limit. A. 405.030 MHz B. 405.025 MHz C. 405.050 MHz D. 405.075 MHz

Last Answer : C. 405.050 MHz

Description : Assume a frequency range of 401.000 MHz to 401.050 MHz, if you apply 25 kHz channeling plan, determine the center frequency of the first channel from the lower limit. A. 401.010 MHz B. 401.0125 MHz C. 401.025 MHz D. 401.00625 MHz

Last Answer : B. 401.0125 MHz

Description : Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Last Answer : A. 1.0025 MHz

Description : Calculate the velocity of wave propagation in a conductor with frequency 5 x 10 8 rad/s and phase constant of 3 x 10 8 units. a) 3/5 b) 15 c) 5/3 d) 8

Last Answer : c) 5/3

Description : Industrial noise frequency is between _____. A. 0 to 10 KHz B. 160 MHz to 200 MHz C. 15 to 160 MHz D. 200 to 3000 MHz

Last Answer : C. 15 to 160 MHz

Description : Industrial noise frequency is between _________. A. 200 to 3000 Mhz B. 15 to 160 Mhz C. 0 to 10 Khz D. 20 Ghz

Last Answer : B. 15 to 160 Mhz

Description : Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : sky

Description : Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : ground

Description : What determines the velocity factor in a transmission line? A. The termination impedance B. The line length C. Dielectrics in the line D. The center conductor resistivity

Last Answer : C. Dielectrics in the line

Description : What determines the velocity factor in transmission line? A. The center conductor resistivity B. Dielectrics in the line C. The termination impedance D. The line length

Last Answer : B. Dielectrics in the line

Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz

Last Answer : D. 500 MHz

Description : What is the physical length of the above transmission line at 3/8λ long? A.0.82 m B. 0.82 ft C. 0.82 in D. 0.82 cm

Last Answer : B. 0.82 ft

Description : A travelling wave passes a point of observation where the time interval between successive crests is 0.2 s. Which of the following is then true? (a) The wavelength is 5 m (b) The wavelength is 0.2 m (c) The velocity of propagation is 5 m/s (d) The frequency of 5 Hz.

Last Answer : Ans:(d)

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

Description : A radio frequency in the ultra high frequency band of the radio spectrum band. A. 235.50 MHz B. 450.50 MHz C. 150.50 GHz D. 0.31250 GHz

Last Answer : D. 0.31250 GHz

Description : What is the gain, in dB of a helical antenna with diameter of λ/3, 10 turns at pitch of λ/4, used at 100 MHz? A. 16 B. 41.1 C. 31.4 D. 1.25

Last Answer : A. 16

Description : The sound energy per unit area at right angles to the propagation direction per unit time. A. Sound intensity B. Loudness C. Coherence D. Sound stress

Last Answer : A. Sound intensity

Description : The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Last Answer : A. 273 ms

Description : If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Last Answer : D. 6 watts

Description : What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259

Last Answer : B. 258

Description : What is the approximate critical frequency of the E layer? A. 4 MHz B. 5 MHz C. 6 MHz D. 3 MHz

Last Answer : A. 4 MHz

Description : A radio communications link is to be established via the ionosphere. The maximum virtual height of the layer is 100 km at the midpoint of the path and the critical frequency is 2 MHz. The distance between stations is 600 ... optimum working frequency? A. 6.32 MHz B. 2.1 MHz C. 5.4 MHz D. 1.8 MHz

Last Answer : C. 5.4 MHz

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz