Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Signals with a frequency below 2 MHz use _______ propagation.
A)
ground
B)
sky
C)
line-of-sight
D)
none of the above
by

1 Answer

Answer :

ground
by

Related questions

Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : sky

Signals with a frequency above30 MHz use_______propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency above30 MHz use_______propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : line-of-sight

The VLF and LF bauds use .............. propagation for communication. (A) Ground (B) Sky (C) Line of sight (D) Space

Description : The VLF and LF bauds use .............. propagation for communication. (A) Ground (B) Sky (C) Line of sight (D) Space

Last Answer : Answer: A Explanation: VLF (Very Low Frequency) LF (Low Frequency) In general there are three type of propagation.1.Ground Propagation 2.Sky propagation 3.Line-of-sight propagation ... portion of the atmosphere. These low-frequency signals travel in all directions from the transmitting antenna.

ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Description : ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Last Answer : A. space or direct

Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz

Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz

Last Answer : D. 300 MHz to 3 GHz

Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz

Description : Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz

Last Answer : B. 3 MHz to 30 MHz

Which of the following frequency bands is best suited for ground wave propagation? A. 30 to 300 kHz B. 300 kHz to 3 MHzC. 3 MHz to 30 MHz D. 30 MHz to 300 MHz

Description : Which of the following frequency bands is best suited for ground wave propagation? A. 30 to 300 kHz B. 300 kHz to 3 MHz C. 3 MHz to 30 MHz D. 30 MHz to 300 MHz

Last Answer : A. 30 to 300 kHz

What is the phase coefficient in radians per unit length of a transmission line at the frequency of 10 MHz if the velocity of propagation is 2.5x108 m/s? A. 0.25 B. 2.5 C. 0.35 D. 3.5

Description : What is the phase coefficient in radians per unit length of a transmission line at the frequency of 10 MHz if the velocity of propagation is 2.5x108 m/s? A. 0.25 B. 2.5 C. 0.35 D. 3.5

Last Answer : A. 0.25

Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very high-frequency waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Description : Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very ... waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Last Answer : (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz.

A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Description : A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Last Answer : D. 5925 MHz

An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Description : An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Last Answer : Maximum time taken for all flip-flops to stabilize is 75ns x 8 + 50 = 650ns. Frequency of operation must be less than 1/650ns = 1.5 MHz.

Frequency of sky waves is A. less then 3 MHzB. more than 3 MHz C. less than 2 MHz D. exactly 2 MHz

Description : Frequency of sky waves is A. less then 3 MHzB. more than 3 MHz C. less than 2 MHz D. exactly 2 MHz

Last Answer : . more than 3 MHz

What frequency range is used for FM radio transmission? A. Very Low Frequency : 3 kHz to 30. kHz B. Low Frequency :30 kHz to 300 kHz C. High Frequency :3 MHz to 30 MHz D. Very High Frequency : 30 MHz to 300 MHz E. None of the above

Description : What frequency range is used for FM radio transmission? A. Very Low Frequency : 3 kHz to 30. kHz B. Low Frequency :30 kHz to 300 kHz C. High Frequency :3 MHz to 30 MHz D. Very High Frequency : 30 MHz to 300 MHz E. None of the above

Last Answer : Very High Frequency : 30 MHz to 300 MHz

The rhombic antenna is primarily used for A. ground wave propagation B. space wave propagation C. ionosphere scatter propagation D. sky wave propagation

Description : The rhombic antenna is primarily used for A. ground wave propagation B. space wave propagation C. ionosphere scatter propagation D. sky wave propagation

Last Answer : D. sky wave propagation

The decimetric wave is using what method of propagation? A. Ground wave B. Space wave C. Sky wave D. Tropospheric wave

Description : The decimetric wave is using what method of propagation? A. Ground wave B. Space wave C. Sky wave D. Tropospheric wave

Last Answer : B. Space wave

Compare ground wave propagation. Sky wave propagation and space wave propagation.

Description : Compare ground wave propagation. Sky wave propagation and space wave propagation.

Last Answer : Sr. N o Parameter Ground Wave Propagation Sky Wave Propagation Space wave Propagation 1 Frequency Range 30 kHz to 3 MHz  3 MHz to 30 MHz frequencies above 30 MHz 2 ... These waves have line of sight propagation, ... 6 Fading Problem less Severe Less

The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Description : The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Last Answer : A. 273 ms

A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Description : A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Last Answer : C. Troposcatter

Describe line of sight propagation in brief.

Description : Describe line of sight propagation in brief.

Last Answer : Line of sight propagation or Space wave propagation:-   Explanation:- Space wave propagation of electromagnetic energy includes radiated energy that travels in the lower few miles of Earth's ... waves reflected by Earth's surface as they propagate between the transmit and receive antennas. 

To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Description : To obtain the most reliable sky wave propagation the ____ should be used. A. Lowest useable frequency (LUF). B. Maximum useable frequency (MUF). C. Optimum useable frequency (OUF). D. Critical frequency

Last Answer : C. Optimum useable frequency (OUF).

Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Description : Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Last Answer : b.topreventsky-wave andupper rayinterference

Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Description : Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Last Answer : Sr. No  Parameters Sky Wave Propagation Space Wave Propagation 1 Frequency range 3 MHz to 30 MHz  Above 30 MHz 2 Effect of fading Problem of fading is ... horizontally Polarized 4 Application RadioBroadcasting (SW Range) Used for TV and FM broadcasting

________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Distortion

The distance a simple signal can travel in one period is called ………… A. Wavelength B. propagation speed C. Frequency D. both a and b

Description : The distance a simple signal can travel in one period is called ………… A. Wavelength B. propagation speed C. Frequency D. both a and b

Last Answer : A. Wavelength

Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave b. loss of line-of-sight conditions c. maximumsingle-hop distance limitation d. tilting

Description : Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave b. loss of line-of-sight conditions c. maximumsingle-hop distance limitation d. tilting

Last Answer : d. tilting

In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Description : Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Last Answer : digital; analog

_______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Digital

_______ allow insertion and extraction of signals. A) regenerators B) ADMs C) STS multiplexer/demultiplexers D) none of the above

Description : _______ allow insertion and extraction of signals. A) regenerators B) ADMs C) STS multiplexer/demultiplexers D) none of the above

Last Answer : regenerators

Coaxial lines are used on those systems operating _______. A. Below 2 GHz B. At 300 MHz C. Above 10KHz D. Above 10GHz

Description : Coaxial lines are used on those systems operating _______. A. Below 2 GHz B. At 300 MHz C. Above 10KHz D. Above 10GHz

Last Answer : A. Below 2 GHz

The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz

Description : The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz

Last Answer : B. 30 to 300 GHz

___ cable can carry signals ofhigher frequency ranges than_____ cable. A) Twisted-pair; fiber-optic B) Coaxial; fiber-optic C) Coaxial; twisted-pair D) none of the abov

Description : ___ cable can carry signals ofhigher frequency ranges than_____ cable. A) Twisted-pair; fiber-optic B) Coaxial; fiber-optic C) Coaxial; twisted-pair D) none of the abov

Last Answer : Coaxial; twisted-pair

Before data can be transmitted, they must be transformed to________. A) periodic signals B) electromagnetic signals C) aperiodic signals D) low-frequency sine waves

Description : Before data can be transmitted, they must be transformed to________. A) periodic signals B) electromagnetic signals C) aperiodic signals D) low-frequency sine waves

Last Answer : electromagnetic signals

Demodulation is the process of A. converting digital signals toanalog signals B. converting analogsignals todigital signals C. combining many low speed channels into onehigh speed channel D. dividing the high-speed signals into frequency bands E. None of the above

Description : Demodulation is the process of A. converting digital signals toanalog signals B. converting analogsignals todigital signals C. combining many low speed channels into onehigh speed channel D. dividing the high-speed signals into frequency bands E. None of the above

Last Answer : converting analogsignals todigital signals

The absolute value of a signal's highest intensity is called………. A. Peak Amplitude B. Frequency C. Phase D. Both a and c

Description : The absolute value of a signal's highest intensity is called………. A. Peak Amplitude B. Frequency C. Phase D. Both a and c

Last Answer : A. Peak Amplitude

Compare ground wave and space wave propagation on the basis of: (i) Frequency range (ii) Method of propagation.

Description : Compare ground wave and space wave propagation on the basis of: (i) Frequency range (ii) Method of propagation.

Last Answer : Compare ground wave and space wave propagation on the basis of: (i) Frequency range (ii) Method of propagation.

What is the name of the new color laptop computer which is powered by a 386 processor at 33 MHz and is built by Epson? a. AX3/33 b. NEC-20 c. Magnum 2000 d. HCL-3000

Description : What is the name of the new color laptop computer which is powered by a 386 processor at 33 MHz and is built by Epson? a. AX3/33 b. NEC-20 c. Magnum 2000 d. HCL-3000

Last Answer : AX3/33

What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above

Description : What is the bandwidth ofa signal that ranges from 1 MHz to4 MHz? A) 4 MHz B) 1 KHz C) 3 MHz D) none of the above

Last Answer : 3 MHz

A periodic signal completes onecycle in 0.001 s. What is thefrequency? A) 1 Hz B) 100 Hz C) 1 KHz D) 1 MHz

Description : A periodic signal completes onecycle in 0.001 s. What is thefrequency? A) 1 Hz B) 100 Hz C) 1 KHz D) 1 MHz

Last Answer : 1 KHz

Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Description : Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Last Answer : A. transmission over power lines and by ground wave

In ________, we combine signals from different sources to fit into a larger bandwidth. A) spread spectrum B) line coding C) block coding D) none of the above

Description : In ________, we combine signals from different sources to fit into a larger bandwidth. A) spread spectrum B) line coding C) block coding D) none of the above

Last Answer : spread spectrum

Modulation is theprocessof A. converting analogsignals todigital signals B. converting digital signals toanalog signals C. Multiplexing various signals intohigh speed line signals D. performing data encryption

Description : Modulation is theprocessof A. converting analogsignals todigital signals B. converting digital signals toanalog signals C. Multiplexing various signals intohigh speed line signals D. performing data encryption

Last Answer : converting digital signals toanalog signals

Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Description : Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Last Answer : converting analog to digital signals

Which of the answers listed below best completes the statement: The rate at which any part of a wave travels from one place to another determines the wave's: w) propagation velocity x) period y) amplitude z) frequency

Description : Which of the answers listed below best completes the statement: The rate at which any part of a wave travels from one place to another determines the wave's: w) propagation velocity x) period y) amplitude z) frequency

Last Answer : ANSWER: W -- PROPAGATION VELOCITY

What is the optimum length for a half-wave aerial that requires to transmit and receive 1 MHz signals?

Description : What is the optimum length for a half-wave aerial that requires to transmit and receive 1 MHz signals?

Last Answer : An aerial length of 750 metres is required

How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Description : How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500

Last Answer : A. 1250

Which one of the following statements is correct regarding the GPS satellites? (A) The nominal altitude is about 20,200 km (B) The inclination of axis satellite is 55° (C) The satellite transmits two L band signals (L1 with 1575.42 MHz and L2 with 1276.6 MHz) (D) All of these

Description : Which one of the following statements is correct regarding the GPS satellites? (A) The nominal altitude is about 20,200 km (B) The inclination of axis satellite is 55° (C) The satellite transmits two L band signals (L1 with 1575.42 MHz and L2 with 1276.6 MHz) (D) All of these

Last Answer : Answer: Option D

When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Description : When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Last Answer : a. Transmit the message twice

When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Description : When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Last Answer : a. Transmit the message twice