Description : Which frequency band is the standard AM radio broadcast? A. HF B. UHF C. MF D. VHF
Last Answer : C. MF
Description : The frequency band of the ILS glidepath is: a. UHF b. VHF c. SHF d. VLF
Last Answer : a. UHF
Description : In what range of frequencies are most omnidirectional horizontally polarized antennas used? A. VHF, UHF B. VLF, LF C. SH, EHF D. MF, HF
Last Answer : A. VHF, UHF
Description : Which band does channel 14 of the television channel belong? A. High VHF band B. EHF band C. UHF band D. Low VHF band
Last Answer : C. UHF band
Description : Channel 7 of the regular television channel belongs to which band? A. Low VHF band B. High VHF band C. Low UHF band D. High UHF band
Last Answer : B. High VHF band
Description : TV channels 2, 4 and 5 are known as ________. A. Mid band UHF B. Low band UHF C. High band VHF D. Low band VHF
Last Answer : D. Low band VHF
Description : Troposheric scatter uses the frequencies in the ________ band. A. VLF B. UHF C. VHF D. UF
Last Answer : B. UHF
Description : Where does the AM broadcast band located in the spectrum band? A. HF band B. VHF band C. LF band D. MF band
Last Answer : D. MF band
Description : What is the metric subdivision of VHF band? A. Metric B. Millimetric C. Decimetric D. Centimetric
Last Answer : A. Metric
Description : Tropospheric scatteris usedwith frequenciesinthe followingrange: a. HF b. VHF c. UHF d. VLF
Last Answer : c. UHF
Description : Which frequency band is a wavelength of 1200m? a. UHF b. LF c. HF d. MF
Last Answer : b. LF
Description : In what frequency band is the ATIS normally broadcasted? a. LF b. HF c. ADF d. VHF
Last Answer : d. VHF
Description : What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz
Last Answer : ANSWER: Y -- 300 to 3,000 MEGA HERTZ
Description : Where is the noise generated that primarily determines the signal-to-noise ratio in a VHF (150MHz) marine-band receiver? A. Man-made noise B. In the atmosphere C. In the receiver front end D. In the ionosphere
Last Answer : C. In the receiver front end
Description : What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna
Last Answer : C. Local oscillator, mixer and RF amplifier
Description : Where is the noise generated that primarily determines the signal-to-noise ratio in a VHF (150 MHz) marine-band receiver? A. In the ionosphere B. In the receiver rear end C. In the receiver front end D. In the atmosphere
Description : What range of frequencies are usually referred to as the UHF Band? w) 3 to 30 Megahertz x) 30 to 300 Megahertz y) 300 to 3,000 Megahertz z) 30,000 to 300,000 Megahertz
Last Answer : ANSWER: Y -- 300 TO 3,000 MEGAHERTZ
Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave
Last Answer : D. A frequency modulated continuous wave
Description : What connector is popular in attaching test instruments like oscilloscopes, frequency counters, spectrum analyzers, etc? A. UHF connector B. PL-259 C. BNC D. SMA
Last Answer : C. BNC
Description : Assuming a UHF frequency range of 405.0125 MHz to 405.0875 MHz at 25 kHz channeling plan, how many channels can you produce? A. 2.5 ch. B. 2 ch. C. 4 ch. D. 3 ch.
Last Answer : D. 3 ch.
Description : What is the frequency range of an aircraft’s Very High Frequency (VHF) communications? A. 118.000 MHz to 136.975 MHz (worldwide up to 151.975 MHz) B. 108.000 MHz to 117.95 MHz C. 329.15 MHz to 335.00 MHz D. 2.0000 MHz to 29.999 MHz
Last Answer : A. 118.000 MHz to 136.975 MHz (worldwide up to 151.975 MHz)
Description : What is required for navigation in IMC? a. Radio equipment and equipment for guidance until visual point b. Anti-icing equipment c. A serviceable weather radar d. One VHF box and one HF box
Last Answer : a. Radio equipment and equipment for guidance until visual point
Description : Indicate the false statement. A. HF mixer are generally noisier than HF amplifiers. B. Impulse noise voltage is dependent on bandwidth C. Thermal noise is independent of the frequency at which is measured. D. Industrial noise is usually of the impulse type.
Last Answer : B. Impulse noise voltage is dependent on bandwidth
Description : Highest frequency that can be used for skywave HF communications between two given points on earth. A. Gyro frequency B. Maximum usable frequency C. Critical frequency D. Virtual frequency
Last Answer : B. Maximum usable frequency
Description : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz
Last Answer : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz
Description : Which of the following coaxial cable connectors is called the UHF connector? A. PL-259 B. BNC C. N-type connector D. F connector
Last Answer : A. PL-259
Description : When was the UHF channel (14-83) of television were added? A. 1852 B. 1904 C. 1947 D. 1952
Last Answer : D. 1952
Description : What propagation condition is usually indicated when a VHF signal is received from a station over 500 miles away? A. D-layer absorption B. Faraday rotation C. Tropospheric ducting D. Moonbounce
Last Answer : C. Tropospheric ducting
Description : Refers to one of the front end circuit of a VHF TV superheterodyne receiver which is usually a separate circuit coupled to the mixer. A. Antenna feed B. AGC C. RF amplifier D. Local oscillator
Last Answer : D. Local oscillator
Description : What propagation condition is usually indicated when a VHF signal is received from a station over 5000 miles away? A. Moonbounce B. D-layer absorption C. Tropospheric ducting D. Faraday rotation
Description : At what distance is VHF propagation normally limited? A. Around 500 miles B. Around 1500 miles C. Around 2000 miles D. Around 1000 miles
Last Answer : A. Around 500 miles
Description : Band of light waves, that are too short to be seen by human eye. A. Visible B. Infrared C. Ultraviolet D. Amber
Last Answer : C. Ultraviolet
Description : One of the following is very useful as a multiband HF receiving antenna. A. Parabolic antenna B. Elementary doublet C. Log-periodic D. Square loop
Last Answer : C. Log-periodic
Description : The antenna efficiency of an HF grounded vertical antenna can be made comparable to that of a half-wave antenna A. By installing a good ground radial system B. By isolating the coax shield from ground C. By shortening the vertical D. By lengthening the vertical
Last Answer : A. By installing a good ground radial system
Description : What is the usual electrical length of a driven element in an HF beam antenna? A. ¼ wavelength B. ¾ wavelength C. ½ wavelength D. 1 wavelength
Last Answer : C. ½ wavelength
Description : The advantage of using top loading in a shortened HF vertical antenna is A. lower quality factor B. greater structural strength C. higher losses D. improved radiation efficiency
Last Answer : D. improved radiation efficiency
Description : What is the channel spacing for MF-HF voice frequencies? A. 2.8 kHz B. 500 Hz C. 3.5 kHz D. 3 kHz
Last Answer : D. 3 kHz
Description : How can the antenna efficiency of an HF grounded vertical antenna be made comparable to that of a half-wave antenna? A. By lengthening the vertical B. By installing a good ground radial system C. By shortening the vertical D. By isolating the coax shield from ground
Last Answer : B. By installing a good ground radial system
Last Answer : UHF band is given by 300 MHz to 3000 MHz.
Description : In modulation technique, which of the following is referred to audible pitch? A. Width B. Frequency C. Harmonic D. Amplitude
Last Answer : B. Frequency
Description : This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation
Last Answer : C. Dynamic instability
Description : Referred to as an average power from the radio transmitter supplied to the antenna transmission line taken during one radio frequency cycle under no modulation. A. Carrier power B. Rated power C. Peak envelop power D. Mean power
Last Answer : A. Carrier power
Description : The reverberation time of a 184.2 cubic meters broadcast studio is 0.84 sec. Find the absorption effect of the materials used in metric sabines. A. 35.3 B. 10.96 C. 379.8 D. 109.6
Last Answer : A. 35.3
Description : ________ generates light beam at a specific visible frequency. A. Glass fiber B. Infrared C. Light waves D. Laser
Last Answer : D. Laser
Description : Most satellites operate in which frequency band? A. 30 to 300 MHz B. 300 MHz to 3 GHz C. 3 GHz to 30 GHz D. Above 300 GHz
Last Answer : C. 3 GHz to 30 GHz
Description : A method of multiple accessing where a given RF channel bandwidth is divided inot smaller frequency band. A. CDMA B. ANIK-D C. TDMA D. FDMA
Last Answer : D. FDMA
Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz
Last Answer : D. 500 MHz
Description : The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz
Last Answer : B. 14/11 GHz