Draw sketch of Bourdon tube pressure gauge and state its advantages.

Draw sketch of Bourdon tube pressure gauge and state its advantages.
by

1 Answer

Answer :

image

Advantages: 

• These give more accurate results.

• Bourdon tube cost low.

• Bourdon tube are simple in construction.

• They can be modified to give electrical outputs.

• They are safe even for high pressure measurement.

• Accuracy is high especially at high pressures.


by

Related questions

Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Description : Explain Bernoulli’s theorem with neat sketch. State its two important assumptions.

Last Answer : This theorem states that whenever there is continuous flow of liquid the total energy at every section remains same provided that there is no any addition or loss of energy.  Let us consider ... incompressible. 4. Velocity is uniform over the cross section. 5. The flow is irrotational.

Explain Construction and working of Francis Turbine with neat sketch.

Description : Explain Construction and working of Francis Turbine with neat sketch.

Last Answer : The main parts of the Francis turbine are: 1) Penstock: It is the large pipe which conveys water from the upstream of the reservoir to the turbine runner. 2) Spiral casing: It is a closed passage ... After doing the work the water is discharge to the trail race through the draft tubes.

Derive equation for discharge through orifice meter with the help of neat sketch.

Description : Derive equation for discharge through orifice meter with the help of neat sketch.

Last Answer : Orifice Meter or orifice Plate: It is a device used for measuring the rate of flow of a fluid through a pipe. It is Cheaper device as compared to venturimeter. It also works on the same ... a distance of about half the diameter of the orifice on the downstream side from the orifice plate. 

List various minor losses in fluid flow. Explain any one type with sketch and formula.

Description : List various minor losses in fluid flow. Explain any one type with sketch and formula.

Last Answer : List various minor losses a) Sudden expansion of pipe b) Sudden contraction of pipe c) Pipe fittings d) Bend in pipe e) Loss of head at Entry. f) Loss of ... The head loss resulting from pipe expansion may be greatly reduced by introducing gradual pipe transition known as diffuser. 

Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Description : Explain the Need of draft tube in reaction turbine .state the types of draft tube used in it

Last Answer : Draft tube is a pipe of gradually increasing diameter which connects the exit of runner of turbine to tail race. In case of reaction turbine , one part of available head is converted into K.E before ... . iv. Elbow draft tube with circular cross section at inlet and rectangular at outlet.

Draw and explain performance and operating characteristics curves of a Pelton turbine

Description : Draw and explain performance and operating characteristics curves of a Pelton turbine 

Last Answer : The followings are the important characteristic curves of a turbine : Main Characteristic Curves or Constant Head Curve. ... The speed of the turbine is varied by changing load on the turbine. For each value ... through the turbine as the load varies. Head may or may not kept constant.

Draw the layout of hydroelectric power plant and classify the turbines used in it.

Description : Draw the layout of hydroelectric power plant and classify the turbines used in it.

Last Answer : Layout of hydroelectric power plant: Classification of the hydraulic turbines: According to the type of energy available at inlet to the turbine 1)impulse turbine and 2) Reaction turbine ... speed of the turbine 1)low specific speed 2)medium specific speed 3)High specific speed

Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Description : Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

Last Answer : Draw indicator diagram for reciprocating pump showing the effect of accelerating head and frictional head.

The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Description : The pressure in the tyres of the four wheeler was measured as 33. State the unit of pressure in this case. Name the device use to measure this pressure.

Last Answer : The unit of pressure 33 in this case is PSI (Pound per square Inch).  The name of device used to measure is Bourdon Tube Pressure Gauge

State any four faults in centrifugal pump and their remedies

Description : State any four faults in centrifugal pump and their remedies

Last Answer : Sr.No Fault remedies 1 Pump fails to start pumping Reprime the pump , Clean the impeller Reduce suction lift , Increase the speed 2 Pump stops working ... Reduce the speed Correct the direction of rotation of impeller Reduce the discharge , Repair affected parts

Explain water hammer phenomenon and state the remedies measures to avoid it.

Description : Explain water hammer phenomenon and state the remedies measures to avoid it.

Last Answer : Water hammer phenomenon: commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. Water hammer (or hydraulic shock) is the momentary increase in ... . caused by the moving water. 7) Use high strength pipes. 8) Close the valve slowly.

State the difference between Static head & Manometric head in centrifugal pump.

Description : State the difference between Static head & Manometric head in centrifugal pump.

Last Answer : Static head: The sum of suction head & delivery head is known as static head.  Manometric head: It is the total head that pump is required to develop. This include all losses. This is equal to difference between pressure head at inlet & outlet of pump.

State the need of surge tank in hydroelectric power plant.

Description : State the need of surge tank in hydroelectric power plant.

Last Answer : It is the tank provided in the path of penstock to avoid pulsating discharge at inlet of turbines. To reduce effect of water hammer surge tanks are provided. During flow of ... reservoir to turbine through penstock pressure surges are created to compensate these surges surge tank is provided.

Discuss the factors considered for selection of pump

Description : Discuss the factors considered for selection of pump

Last Answer : 1) Pressure: Pump is ued to pressurize the fluid in system according to need of pressure we can select pump as below 2) Speed of pump: if the speed of pump is increased beyond its ... according to application we can choose it by economical aspect cost of pump & its spares should be less.

Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Description : Compare i) Steady and uniform flow ii) Laminar and turbulent flow

Last Answer : Steady flow:- The flow is said to be steady when the flow characteristics, such as velocity, pressure, density and temperature do not change with time. Water flowing through a tap at a constant rate is an ... called as turbulent flow. e.g. The flow of river at the time of flood is turbulent flow.

Write Chezy’s equation for frictional losses and list all the terms involved in it.

Description : Write Chezy’s equation for frictional losses and list all the terms involved in it.

Last Answer : Where; V = velocity of water in pipe,  m = hydraulic mean depth =A/P = d/4  I = loss of head per unit length,  C = Chezy’s constant

Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Description : Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Last Answer : Show the difference between hydraulic gradient line & total energy line with the help of suitable diagram.

Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Description : Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Last Answer : Here it is not possible to find out viscosity

Pressure of the order of 10" torr can be measured by (A) Bourdon tube (B) Pirani Gauge (C) Micro-manometer (D) Lonisation gauge

Description : Pressure of the order of 10" torr can be measured by (A) Bourdon tube (B) Pirani Gauge (C) Micro-manometer (D) Lonisation gauge

Last Answer : Answer: Option D

State the advantages and disadvantages of Bourdon type pressure gauge.

Description : State the advantages and disadvantages of Bourdon type pressure gauge.

Last Answer : Bourdon tube: Advantages: 1) Low cost 2) Simple construction 3) Wide pressure range 4) High accuracy in relation with low cost Disadvantages: 1) Low spring gradient 2) Susceptible to shock and vibration 3) Susceptible to hysteresis

Sketch and describe pressure measurement system for 800 mm pressure, that contain Bourdon tube and LVDT.

Description : Sketch and describe pressure measurement system for 800 mm pressure, that contain Bourdon tube and LVDT.

Last Answer : Diagram: Explanation: The pressure measurement using bourdon tube and LVDT is shown in above figure. In this the, the bourdon tube act as primary transducer and LVDT which follows ... This set up is used for measurement of pressure which is converted into electrical signal by LVDT.

Draw Bourdon tube with LVDT setup for pressure measurement.

Description : Draw Bourdon tube with LVDT setup for pressure measurement.

Last Answer : Bourdon tube with LVDT setup for pressure measurement.

What is something that is automated that shouldn't be? What is something that isn't that should be?

Description : What is something that is automated that shouldn't be? What is something that isn't that should be?

Last Answer : OMG…those DAMN automated answering devises that companies have. Push this…push that. Makes me boiling mad. Put a human being on the end of that phone!!! Make it that we can talk to a person & give people jobs.

How to Replace Automatic Transmission Fluid

Description : How to Replace Automatic Transmission Fluid

Last Answer : How to Replace Automatic Transmission Fluid Many cars run on automatic transmission because it is easy to use in city driving. Just because gear changes are automatic, however, maintenance should still be ... , you can easily replace ATF on your automatic transmission car and add years to its life.

How to Refill Brake Fluid

Description : How to Refill Brake Fluid

Last Answer : How to Refill Brake Fluid Driving with low brake fluid is not just bad for your car and damaging for its brakes, but it can be dangerous for you as well. Monitoring your brake fluid is relatively ... a secure place where children won't get it, as it is potentially harmful and dangerous to them.

How to Check Your Windshield Washer Fluid Level

Description : How to Check Your Windshield Washer Fluid Level

Last Answer : How to Check Your Windshield Washer Fluid Level Rain, sleet, or snow will not keep you from driving your car on a daily basis. Dust, pollution, and smoke will not keep you from driving ... mixed with the water to prevent the wiper blades from hardening and causing streaks on the windshield glass.

How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Description : How can I get my silly little 1990 Ford Ranger to pass it's Gas Evap test?

Last Answer : I meant April. not August…

Best Motorcycle for a novice lady biker?

Description : Best Motorcycle for a novice lady biker?

Last Answer : Yamaha SX 650. It’s light,powerful and simple. Exactly how I like my men XD Have fun!

Is there anything I can do to fix my car myself?

Description : Is there anything I can do to fix my car myself?

Last Answer : What year, make, model? What’s normal mileage you’ve seen? What’re you seeing now? How many miles are on the odometer? When’s the last time you had some kind of scheduled maintenance done?

What is a crank shaft?

Description : What is a crank shaft?

Last Answer : http://en.wikipedia.org/wiki/Crank_shaft

What is a cam shaft?

Description : What is a cam shaft?

Last Answer : http://en.wikipedia.org/wiki/Cam_shaft

What is mechanics?

Description : What is mechanics?

Last Answer : http://en.wikipedia.org/wiki/Mechanics

How To Make Mechanics Hand Cleanser

Description : How To Make Mechanics Hand Cleanser

Last Answer : Grind up a bar or two of your soap 1 c. borax 1-2 t. pure turpentine 1 t. sweet orange essential oil 1 c. ground soap With very clean hands, work the turpentine and essential oil into the borax ... black on the outside. Don't forget to put a nail brush and pumice stone out with the hand cleanser.

Explain the mechanics of chip formation with neat diagram.

Description : Explain the mechanics of chip formation with neat diagram. 

Last Answer : Mechanics of chip formation: The basic mechanics of forming a chip are the same regardless of the base material. As the cutting tool engages the workpiece, the material directly ahead of ... action of slipping or shearing, which takes place within the crystals and between adjacent crystals.

Draw constructional details of C-types Bourdon tube and explain its working

Description : Draw constructional details of C-types Bourdon tube and explain its working

Last Answer : Constructional details of C-types Bourdon tube :   Explanation:- 1. The Bourdon tubes are made out of an elliptically sectioned flat tube bent in such a way as to produce the above ... pressure. 8. The materials used for Bourdon tubes are brass, phosphor bronze, beryllium copper, and steel 

Draw the constructional detail of C type bourdon tube and explain its working.

Description : Draw the constructional detail of C type bourdon tube and explain its working. 

Last Answer : Explanation : The C-shaped Bourdon tube has a hollow, elliptical cross section. It is closed at one end and is connected to the fluid pressure at the other end. When pressure is applied, ... the maximum operating pressure of the system or portion of the system in which the gauge is installed. 

Draw and describe construction and working of Bourdon tube.

Description : Draw and describe construction and working of Bourdon tube.

Last Answer : Construction and working : C type bourdon tube is made up of an elliptically flattened tube bent in such a way as to produce the C' shape as shown in the figure. One end (free ... displacement can be indication of applied pressure. Accuracy of this element is higher than C' type element.

What pressure measuring device consists of a coiled hollow tube that tends to straighten out when the tube is subjected to an internal pressure?  A. Aneroid  B. Manometer  C. Bourdon pressure gage  D. Barometer

Description : What pressure measuring device consists of a coiled hollow tube that tends to straighten out when the tube is subjected to an internal pressure?  A. Aneroid  B. Manometer  C. Bourdon pressure gage  D. Barometer

Last Answer : Bourdon pressure gage

Which of the following is NOT an instrument used to measure pressure?  A. Bourdon tube  B. Pitot tube  C. Aneroid  D. Manometer

Description : Which of the following is NOT an instrument used to measure pressure?  A. Bourdon tube  B. Pitot tube  C. Aneroid  D. Manometer

Last Answer : Pitot tube

Explain the sketches , the working principle of Bourdon tube.

Description : Explain the sketches , the working principle of Bourdon tube.

Last Answer : Working principle of Bourdon tube:- C type bourdon tube is made up of an elliptically flattened tube bent in such a way as to produce the C shape as shown in the fig. One ... terms of pressure. The relationship between the displacement of the free end and the applied pressure is nonlinear.

Give comparison of Bourdon tube and Diaphragm.

Description : Give comparison of Bourdon tube and Diaphragm.

Last Answer : Bourdon tube Diaphragm. Gear drive connects dial reading No gears inside the diaphragm pressure gauge Increased gap between gear and arm affect accuracy  Shock resistant and good ... time and money Large range of pressure measurement Small range of pressure measurement

State the working principle of Bellows pressure gauge with neat sketch.

Description : State the working principle of Bellows pressure gauge with neat sketch.

Last Answer : Bellows pressure gauge: Diagram: Principle: Bellows element is the elastic element which gets deflected at the free end when pressure is applied through fixed end. This free end deflection can be taken as the measure of pressure inside it.

Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Description : Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Last Answer : This type of tyre does not need separate tube, instead the air under pressure is filled in the tyre for which purpose a non return valve is fitted to the rim. The tyre is directly mounted on the ... safety:- in case of puncture air defuses slowly which provide safety to driver as well as other.

Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Description : Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Last Answer : Diagram: Figure: DC signal conditioning circuit for pressure measurement using strain gauge Where, Rg= strain gauge resistance. Explanation: In order to measure strain with ... millivolts output per volt input. The Wheatstone circuit is also well suited for temperature compensation.

Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Description : Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Last Answer : Loop antenna:-The single turn coil carrying RF current through it having length less than the wavelength.   Advantages:- 1. highly directive 2. Small size Applications:- 1. For direction finding 2. In portable receivers 3. In navigation 

Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Description : Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Last Answer : Diagram:  Explanation: Electromagnetic flow meters works based on Faraday's Law of Electromagnetic Induction. According to this principle, when a conductive medium passes through a magnetic ... water, chilled water. Used for flow measurement of Corrosive liquids, slurries and pastes.

__________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge(C) Pitot tube(D) Orificemeter

Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter

Last Answer : (C) Pitot tube

Pick out the wrong statement: (A) The vacuum pressure is always the negative gauge pressure (B) The pressure of the liquid measured by a piezometer tube is the gauge pressure (C) Manometric liquid should have high surface tension (D) The point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

Description : Pick out the wrong statement: (A) The vacuum pressure is always the negative gauge pressure (B) The pressure of the liquid measured by a piezometer tube is the gauge pressure (C) Manometric ... point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

Last Answer : (D) The point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

The pressure of a liquid measured with the help of a Piezometer tube is (A) Vacuum pressure (B) Gauge pressure (C) Absolute pressure (D) Atmospheric pressure

Description : The pressure of a liquid measured with the help of a Piezometer tube is (A) Vacuum pressure (B) Gauge pressure (C) Absolute pressure (D) Atmospheric pressure

Last Answer : Answer: Option B

Draw and explain a pressure gauge ? What is the used of a Hair spring ?

Description : Draw and explain a pressure gauge ? What is the used of a Hair spring ?

Last Answer : The parts of a pressure gauge are : ١. 'C' type Bourdon tube. ٢. Connecting link. ٣. Sector gear. ٤. Pinion gear. ٥. Hair Spring. ٦. Pointer. ٧. Dial. Uses of Hair Spring : Hair ... two purposes namely To avoid backlash error (eliminate any play into linkages). It serves as a controlling torque.