Sketch and describe pressure measurement system for 800 mm pressure, that contain Bourdon tube and LVDT.

Sketch and describe pressure measurement system for 800 mm pressure, that contain Bourdon tube and LVDT.
by

1 Answer

Answer :

Diagram:

image

Explanation:

The pressure measurement using bourdon tube and LVDT is shown in above figure.

In this the, the bourdon tube act as primary transducer and LVDT which follows the output of bourdon tube act as a secondary transducer.

The bourdon tube senses the pressure and converts it into a displacement.

The free end of bourdon tube shows this displacement. A cord is used to connect the free end of bourdon tube to the core of LVDT as shown in figure.

When the free end shows the displacement, the core of LVDT also moves.

This movement of core is proportional to the displacement of free end, which is proportional to the applied pressure.

The LVDT gives analogues output which is a conversion of displacement into respective emf.

This set up is used for measurement of pressure which is converted into electrical signal by LVDT.

by

Related questions

Sketch and describe the working principle of LVDT.

Description : Sketch and describe the working principle of LVDT.

Last Answer : Diagram Explaintion: LVDT is the example of inductive transducer, in LVDT any physical displacement of the core cause the voltage of any secondary winding to increase while simultaneously reducing the ... winding and core varies the coupling between it and two secondary windings. .:E0=E1-E2

Draw Bourdon tube with LVDT setup for pressure measurement.

Description : Draw Bourdon tube with LVDT setup for pressure measurement.

Last Answer : Bourdon tube with LVDT setup for pressure measurement.

Explain the sketches , the working principle of Bourdon tube.

Description : Explain the sketches , the working principle of Bourdon tube.

Last Answer : Working principle of Bourdon tube:- C type bourdon tube is made up of an elliptically flattened tube bent in such a way as to produce the C shape as shown in the fig. One ... terms of pressure. The relationship between the displacement of the free end and the applied pressure is nonlinear.

Draw and describe the constructional diagram of LVDT.

Description : Draw and describe the constructional diagram of LVDT.

Last Answer : Construction of LVDT: A differential transducer consists of a primary winding and two secondary winding. The windings are arranged concentrically and next to each other. They are wound  over a ... winding and core varies the coupling between it and two secondary windings. E0=E1-E2

Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Description : Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Last Answer : Diagram: Figure: DC signal conditioning circuit for pressure measurement using strain gauge Where, Rg= strain gauge resistance. Explanation: In order to measure strain with ... millivolts output per volt input. The Wheatstone circuit is also well suited for temperature compensation.

Sketch the block diagram of function generator & describe the circuit of sine wave generation.

Description : Sketch the block diagram of function generator & describe the circuit of sine wave generation.

Last Answer : Block Diagram Explanation‐ For generation of sinewave , out of the three knobs‐ sine, square and triangular , the sine knob is pressed, output is adjusted for required frequency and amplitude using frequency and amplitude

Describe working principle of radiation level measurement with neat diagram.

Description : Describe working principle of radiation level measurement with neat diagram.

Last Answer : Radiation type level measurement. Is non contact type detector which is used where electrical method would not survive. working principle 1.It consist of gamma ray source holder on one side ... 7. Thus, when liquid level rises, the amount of radiation received is reduced and vice versa.

Draw sketch of Bourdon tube pressure gauge and state its advantages.

Description : Draw sketch of Bourdon tube pressure gauge and state its advantages.

Last Answer : Advantages:  • These give more accurate results. • Bourdon tube cost low. • Bourdon tube are simple in construction. • They can be modified to give electrical outputs. • They are safe even for high pressure measurement. • Accuracy is high especially at high pressures.

Sketch Block diagram of vertical deflection system used in CRO.

Description : Sketch Block diagram of vertical deflection system used in CRO.

Last Answer : Block diagram of vertical deflection system used in CRO

Sketch block diagram of pattern generator and draw any four test patterns

Description : Sketch block diagram of pattern generator and draw any four test patterns

Last Answer :  Block Diagram of Pattern Generator: Test patterns of Pattern Generator:

Sketch the circuit of basic DC ammeter , derive equation for shunt resistance.

Description : Sketch the circuit of basic DC ammeter , derive equation for shunt resistance.

Last Answer : Derivation The basic movement of dc ammeter circuit consists of D' Arsonval galvanometer. When large current is to be measured then some extra modification is required. For measurement of large current by using ... same. Vsh =Vm m IshRsh=ImRm Rsh=ImRm/Ish Rsh=ImRm/(I-Im) 

Sketch block diagram of single trace CRO. State function of delay line.

Description : Sketch block diagram of single trace CRO. State function of delay line.

Last Answer : Function of Delay line: This block is used to delay the signal for a period of time in the vertical section of CRT. The input signal is not applied directly to the vertical plates because the part ... when the delay time is not used. Therefore, the input signal is delayed by a period of time.

Explain the electro-magnetic flow meter with neat sketch and write it’s application.

Description : Explain the electro-magnetic flow meter with neat sketch and write it’s application. 

Last Answer : Electromagnetic flow meter: Principle of Operation: 1. The operation of an Electro-magnetic flow meter is based upon Faraday's Law, which states that the voltage induced across any conductor as it ... rates. It can be also used for measurement of flow rate of slurries, greasy materials.

Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Description : Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Last Answer : Diagram:  Explanation: Electromagnetic flow meters works based on Faraday's Law of Electromagnetic Induction. According to this principle, when a conductive medium passes through a magnetic ... water, chilled water. Used for flow measurement of Corrosive liquids, slurries and pastes.

Explain measurement of phase and frequency using Lissajous pattern. Write the formula for each one.

Description : Explain measurement of phase and frequency using Lissajous pattern. Write the formula for each one.

Last Answer : Phase measurement of Lissajous pattern: The phase measurement can be done by using Lissajous figures. The CRO is set to operate in the X- Y mode, then the display obtained on the screen of a ... or sub- multiple of the unknown frequency.  The Lissajous pattern appears stationary.     

Explain the measurement of voltage and frequency using CRO.

Description : Explain the measurement of voltage and frequency using CRO.

Last Answer : Voltage Measurement: CRO displays the voltage signal as a function of time on its screen. The amplitude of that voltage signal is constant, but we can vary the number of divisions that cover the voltage ... /division nv is the number of divisions that cover the signal in vertical direction.

Define Lissajous pattern. Explain how Lissajous pattern is useful for frequency and phase measurement.

Description : Define Lissajous pattern. Explain how Lissajous pattern is useful for frequency and phase measurement.

Last Answer : Lissajous Pattern : The CRO is set to operate in the X- Y mode, when two sine waves of the same frequency are applied to the CRO (One vertical and one horizontal deflection plates) then the display obtained on ... 1. Lissajous pattern for ratio 3:1    2. Lissajous pattern for ratio 3:2  

Explain how CRO is used for measurement of frequency & amplitude with suitable diagram

Description : Explain how CRO is used for measurement of frequency & amplitude with suitable diagram

Last Answer : Voltage measurement/Amplitude: The most direct voltage measurement that can be made with the help of oscilloscope is the peak to peak value. The RMS value can be calculated from peak to peak value. ... is the time between two identical points of successive cycle of the waveform.

Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Description : Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Last Answer : CRO DSO Directly reads analog voltage and displays it on screen. It reads the analog voltage and converts it into digital form before being displayed on the screen. ... algorithms available and ported on microprocessor which can operate on stored samples of input voltage.

State need of level measurement.

Description : State need of level measurement.

Last Answer : In almost all industries, vast quantities of liquid such as water solvents, chemicals etc. are used in number of processes. It is widely employed to monitor as well as measure ... and therefore its measurement becomes important in a variety of processes encountered in modern manufacturing plants.

Define the term ‘Measurement’.

Description : Define the term ‘Measurement’.

Last Answer : Measurement is the result or act of a quantitative comparison between a predetermined standard and an unknown magnitude. Or Measurement is the result of an opinion formed by one or more observers about the relative size or intensity of some physical quantity.

Draw and describe horizontal deflection system in CRO

Description : Draw and describe horizontal deflection system in CRO 

Last Answer : Block Diagram: Explanation: Input from vertical amplifier is given to Horizontal system. Trigger circuit: a. A trigger circuit is used to convert the incoming signal into trigger ... : Horizontal amplifier amplifies the signal & passes the signal to horizontal plates of CRT. 

Draw and describe general Data acquisition system .

Description : Draw and describe general Data acquisition system . 

Last Answer : Data acquisition is the process of sampling signals that measure real world physical conditions and converting the resulting samples into digital numeric values that can be manipulated ... are usually controlled by software programs developed using various general purpose programming languages

Draw and describe construction and working of Bourdon tube.

Description : Draw and describe construction and working of Bourdon tube.

Last Answer : Construction and working : C type bourdon tube is made up of an elliptically flattened tube bent in such a way as to produce the C' shape as shown in the figure. One end (free ... displacement can be indication of applied pressure. Accuracy of this element is higher than C' type element.

Draw block diagram of digital frequency meter in time mode and describe its operation.

Description : Draw block diagram of digital frequency meter in time mode and describe its operation.

Last Answer : OR Operation: The input signal is amplified and converted to a square wave by a Schmitt Trigger circuit. In this diagram the square wave is differentiated and clipped to ... thereby closing it. The decimal counter and display unit output correspond to the number of input pulses. 

State and describe different triggering available in CRO

Description : State and describe different triggering available in CRO

Last Answer : A trigger is an external signal or input signal condition that initiates one or more instrument functions. Trigger settings include digital edges, software functions, and analog levels. This tutorial ... the external trigger input. The following figure shows an entering window trigger.  

Draw the basic block diagram of single trace CRO and describe the function of delay line.

Description : Draw the basic block diagram of single trace CRO and describe the function of delay line.

Last Answer : Function of Delay line: This block is used to delay the signal for a period of time in the vertical section of CRT. The input signal is not applied directly to the vertical plates because the part ... when the delay time is not used. Therefore, the input signal is delayed by a period of time. 

How are instruments classified? Describe the different types.

Description : How are instruments classified? Describe the different types.

Last Answer : The instruments are classified depending upon: a. Principle of operation: E.g.: Magnetic meter, induction meter. b. Permissible percentage error c. Depending upon application: E. ... measured by observing the output indicated by instrument. Example: Voltmeter, Thermometer, pressure guage.

Describe block diagram of spectrum analyzer and explain its working

Description : Describe block diagram of spectrum analyzer and explain its working

Last Answer : Fig: Block Diagram of Spectrum analyzer. 1. Spectrum analyzer consists of voltage tune oscillator, mixer, IF amplifier, detector, video amplifier, sweep generator and CRT. 2. The input ... on the screen. 8. In this type the signal are broken down into their individual frequency component.

Describe following terms w.r.t. Analog voltmeter : (i) Sensitivity (ii) Loading effect

Description : Describe following terms w.r.t. Analog voltmeter : (i) Sensitivity (ii) Loading effect

Last Answer : Sensitivity: The sensitivity of a voltmeter is just its capability to detect voltage, usually meaning smaller and smaller voltages. When selecting a meter for a certain voltage measurement, it is ... called loading effect of the voltmeters. It is mainly caused due to low sensitivity instruments.

Describe working of pulse generator with proper block diagram

Description : Describe working of pulse generator with proper block diagram 

Last Answer : Explanation- Figure shows the block diagram of pulse generator. The circuit consists of two current sources, a ramp capacitor and schematic trigger circuit as well as current switching ... be synchronized to an external signal by triggering the circuit by an external synchronization pulse.

Draw the circuit diagram of multi range AC voltmeter and describe its working

Description : Draw the circuit diagram of multi range AC voltmeter and describe its working

Last Answer : The above circuit looks like a multi range AC voltmeter. We know that, we will get AC voltmeter just by placing rectifier in series (cascade) with DC voltmeter. The above circuit was created ... any two points of an electric circuit, by connecting the switch, S to the desired voltage range.

Describe working of A.C. voltmeter using half wave rectifier with neat circuit diagram.

Description : Describe working of A.C. voltmeter using half wave rectifier with neat circuit diagram. 

Last Answer : AC Voltmeter using Half Wave Rectifier : The a.c. voltmeter using half wave rectifier is achieved by introducing a diode in a basic d.c. voltmeter. This is shown in the Fig. 1. The diode D ... can be obtained for a.c. voltmeter as, Where Idc is the full scale deflection current..

Describe the circuit diagram of AC signal conditioning.

Description : Describe the circuit diagram of AC signal conditioning. 

Last Answer : The block diagram of a.c. signal conditioning system:-  Working:- This is carrier type a.c. signal conditioning system. The transducer used is variable resistance or variable ... signal conditioning includes the circuits like sample and hold, multiplexers ,analog to digital converters etc.

Describe the need for calibration.

Description : Describe the need for calibration.

Last Answer : Calibration is defined as the comparison of measured value with standard. Why required? The accuracy of all measuring devices degrade over time. This is typically caused by normal wear ... the manufacturer. After any mechanical or electrical shock. Periodically (annually, quarterly, monthly)

Describe the block diagram of function generator.

Description : Describe the block diagram of function generator. 

Last Answer : Block diagram of function Generator Principle of operation of function generator: Function generator operates to produce different waveforms such as sine, square, triangular of adjustable ... whose frequency is determined by the magnitude of current supplied by constant current sources.

Draw PMMC meter movement and describe it.

Description : Draw PMMC meter movement and describe it.

Last Answer : Working principle of PMMC: 1. The working principle of PMMC is based on basic meter movement known as D'Arsonval principle stated as when current passes through the coil ... controlling torque becomes equal to deflecting torque then pointer attached with scale become stable at equilibrium. 

Pressure of the order of 10" torr can be measured by (A) Bourdon tube (B) Pirani Gauge (C) Micro-manometer (D) Lonisation gauge

Description : Pressure of the order of 10" torr can be measured by (A) Bourdon tube (B) Pirani Gauge (C) Micro-manometer (D) Lonisation gauge

Last Answer : Answer: Option D

What pressure measuring device consists of a coiled hollow tube that tends to straighten out when the tube is subjected to an internal pressure?  A. Aneroid  B. Manometer  C. Bourdon pressure gage  D. Barometer

Description : What pressure measuring device consists of a coiled hollow tube that tends to straighten out when the tube is subjected to an internal pressure?  A. Aneroid  B. Manometer  C. Bourdon pressure gage  D. Barometer

Last Answer : Bourdon pressure gage

Which of the following is NOT an instrument used to measure pressure?  A. Bourdon tube  B. Pitot tube  C. Aneroid  D. Manometer

Description : Which of the following is NOT an instrument used to measure pressure?  A. Bourdon tube  B. Pitot tube  C. Aneroid  D. Manometer

Last Answer : Pitot tube

Draw and explain the displacement measurement system using LVDT.

Description : Draw and explain the displacement measurement system using LVDT.

Last Answer : (Or)  LVDT has a single primary winding P and two secondary windings S1 and S2 wound on a cylindrical former. S1 and S2 have equal number of turns and are ... while simultaneously reducing the voltage in the other winding. Output voltage Vo measured is equivalent to the displacement.

Correction for capillary effect in manometers (used for pressure measurement) need not be applied, if diameter of the manometer tube is __________ mm. (A) < 4 (B) > 4 (C) > 12.5 (D) < 10

Description : Correction for capillary effect in manometers (used for pressure measurement) need not be applied, if diameter of the manometer tube is __________ mm. (A) < 4 (B) > 4 (C) > 12.5 (D) < 10

Last Answer : (C) > 12.5

LVDT used for displacement measurement is a/an __________ transducer. (A) Passive (B) Active (C) Capacitive (D) None of these

Description : LVDT used for displacement measurement is a/an __________ transducer. (A) Passive (B) Active (C) Capacitive (D) None of these

Last Answer : (A) Passive

Draw and explain block diagram of Horizontal deflection system.

Description : Draw and explain block diagram of Horizontal deflection system. 

Last Answer :  Trigger circuit: A trigger circuit is used to convert the incoming signal into trigger pulses, so that the input signal and the sweep frequency can be synchronized. The trigger circuit is ... before it is applied to the horizontal section. The block consists of a push- pull amplifier  

Define signal conditioning system.

Description : Define signal conditioning system.

Last Answer : Signal conditioning is the manipulation of a signal in a way that prepares it for the next stage of processing. Many applications involve environmental or structural measurement, such as temperature and vibration, from sensors.

Write objective of Data acquisition system.

Description : Write objective of Data acquisition system.

Last Answer : Objectives of Data Acquisition System: It must monitor the complete plant operation to maintain online optimum and safe operations. It must provide an effective human communication system and be able to identify problem ... data. It must be reliable, and not have a down time greater than 0.1%.

Write any two applications of Instrumentation System.

Description : Write any two applications of Instrumentation System.

Last Answer :  Instrumentation is used to measure many parameters (physical values). These parameters include: Pressure,either differential or static Flow Temperature Levels of liquids, etc. ... Inductance Capacitance Resistivity Chemical composition Chemical properties Position Vibration

Draw the block diagram of instrumentation system and explain function of each block.

Description : Draw the block diagram of instrumentation system and explain function of each block. 

Last Answer : Functions of each block: Primary sensing element: This first receives energy from the measured medium and produces an output depending on measured quantity. Variable conversion element: Converts ... indication of a pointer moving a scale or the recording of a pen Moving over chart.

Draw constructional details of C-types Bourdon tube and explain its working

Description : Draw constructional details of C-types Bourdon tube and explain its working

Last Answer : Constructional details of C-types Bourdon tube :   Explanation:- 1. The Bourdon tubes are made out of an elliptically sectioned flat tube bent in such a way as to produce the above ... pressure. 8. The materials used for Bourdon tubes are brass, phosphor bronze, beryllium copper, and steel 

Give comparison of Bourdon tube and Diaphragm.

Description : Give comparison of Bourdon tube and Diaphragm.

Last Answer : Bourdon tube Diaphragm. Gear drive connects dial reading No gears inside the diaphragm pressure gauge Increased gap between gear and arm affect accuracy  Shock resistant and good ... time and money Large range of pressure measurement Small range of pressure measurement