If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled

1 Answer

Answer :

Answer: A

Related questions

Description : Two steel balls are at a distance S from one another. As the mass of ONE of the balls is doubled, the gravitational force of attraction between them is: w) quartered x) halved y) doubled z) quadrupled

Last Answer : ANSWER: Y -- DOUBLED 

Description : If the resistance of a circuit is cut in half and the applied voltage is kept constant, the current flow will be _____________. A. doubled B. quadrupled C. unchanged D. cut in half

Last Answer : Answer: A

Description : When the current flow through a power transmission line is doubled, the power loss _____________. A. is halved B. is doubled C. is quadrupled D. remains the same

Last Answer : Answer: C

Description : The value of the resistor creating thermal noise is doubled. The noise power generated is therefore. A. halved B. quadrupled C. doubled D. unchanged

Last Answer : D. unchanged

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Description : A particle is moving in Simple Harmonic Motion in a simple pendulum with some period of oscillation. Now in order to double the period of oscillation a.The length of pendulum should be quadrupled b.The ... length of pendulum should be reduced to one fourth e.The mass of the bob should be doubled

Last Answer : a. The length of pendulum should be quadrupled

Description : The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Last Answer : ANSWER: Z -- QUADRUPLED

Description : A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, ... B. twice as much C. the same as the original resistance D. one-half of the original resistance

Last Answer : Answer: A

Description : When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold

Last Answer : Answer: C

Description : A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of ... wire C. the same as that of the original wire D. one-half that of the original wire

Last Answer : Answer: A

Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same

Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity 

Description : The existing resistance of a conductor is dependent upon its length, cross-sectional area, _____________. A. temperature and insulation B. material and insulation C. resistive coefficient and material D. material and temperature

Last Answer : Answer: D

Description : The resistance of a conductor varies _____________. A. directly as its length and inversely as its cross-sectional area B. inversely as its length and directly as its cross-sectional area C. directly ... as its cross-sectional area D. inversely as its length and inversely as its cross-sectional area

Last Answer : Answer: A

Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases

Last Answer : Answer: B

Description : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th

Last Answer : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area ... Omega` C. `1 Omega` D. `4 Omega`

Description : The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch

Last Answer : Answer: B

Description : When the current flow in a power transmission line is halved, the power loss _____________. A. is halved B. is doubled C. is divided by four D. remains the same

Last Answer : Answer: C

Description : In the spring mass system if the mass of the system is doubled with spring stiffness halved, the natural frequency of longitudinal vibration A) Remained unchanged B) Is doubled C) Is halved D) Is quadruped

Last Answer : C) Is halved

Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Last Answer : resistance

Description : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its length is doubled and the den

Last Answer : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its ... 2` C. `4 : 1` D. `1 : 4`

Last Answer : A wire of resistance R has it length and cross-section both doubled. Its resistance will become R.

Description : Assuming flow to be laminar, if the diameter of the pipe is halved, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Be quadrupled

Last Answer : (A) Increase

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

Description : The cross-sectional area of shipboard electrical cable is expressed in _____________. A. millimeters B. gage numbers C. centimeters D. circular mils

Last Answer : Answer: D

Description : Which solid AWG wire size has the smallest physical cross-sectional area? A. 12 B. 14 C. 16 D. 18

Last Answer : Answer: D

Description : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2

Last Answer : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225mm2 when a load ... 's modulus of steel= 2 1011 N/m2]

Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.

Description : If the length of a simple pendulum is halved then its period of oscillation is - (1) doubled (2) halved (3) increased by a factor √ 2 (4) decreased by a factor √ 2

Last Answer : (4) decreased by a factor √ 2

Description : If the length of a simple pendulum is halved then its period of oscillation is (1) doubled (2) halved (3) increased by a factor root 2 (4) decreased by a factor root  2

Last Answer : decreased by a factor root 2

Description : If bandwidth is doubled, the signal power is _________. A. not changed B. quadrupled C. tripled D. doubled

Last Answer : A. not changed

Description : In a chemical reaction as shown in the bellow figure, it is observed that the (i) Rate of formation of 'P' is doubled on doubling the concentration of 'X' (ii) Rate of formation of 'P' is quadrupled ... of the above chemical reaction? (A) Zeroth order (B) First order (C) Second order (D) Third order

Last Answer : (D) Third order

Description : What is the order of chemical reaction as shown in the bellow figure, if it is found that the reaction rate doubles on doubling the concentration of B and also the reaction rate doubles when the concentrations of both A & B ... the concentrations of both B & C were doubled? (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (B) 2

Description : What happens to the period of a pendulum if the mass of the bob is quadrupled? w) it is cut in half x) it stays the same y) it is doubled z) it is quadrupled

Last Answer : ANSWER: X -- IT STAYS THE SAME

Description : Resistance of an electrical conductor is proportional to its (where, l = length and A = cross-sectional area of the conductor) (A) A (B) l (C) A2 (D) Both 'a' & 'b'

Last Answer : (D) Both 'a' & 'b'

Description : If in a cylinder, radius is doubled and height is halved, then find its curved surface area. -Maths 9th

Last Answer : Let r and h be radius and height of the cyclinder, then C.S.A. = 2πrh Now, radius is doubled and height is halved. ∴ New radius = 2r and new height = h / 2 New C.S.A. = 2π × 2r × h / 2 = 2πrh .

Description : A spherical ball is divided into two equal halves. If the curved surface area of each half is 56.57 cm?, find the volume of the spherical ball.11531/cylinder-radius-halved-and-height-doubled-then-find-volume-with-respect-original-volume -Maths 9th

Last Answer : since curved surface of half of the spherical ball = 56.57 cm2 ∴ 2πr2 = 56.57 ⇒ r2 = 56.57 / 2 × 3.14 = 9 ⇒ r = 3 cm Now, volume of spherical ball = 4 / 3 πr3 = 4 / 3 × 3.14 × 3 × 3 × 3 = 113.04 cm3

Description : If in a cylinder, radius is doubled and height is halved, then find its curved surface area. -Maths 9th

Last Answer : Let r and h be radius and height of the cyclinder, then C.S.A. = 2πrh Now, radius is doubled and height is halved. ∴ New radius = 2r and new height = h / 2 New C.S.A. = 2π × 2r × h / 2 = 2πrh .

Description : A spherical ball is divided into two equal halves. If the curved surface area of each half is 56.57 cm?, find the volume of the spherical ball.11531/cylinder-radius-halved-and-height-doubled-then-find-volume-with-respect-original-volume -Maths 9th

Last Answer : since curved surface of half of the spherical ball = 56.57 cm2 ∴ 2πr2 = 56.57 ⇒ r2 = 56.57 / 2 × 3.14 = 9 ⇒ r = 3 cm Now, volume of spherical ball = 4 / 3 πr3 = 4 / 3 × 3.14 × 3 × 3 × 3 = 113.04 cm3

Description : In a cylinder, radius is doubled and height is halved, then curved surface area will be -Maths 9th

Last Answer : The curved surface area will remain same. So, there is no change in the curved surface area of cylinder . Hence the curved surface area will remain same.

Description : In a cylinder, radius is doubled and height is halved, then curved surface area will be -Maths 9th

Last Answer : The curved surface area will remain same. So, there is no change in the curved surface area of cylinder . Hence the curved surface area will remain same.

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

Description : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N.

Last Answer : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N. If a ... is produced in the wire, calculate the Poisson's ratio.

Description : The free electrons of a copper wire of cross-sectional area `10^(-6) m^(2)` acquire a drift velocity of `10^(-4) m//s` when a certain potential differ

Last Answer : The free electrons of a copper wire of cross-sectional area `10^(-6) m^(2)` acquire a drift velocity of `10 ... is `8.5xx10^(28) "electrons"//m^(3)`.

Description : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current of 1 A. The resistivity of copper `=1.7xx10^(-8)

Last Answer : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current ... of copper `=1.7xx10^(-8) Omega`m.

Description : A current of 4.8 A is flowing in a copper wire of cross-sectional area `3xx10^(-4) m^(2)`. Find the current density in the wire.

Last Answer : A current of 4.8 A is flowing in a copper wire of cross-sectional area `3xx10^(-4) m^(2)`. Find the current density in the wire.

Description : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the density of the charge-carriers in the wire

Last Answer : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the ... ms^(-1)` D. `1xx10^(-2)ms^(-1)`

Description : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc

Last Answer : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries ... 3)ms^(-1)` D. `5xx10^(-6)ms^(-1)`

Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Last Answer : all of above

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (C) Ratio of mean coil diameter to wire diameter