Description : A current of 4.8 A is flowing in a copper wire of cross-sectional area `3xx10^(-4) m^(2)`. Find the current density in the wire.
Last Answer : A current of 4.8 A is flowing in a copper wire of cross-sectional area `3xx10^(-4) m^(2)`. Find the current density in the wire.
Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1
Last Answer : 0.015 mm s-1
Description : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2
Last Answer : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225mm2 when a load ... 's modulus of steel= 2 1011 N/m2]
Description : The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch
Last Answer : Answer: B
Description : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current of 1 A. The resistivity of copper `=1.7xx10^(-8)
Last Answer : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current ... of copper `=1.7xx10^(-8) Omega`m.
Description : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the density of the charge-carriers in the wire
Last Answer : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the ... ms^(-1)` D. `1xx10^(-2)ms^(-1)`
Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg
Last Answer : a. 15 - 20 kg
Description : A water tank contains 1.3 m deep water. The pressure exerted by the water per metre length of the tank is (A) 2.89 kN (B) 8.29 kN (C) 9.28 kN (D) 28.9 kN
Last Answer : Answer: Option B
Description : The free electrons of a copper wire of cross-sectional area `10^(-6) m^(2)` acquire a drift velocity of `10^(-4) m//s` when a certain potential differ
Last Answer : The free electrons of a copper wire of cross-sectional area `10^(-6) m^(2)` acquire a drift velocity of `10 ... is `8.5xx10^(28) "electrons"//m^(3)`.
Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect
Last Answer : resistance
Description : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N.
Last Answer : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N. If a ... is produced in the wire, calculate the Poisson's ratio.
Description : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug
Last Answer : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)` ... . `3.2xx10^(-2)V//m` D. `1V//m`
Description : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc
Last Answer : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries ... 3)ms^(-1)` D. `5xx10^(-6)ms^(-1)`
Description : A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, ... B. twice as much C. the same as the original resistance D. one-half of the original resistance
Last Answer : Answer: A
Description : When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold
Last Answer : Answer: C
Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases
Description : If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled
Description : A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of ... wire C. the same as that of the original wire D. one-half that of the original wire
Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same
Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity
Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above
Last Answer : all of above
Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity
Last Answer : (D) Litre for capacity
Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section
Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.
Description : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^(2)` if the current is 10 A. Assume there
Last Answer : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^( ... `8.0xx10^(28) "electrons"//m^(3)`.
Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, subjected to w/m u.d.l., is (A) (3/4) (L²w/GA) (B) (3/2) (L²w/GA) (C) (2/3) (L3w/GA) (D) (3/2) (Lw/GA²)
Last Answer : (A) (3/4) (L²w/GA)
Description : If a concrete column 200 200 mm in cross-section is reinforced with four steel bars of 1200 mm2 total cross-sectional area. Calculate the safe load for the column if permissible stress in concrete is 5 N/mm2 ... 15 Ec (A) 264 MN (B) 274 MN (C) 284 MN (D) 294 MN
Last Answer : (C) 284 MN
Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four
Last Answer : Answer: Option D
Description : Which solid AWG wire size has the smallest physical cross-sectional area? A. 12 B. 14 C. 16 D. 18
Last Answer : Answer: D
Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection
Last Answer : (C) Ratio of mean coil diameter to wire diameter
Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection
Last Answer : (D) Force required to produce unit deflection
Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, under a concentrated load W at its free end, is (A) (2/3) (WL/AG) (B) (1/3) (WL²/EIA) (C) (3/2) (WL/AG) (D) (3/2) (WL²/AG
Last Answer : (C) (3/2) (WL/AG
Description : The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2
Last Answer : (C) 1/A
Description : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed in a uniform magnetic field of `2` tesl
Last Answer : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed ... `45^(@)` C. `60^(@)` D. `90^(@)`
Description : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section `6.0xx10^(-7) m^(2)` and its resistance is measured to be
Last Answer : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section ` ... the material at the temperature of the experiment ?
Description : A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of its magnetic moment is …………. ` MKS unit
Last Answer : A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of ... `(L^(2)I)/(4pi)` D. `(LI)/(4pi)`
Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness
Last Answer : B. Sound intensity
Description : When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above
Last Answer : (a) One coulomb
Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5
Last Answer : Answer: Option C
Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull
Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large
Description : Calculate the conductivity of a wire of length 2 m, area of cross-sectionl `2 cm^(2)` and resistance `10^(-4) Omega`.
Last Answer : Calculate the conductivity of a wire of length 2 m, area of cross-sectionl `2 cm^(2)` and resistance `10^(-4) Omega`.
Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option
Last Answer : (C) 120 N/mm
Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2 , the side of the rod, is (A) 1 cm (B) 1.5 cm (C) 2 cm (D) 2.5 cm
Last Answer : (C) 2 cm
Description : Rail section is generally designated by its A. Total weight B. Total length C. Weight per metre length D. Area of its cross-section
Last Answer : C [Weight per metre length] Explanation: The rail section is designated by its weight in 1b/yard or in kg/m. The standard rail sections in use on Indian Railways are 60 kg/m, 52 kg/m and 9OR ... 60R for MG and 50R for NG. In India, the standard rails are either of medium manganese or carbon steels.
Description : When a certain length of wire is turned into one circular loop, the magnetic induction at the centre of coil due to some current flowing is `B_(1)` If
Last Answer : When a certain length of wire is turned into one circular loop, the magnetic induction at the centre of coil due to ... 1)` C. `3B_(1)` D. `27B_(1)`
Description : The existing resistance of a conductor is dependent upon its length, cross-sectional area, _____________. A. temperature and insulation B. material and insulation C. resistive coefficient and material D. material and temperature
Description : The resistance of a conductor varies _____________. A. directly as its length and inversely as its cross-sectional area B. inversely as its length and directly as its cross-sectional area C. directly ... as its cross-sectional area D. inversely as its length and inversely as its cross-sectional area
Description : Stress is force applied on A. volume B. cross sectional area C. unit length D. across diagonal
Last Answer : cross sectional area
Description : For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these
Last Answer : (B) Cross-sectional area
Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these
Last Answer : (B) Slenderness ratio
Description : Resistance of an electrical conductor is proportional to its (where, l = length and A = cross-sectional area of the conductor) (A) A (B) l (C) A2 (D) Both 'a' & 'b'
Last Answer : (D) Both 'a' & 'b'
Description : 16. Surface tension force is the product of surface tension per unit length and cross-sectional area of flow. A) Correct B) Incorrect
Last Answer : B