Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors c) Lightning protection d) Fire protection

Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors   c) Lightning protection d) Fire protection
by

1 Answer

Answer :

Ans: D
by
selected by

Related questions

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

ACSR (Aluminium Conductor Steel Reinforced) are used as (A) over head transmission lines. (B) super conductors. (C) fuse (D) underground cables.

Description : ACSR (Aluminium Conductor Steel Reinforced) are used as (A) over head transmission lines. (B) super conductors. (C) fuse (D) underground cables.

Last Answer : (A) over head transmission lines.

For a fault in switchyard lightning arrestor, what protection will act?

Description : For a fault in switchyard lightning arrestor, what protection will act?

Last Answer : Bus bar differential protection.  

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

Which of the listed conditions could indicate the need for cleaning electrical insulation? A. Low ambient temperature B. Low operating temperature C. High dielectric strength D. Low megger readings

Description : Which of the listed conditions could indicate the need for cleaning electrical insulation? A. Low ambient temperature B. Low operating temperature C. High dielectric strength D. Low megger readings

Last Answer : Answer: D

The dielectric strength of a vacuum or dry air is approximately ________________. A. 450 volts/inch B. 1000 volts/inch C. 20-kv/inch D. 50-kv/inch

Description : The dielectric strength of a vacuum or dry air is approximately ________________. A. 450 volts/inch B. 1000 volts/inch C. 20-kv/inch D. 50-kv/inch

Last Answer : Answer: C

A megohmmeter is used to measure _____________. A. voltage B. dielectric strength C. current D. power

Description : A megohmmeter is used to measure _____________. A. voltage B. dielectric strength C. current D. power

Last Answer : Answer: B

When using a megohmmeter to test the dielectric strength of wire insulation, a continuous series of slight downscale kicks by the pointer is result of ____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the windings D. the dielectric-absorption effect of the insulation

Description : When using a megohmmeter to test the dielectric strength of wire insulation, a continuous series of slight downscale kicks by the pointer is result of ____________. A. good insulation B. the ... dirty insulation C. the capacitance of the windings D. the dielectric-absorption effect of the insulation

Last Answer : Answer: B

When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Description : When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of ... of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Last Answer : Answer: C

Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher dielectric strength than number 12 AWG wire. C. Number 12 AWG wire is larger than Number 10 AWG wire. D. Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Description : Which of the following statements about copper wire sized by the AWG rating is correct? A. Number 12 AWG wire has a higher current rating than number 10 AWG wire. B. Number 10 AWG wire has a higher ... Number 12 AWG wire at 25°C has more resistance per 1000 feet than No. 10 AWG wire at 25°C.

Last Answer : Answer: D

Which of the following statements concerning copper wire sized by AWG numbers is correct? A. Number 12 AWG wire has a higher current rating than 10 AWG wire. B. Number 12 AWG wire at 25°C has more resistance per 1000 ft than 10 AWG wire at 25°C. C. Number 10 AWG wire has a higher dielectric strength than 12 AWG wire. D. Number 12 AWG wire is larger than number 10 AWG wire.

Description : Which of the following statements concerning copper wire sized by AWG numbers is correct? A. Number 12 AWG wire has a higher current rating than 10 AWG wire. B. Number 12 AWG wire at 25°C has more ... dielectric strength than 12 AWG wire. D. Number 12 AWG wire is larger than number 10 AWG wire.

Last Answer : Answer: B

What is meant by Dielectric strength?

Description : What is meant by Dielectric strength? 

Last Answer : The maximum electrical potential gradient that a material can withstand without rupture usually specified in volts/millimeter of thickness. This also has known as electric strength. 

Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Description : Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Last Answer : B. Undergrounding

To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor – (1) should be made of a good conductor but can be of any shape (2) should be in the form of a vertical rod (3) can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Description : To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor - (1) should be made of a good conductor but can be of any shape (2) should be in the form ... can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Last Answer : (4) should be made of a good conductor like copper with sharppointed edges Explanation: A lightning conductor is made up of a sharp pointed metal (usually copper metal, as it is a very good ... cloud, it will first strike the pointed tip of the lightning conductor and quickly travel to the earth.

The metal used to make lightning conductors is – (1) Iron (2) Aluminum (3) Copper (4) Zinc

Description : The metal used to make lightning conductors is – (1) Iron (2) Aluminum (3) Copper (4) Zinc

Last Answer : (3) Copper Explanation: A lightning rod is a metal rod or metallic object mounted on top of a building, electrically bonded using a wire or electrical conductor to interface with ground or "earth" ... wire, instead of passing through the building, where it could start a fire or cause electrocution.

To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor (1) should be made of a good conductor but can be of any shape (2) should be in the form of a vertical rod (3) can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Description : To prevent damage from lightning, lightning conductors are used on tall structures. The lightning conductor (1) should be made of a good conductor but can be of any shape (2) should be in the form of ... can be of any shape (4) should be made of a good conductor like copper with sharp-pointed edges

Last Answer : should be made of a good conductor like copper with sharp-pointed edges

The metal used to make lightning conductors is (1) Iron (2) Aluminium (3) Copper (4) Zinc

Description : The metal used to make lightning conductors is (1) Iron (2) Aluminium (3) Copper (4) Zinc

Last Answer : Copper

The amount of voltage induced in the windings of an AC generator depends on ____________. A. the number of conductors in series per winding B. the speed at which the magnetic field passes across the winding C. the strength of the magnetic field D. all of the above

Description : The amount of voltage induced in the windings of an AC generator depends on ____________. A. the number of conductors in series per winding B. the speed at which the magnetic field passes across the winding C. the strength of the magnetic field D. all of the above

Last Answer : Answer: D

Both the conduction and displacement current densities coexist in which medium? a) Only conductors in air b) Only dielectrics in air c) Conductors placed in any dielectric medium d) Both the densities can never coexist

Description : Both the conduction and displacement current densities coexist in which medium? a) Only conductors in air b) Only dielectrics in air c) Conductors placed in any dielectric medium d) Both the densities can never coexist

Last Answer : c) Conductors placed in any dielectric medium

Dielectric constant will be high in a) Conductors b) Semiconductors c) Insulators d) Superconductors

Description : Dielectric constant will be high in a) Conductors b) Semiconductors c) Insulators d) Superconductors

Last Answer : c) Insulators

What types of losses cause the dielectric material between the conductors to be heated?

Description : What types of losses cause the dielectric material between the conductors to be heated?

Last Answer : Dielectric losses.

Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Description : Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Last Answer : (C) dielectric materials.

Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the oil may cause the sheath to burst (c) Unequal expansion may create voids in the insulation which will lead to ionization (d) The thermal instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Last Answer : (e) All of the above

Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different concentrations (d) capacitance required to be introduced at different lengths to counter the effect of inductance (e) none of the above

Description : Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different ... introduced at different lengths to counter the effect of inductance (e) none of the above

Last Answer : (a) use of dielectrics of different permeabilities

In capacitance grading of cables we use a ______ dielectric. (a) composite (b) porous (c) homogeneous (d) hygroscopic

Description : In capacitance grading of cables we use a ______ dielectric. (a) composite (b) porous (c) homogeneous (d) hygroscopic

Last Answer : (a) composite

The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Description : The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Last Answer : (c) smaller dielectric loss

Multicore cables generally use (a) square conductors (b) circular conductors (c) rectangular conductors (d) sector-shaped conductors (e) none of the above

Description : Multicore cables generally use (a) square conductors (b) circular conductors (c) rectangular conductors (d) sector-shaped conductors (e) none of the above

Last Answer : (d) sector-shaped conductors

In the cables, the location of fault is usually found out by comparing (a) the resistance of the conductor (b) the inductance of conductors (c) the capacitances of insulated conductors (d) all above parameters

Description : In the cables, the location of fault is usually found out by comparing (a) the resistance of the conductor (b) the inductance of conductors (c) the capacitances of insulated conductors (d) all above parameters

Last Answer : (c) the capacitances of insulated conductors

Bile, an emulsifier liquid, is made by the liver and later stored within the gallbladder and released in the duodenum. Bile is composed of bile salts, cholesterol and bile pigments. Bile salts are detergents, amphiphilic molecules, i.e., molecules with a polar water-soluble portion and a non-polar fat-soluble portion. This feature allows bile salts to enclose fats inside water-soluble micelles in a process called emulsification for them to be in contact with intestinal lipases, enzymes that break fats into simpler fatty acids and glycerol. Digestion System - Image Diversity: gallbladder

Description : Bile, an emulsifier liquid, is made by the liver and later stored within the gallbladder and released in the duodenum. Bile is composed of bile salts, cholesterol and bile pigments. ... enzymes that break fats into simpler fatty acids and glycerol. Digestion System - Image Diversity: gallbladder

Last Answer : What is the adnexal organ of the digestive system in which bile is stored?

An emulsifier is an agent which – (1) stabilises an emulsion (2) aids the flocculation of an emulsion (3) accelerates the dispersion (4) homogenises an emulsion

Description : An emulsifier is an agent which – (1) stabilises an emulsion (2) aids the flocculation of an emulsion (3) accelerates the dispersion (4) homogenises an emulsion

Last Answer : (1) stabilises an emulsion

The cyanogas pump is a /an— (A) Duster (B) Fumigator (C) Sprayer (D) Emulsifier

Description : The cyanogas pump is a /an— (A) Duster (B) Fumigator (C) Sprayer (D) Emulsifier

Last Answer : (D) Emulsifier

The role of borax in cold creams is (A) anti-microbial agent (B) to provide fine particles to polish skin (C) in-situ emulsifier (D) antioxidant

Description : The role of borax in cold creams is (A) anti-microbial agent (B) to provide fine particles to polish skin (C) in-situ emulsifier (D) antioxidant

Last Answer : (A) anti-microbial agent

An utility modifier is which of the following a). Emulsifier b). Antifoam agents c). dispersants d). All

Description : An utility modifier is which of the following a). Emulsifier b). Antifoam agents c). dispersants d). All

Last Answer : d). All

Naphthalic anhydride is an a). a safener b). an adjuvant c). an emulsifier d). a pellet

Description : Naphthalic anhydride is an a). a safener b). an adjuvant c). an emulsifier d). a pellet

Last Answer : a). a safener

An emulsifier is an agent which (1) stabilises an emulsion (2) aids the flocculation of an emulsion (3) accelerates the dispersion (4) homogenises an emulsion

Description : An emulsifier is an agent which (1) stabilises an emulsion (2) aids the flocculation of an emulsion (3) accelerates the dispersion (4) homogenises an emulsion

Last Answer :  stabilises an emulsion

Impressed current cathodic protection is used on vessels instead of _________________. A. fire alarm systems B. repeated painting C. sacrificial zincs D. vacuum tube degaussing systems

Description : Impressed current cathodic protection is used on vessels instead of _________________. A. fire alarm systems B. repeated painting C. sacrificial zincs D. vacuum tube degaussing systems

Last Answer : Answer: C

The purpose of a motor undervoltage protection device is to _____________. A. prevent high armature current when power is restored B. start the motor at a very low voltage C. trip the load off the motor in case of fire D. protect personnel from low voltage shocks

Description : The purpose of a motor undervoltage protection device is to _____________. A. prevent high armature current when power is restored B. start the motor at a very low voltage C. trip the load off the motor in case of fire D. protect personnel from low voltage shocks

Last Answer : Answer: A

For protection of rotating machines against lightning surges _______ is used.

Description : For protection of rotating machines against lightning surges _______ is used.  (1) lightning arrester (2) capacitor (3) combination of lightning arrester and capacitor (4) lightning conductor and arrester

Last Answer : For protection of rotating machines against lightning surges combination of lightning arrester and capacitor is used. 

When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Description : When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Last Answer : Ans: A

Ground resistance should be designed such that: a) grounding resistance should be as low as possible b) grounding resistance should be as high as possible c) grounding resistance should be always zero d) none of the above

Description : Ground resistance should be designed such that: a) grounding resistance should be as low as possible b) grounding resistance should be as high as possible c) grounding resistance should be always zero d) none of the above

Last Answer : Ans: A

Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets connecting a lifeboat and the vessel's electrical system must have threaded plugs. C. Machinery spaces must contain sufficient outlets for lighting all machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Description : Which of the following statements is/are true regarding requirements for receptacle outlets aboard vessels? A. Each receptacle outlet operating at 100 volts or more must have a grounding pole. B. Outlets ... machinery with a portable light having a 50 foot flexible cord. D. All of the above.

Last Answer : Answer: A

Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating each, and short circuiting the two commutator bars C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Description : Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating ... C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Last Answer : Answer: B

If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Description : If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Last Answer : Answer: B

WHAT is ZIG ZAG Grounding Transformer

Description : WHAT is ZIG ZAG Grounding Transformer

Last Answer : ANSWER: Three Single Phase Transformers can be connected to have a three phase Zig Zag Transformer. This system can be used for either grounding or developing a fourth WIRE from a three phase neutral. An example ... - three phase - three wire system to a 480Y/277 V - three phase - four wire system

What is different between resistance grounding system and resistance earthing system?

Description : What is different between resistance grounding system and resistance earthing system?

Last Answer : In resistance grounding system the neutral point of the load is connected to the ground to carry the residual current in case of unbalanced conditions. Resistance earthing system is done in an electric equipment in order to protect the equipment in occurrence of fault in the system.

How safety could be ensured by equipment grounding?

Description : How safety could be ensured by equipment grounding?

Last Answer : In order to enumerate this, let us first find out the effects of current and voltage developed during fault condition.

What is the important of equipment grounding?

Description : What is the important of equipment grounding?

Last Answer : Equipment earthing ensures safety. 

What is the important of system grounding?

Description : What is the important of system grounding?

Last Answer : It is important because: a. Earth fault protection is based on the method of neutral earthing. b. System voltage during earth fault depends on neutral earthing. c. It is a protection against arcing grounds, unbalanced voltages with respect to earth and lighting.

What does mean by equipment grounding?

Description : What does mean by equipment grounding?

Last Answer : Grounding of non-current carrying metallic parts is called equipment grounding. For instance no-current carrying parts include the following: a. Motor body, switchgear metal enclosure, transformer tank, conduits of ... c. Sheath of cables. d. Body of portable equipment such as iron, oven, etc.

What are types of grounding?

Description : What are types of grounding?

Last Answer : There are two types a. System grounding. b. Equipment grounding.