In electronic conductors, what is the reason for flow of current ?

 In electronic conductors, what is the reason for flow of current ?
by

1 Answer

Answer :

 Reason for flow of current is that moment of free electrons from higher negative potential to a lower positive potential region.   
by
selected

Related questions

Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Description : Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Last Answer : (1) offer minimum resistance to flow of electric current Explanation: A superconductor is a material that can conduct electricity or transport electrons from one atom to another with no ... is released from the material when it reaches the temperature at which it becomes superconductive.

In a DC series circuit, all the conductors have the same ____________. A. power expended in them B. voltage drop across them C. resistance to current flow D. current passing through them

Description : In a DC series circuit, all the conductors have the same ____________. A. power expended in them B. voltage drop across them C. resistance to current flow D. current passing through them

Last Answer : Answer: D

Super conductors are those substances, which (A) Offer no resistance to current flow (B) Conduct electricity at low temperature (C) Offer high resistance to current flow (D) Conduct electricity at high temperature

Description : Super conductors are those substances, which (A) Offer no resistance to current flow (B) Conduct electricity at low temperature (C) Offer high resistance to current flow (D) Conduct electricity at high temperature

Last Answer : (A) Offer no resistance to current flow

Super conductors are substances that (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Description : Super conductors are substances that (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Last Answer : offer minimum resistance to flow of electric current

State the reason for the establishment of a "unit size" for conductors.

Description : State the reason for the establishment of a "unit size" for conductors.

Last Answer : To allow comparisons between conductors of different sizes and resistance.

When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Description : When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit

Last Answer : Answer: B

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

Rate of flow of electric charge is A. electric current B. conventional current only C. electronic current only D. potential difference

Description : Rate of flow of electric charge is A. electric current B. conventional current only C. electronic current only D. potential difference

Last Answer : electric current

Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Description : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Last Answer : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a ... . `-(2F)/(3)` D. `-(F)/(3)`

The force between two long parallel wires A and B carrying current is `0.004 Nm^(-1)`. The conductors are 0.01 m apart. If the current in conductor A

Description : The force between two long parallel wires A and B carrying current is `0.004 Nm^(-1)`. The conductors are 0.01 m apart. If the current in conductor A

Last Answer : The force between two long parallel wires A and B carrying current is `0.004 Nm^(-1)`. The conductors are 0.01 m ... . `50 A ` C. `10 A` D. `100 A`

Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Description : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a force `F` on each other. Now the

Last Answer : Two long conductors, separated by a distance `d` carry current `I_(1) and I_(2)` in the same direction . They exert a ... C. `(2F)/(3)` D. `(-2F)/(3)`

As shown in the illustration, the generator field is excited with DC current provided by ____________. EL-0016 A. conductors '1', '2' and '3' B. inductor 'L1' C. rectifier 'CR1' D. winding 'S-2'

Description : As shown in the illustration, the generator field is excited with DC current provided by ____________. EL-0016 A. conductors '1', '2' and '3' B. inductor 'L1' C. rectifier 'CR1' D. winding 'S-2'

Last Answer : Answer: C

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

When insulation failure produces a low resistance current path between two conductors, the resulting condition is known as ____________. A. an open B. a short circuit C. a ground D. a surge

Description : When insulation failure produces a low resistance current path between two conductors, the resulting condition is known as ____________. A. an open B. a short circuit C. a ground D. a surge

Last Answer : Answer: B

In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage supply to the stator windings C. laminated steel core and aluminum conductors in the rotor D. interaction of the magnetic field caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Description : In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage ... caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Last Answer : Answer: B

Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Description : Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Last Answer : Answer: D

A pair of current-carrying conductors is not considered a transmission line unless it is at least ___ λ long at the signal frequency. A. 0.1 B. 0.3 C. 0.2 D. 0.4

Description : A pair of current-carrying conductors is not considered a transmission line unless it is at least ___ λ long at the signal frequency. A. 0.1 B. 0.3 C. 0.2 D. 0.4

Last Answer : A. 0.1

Both the conduction and displacement current densities coexist in which medium? a) Only conductors in air b) Only dielectrics in air c) Conductors placed in any dielectric medium d) Both the densities can never coexist

Description : Both the conduction and displacement current densities coexist in which medium? a) Only conductors in air b) Only dielectrics in air c) Conductors placed in any dielectric medium d) Both the densities can never coexist

Last Answer : c) Conductors placed in any dielectric medium

Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Description : Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Last Answer : (d) 2x 1(T7 N/m)

The force between two long parallel conductors is inversely proportional to (a) radius of conductors (b) current in one conductor (c) product of current in two conductors (d) distance between the conductors

Description : The force between two long parallel conductors is inversely proportional to (a) radius of conductors (b) current in one conductor (c) product of current in two conductors (d) distance between the conductors

Last Answer : (d) distance between the conductors

The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Description : The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Last Answer : (b) proportional to X

Current carried by each of the two long parallel conductors is doubled. If their separation is also doubled , force between them is

Description : Current carried by each of the two long parallel conductors is doubled. If their separation is also doubled , force between them is

Last Answer : Increase two fold

Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Description : Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Last Answer : (B) temperature.

In DC generators, armature reaction is produced actually by (A) Its field current. (B) Armature conductors. (C) Field pole winding. (D) Load current in armature.

Description : In DC generators, armature reaction is produced actually by (A) Its field current. (B) Armature conductors. (C) Field pole winding. (D) Load current in armature.

Last Answer : Ans: D Because load current in armature gives rise to armature mmf which react with main field mmf.

The cylindrical windings using circular conductors are used for current rating of (a) upto 20 A (b) upto 40 A (c) upto 60 A (d) upto 80 A

Description : The cylindrical windings using circular conductors are used for current rating of (a) upto 20 A (b) upto 40 A (c) upto 60 A (d) upto 80 A

Last Answer : (d) upto 80 A

The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight across the slot and around the iron at the bottom (c) The permanence of air paths is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Description : The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight ... is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Last Answer : (d) All of the above

In case of semi-conductors, the ratio of conduction current to displacement current is:

Description :  In case of semi-conductors, the ratio of conduction current to displacement current is: A) more than 200 and less than 1000 B) less than 100 but greater than 1/100 C) less than 1/100 D) more than 1000

Last Answer : In case of semi-conductors, the ratio of conduction current to displacement current is:  less than 100 but greater than 1/100

Two parallel conductors are separated by a distance, d carrying a current, I in the same direction. The magnetic

Description : Two parallel conductors are separated by a distance, d carrying a current, I in the same direction. The magnetic field along a line running parallel to the conductors and midway between them is (A) zero (B) proportional to I (C) proportional to d (D) proportional to the permeability of the medium. 

Last Answer : The  magnetic  field  along  the conductor at  the  midway point  is  zero  because  equal  magnitide  of  field  are produced  in  each conductor   therefore  the  resultant  magnetic field  at  the  midway  is  zero.

The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is

Description : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

Last Answer : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the Surface of conductor. 

Why ABC is considered electro-mechanical computer? A) Because it was invented before electronic computers were developed B) Because there are wheels, drums, bars to rotate and move to produce result C) Because they use the flow of electrons in different component D) None of above

Description : Why ABC is considered electro-mechanical computer? A) Because it was invented before electronic computers were developed B) Because there are wheels, drums, bars to rotate and move to produce result C) Because they use the flow of electrons in different component D) None of above

Last Answer : Answer : B

Assertion :- Bond Dissociation energy is `F_(2) gt Cl_(2)` Reason:- `Cl_(2)` have more electronic repulsion than `F_(2)`.

Description : Assertion :- Bond Dissociation energy is `F_(2) gt Cl_(2)` Reason:- `Cl_(2)` have more electronic repulsion than `F_(2)`.

Last Answer : Assertion :- Bond Dissociation energy is `F_(2) gt Cl_(2)` Reason:- `Cl_(2)` have more ... is False. D. If both Assertion & Reason are false

Why We Giving Input To Electronic Amplifier In Inverting Pin? What Is The Reason Behind That?

Description : Why We Giving Input To Electronic Amplifier In Inverting Pin? What Is The Reason Behind That?

Last Answer : if we need a phase shift than we give input n inverting pin or when we need to boost signal at higher level, i.e; using cascade stages of amplification(even) than we also use inverting pin.