Description : One of a class of storage device devices that can access storage locations in any order is a. DTE b. DASD c. DDE d. DDE
Last Answer : b. DASD
Description : One of a class of storage device devices that can access storage locations in any order is a. DTE b. DASD c. DDE
Description : One of a class of storage device devices that can access storage locations in any order is a. DTE b. DASD c. DDE d. DDE Correct A
Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing
Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data
Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above
Last Answer : DTE/DCE interface
Description : Hard Disks and Diskettes are: a) Direct Access Storage Devices b) Sequential Access Storage Devices c) Rarely used Microcomputers d) None of The Above
Last Answer : a) Direct Access Storage Devices
Description : Offline device is A) A device which is not connected to CPU B) A device which is connected to CPU C) A direct access storage device D) An I/O device
Last Answer : Answer : A
Description : A storage device or medium where the access time is dependent upon the location of the data is called ________ A. Parallel access B. Serial access C. Both (A) and (B) D. None of the above
Last Answer : B. Serial access
Description : Storage device where time to retrieve stored information is independent of address where it is stored is called _______ A. Random Access Memory B. Secondary Memory C. System D. None of the above
Last Answer : A. Random Access Memory
Description : _________ is the time from the start of one storage device access to the time when the next access can be started. A. Mode B. Access time C. capacity D. None of the Above
Last Answer : B. Access time
Description : Offline device is: a) A device which is not connected to CPU b) A device which is connected to CPU c) A direct access storage device d) None of The Above
Last Answer : a) A device which is not connected to CPU
Description : Both the ALU and Control Section have special purpose storage locations called : (1) Registers (2) Accumulators (3) Bus (4) Address
Last Answer : Registers
Description : What is the full form of DASD ?
Last Answer : The full form of DASD is: Direct Acces Storage Device.
Description : You want to understand if users use their mobile phone to access your site. Which of the following approach is preferable? A. Ask "Are you using a mobile phone to access our site?" ... report Audience/Mobile/Overview D. This cannot be known because people use multiple devices to browse the Web
Last Answer : C. Look at the report Audience/Mobile/Overview
Description : What is the access point (AP) in a wireless LAN? a) device that allows wireless devices to connect to a wired network b) wireless devices itself c) both device that allows wireless devices to connect to a wired network and wireless devices itself d) all the nodes in the network
Last Answer : a) device that allows wireless devices to connect to a wired network
Description : Which is one of the important I/O devices and is most commonly used as permanent storage device in any processor: a. Soft disk b. Hard disk c. Botha &b d. None of these
Last Answer : b. Hard disk
Description : Devices interconnected by the LAN should include A. Computers and terminals B. mass storage device, printers and plotters C. bridges and gateways D. All of theabove E. None of the above
Last Answer : All of theabove
Description : What is the full form of DTE ?
Last Answer : DTE 's full form Director Of Technical Education.
Description : In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready
Last Answer : B. Clear to send
Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)
Last Answer : D. Data terminal equipment (DTE)
Description : A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC
Last Answer : B. DTE
Description : An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card
Last Answer : (B) MODEM
Description : As shown in the illustration, what is the meaning of the numbers in brackets [ ] at location '31/33U'? EL-0100 A. Four separate devices with these part numbers feed signals into this point. ... continues on those four pages and connects to devices at the indicated coordinates. D. None of the above.
Last Answer : Answer: C
Description : Where do I access device storage on an android cell phone?
Last Answer : If you didn’t choose a location, it is in your “download” folder. Use your file explorer on your phone or just plug your phone into your laptop. It just shows up as a flash drive. Browse to that download folder.
Description : A magnetic tape is a direct access storage device. -Technology
Last Answer : FalseIt is a non-volatile memory hence, it is not direcdy accessible by the CPU.
Description : A storage device whe3re the access time is depended upon the location of the data is a. Random access b. Serial access c. Sequential access d. Transaction access
Last Answer : Serial access
Description : Offline device is a. A device which is not connected to CPU b. A device which is connected to CPU c. A direct access storage device d. An I/O device
Last Answer : A device which is not connected to CPU
Last Answer : a. A device which is not connected to CPU
Last Answer : b. Serial access
Description : At locations where access to the new bridge construction is available by rail, the launching of girders upto 18.3 m which method is ideal. a) slew in slew out method b) gantry method c) Launching of girders with the help of a BFR*: d) Pantoon method
Last Answer : c) Launching of girders with the help of a
Description : Absolute entitiesare_ Ss whom value signify storage locations that are independent of resulting machine code: a. Numeric constants b. String constants c. Fixed addresses d. Operation codes e. Allofthese
Last Answer : e. Allofthese
Description : After actual locations for main storage are known, a __ adjusts relative addresses to these actual locations: a. Relocating loader b. Locating loader c. Default loader d. None of these
Last Answer : a. Relocating loader
Description : Which of the following is an edge-storage or content-delivery system that caches data in different physical locations? a) Amazon Relational Database Service b) Amazon SimpleDB c) Amazon Cloudfront d) Amazon Associates Web Services
Last Answer : Amazon Cloudfront
Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router
Last Answer : 2) A multi-homed firewall
Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router
Last Answer : 2 A multi-homed firewall
Description : Which of the following items are examples of storage devices? A) Floppy / hard disks B) CD-ROMs C) Tape devices D) All of the above
Last Answer : Answer : D
Description : A name or number used to identify storage location devices? A) A byte B) A record C) An address D) All of above
Last Answer : Answer : C
Description : The secondary storage devices can only store data but they cannot perform A) Arithmetic Operation B) Logic operation C) Fetch operations D) Either of the above
Description : Which of the following storage devices can store maximum amount of data? A) Floppy Disk B) Hard Disk C) Compact Disk D) Magneto Optic Disk
Last Answer : Answer : B
Description : Which of the following is used to hold running program instructions? a) Primary Storage b) Virtual Storage c) Internal Storage d) Minor Devices
Last Answer : Answer: a Explanation: The primary storage is responsible for holding the data, intermediate results and the results of ongoing processes or jobs. Virtual storage is the main memory storage required for saving large amount of data for future reference. The other options are invalid
Description : Disks Drives, CD - ROM driver, Tape Drives are: a) Primary Storage Devices b) Secondary Storage Devices c) Both of Above d) None of These
Last Answer : b) Secondary Storage Devices
Description : The most common type of storage devices are ______: a) Persistent b) Optical c) Magnetic d) Flash e) Steel
Last Answer : b) Optical
Description : Hardware includes a) all devices used to input data into a computer b) sets of instructions that a computer runs or executes c) the computer and all the devices connected to it that ... involved in processing information including the central processing unit, memory and storage e) None of these
Last Answer : c) the computer and all the devices connected to it that are used to input and output data
Description : Which of the following is an example of storage devices? 1) Magnetic disks 2) Tapes 3) DVDs 4) All of these
Last Answer : 4) All of these
Description : Which of the following is an example of storage devices? 1 Magnetic disks 2 Tapes 3 DVDs 4 All of these
Last Answer : 4 All of these
Description : Related to computers, what is ‘Wetware’ ? (1) Computer programs (2) Circuitory (3) Human brain (4) Chemical storage devices
Last Answer : Human brain
Description : ______ are system programs, which are responsible for proper functioning of devices. A. Device Drivers B. Language translators C. System Utilities D. Operating system
Last Answer : A. Device Drivers