In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready

In indication signal for a handshake form the DCE to the DTE in response to an active
condition for the request to send a signal.
A. Data transmission
B. Clear to send
C. Receive data
D. Data set ready
by

1 Answer

Answer :

B. Clear to send
by

Related questions

The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Last Answer : D. Data terminal equipment (DTE)

A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Description : A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Last Answer : B. DTE

The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Description : Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Last Answer : d) all of the mentioned

The following is not a valid indication for parenteral iron therapy: A. Inadequate response to oral iron due to patient noncompliance B. Anaemia during pregnancy C. Severe anaemia associated with chronic bleeding D. Anaemia in a patient of active rheumatoid arthritis

Description : The following is not a valid indication for parenteral iron therapy: A. Inadequate response to oral iron due to patient noncompliance B. Anaemia during pregnancy C. Severe anaemia associated with chronic bleeding D. Anaemia in a patient of active rheumatoid arthritis

Last Answer : B. Anaemia during pregnancy

What would be the proper command to set a DCE clock rate of 56k for a serial interface? A. Router (config) # clockrate 56000 B. Router# clockrate 56000. C. Router (config-if) #clock rate 56000 D. Router (config-if) # clockrate 56k

Description : What would be the proper command to set a DCE clock rate of 56k for a serial interface? A. Router (config) # clockrate 56000 B. Router# clockrate 56000. C. Router (config-if) #clock rate 56000 D. Router (config-if) # clockrate 56k

Last Answer : Router (config-if) #clock rate 56000

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Last Answer : A. Communication satellite

An antenna that can only receive a television signal. A. Isotropic antenna B. TVRO C. Reference antenna D. Yagi antenna

Description : An antenna that can only receive a television signal. A. Isotropic antenna B. TVRO C. Reference antenna D. Yagi antenna

Last Answer : B. TVRO

Point out the wrong statement. a) Taken as a unit, “Request => Process => Response” is not an atomic transaction b) A coherent transaction either succeeds and is enacted, or fails and is rolled back c) When rollback is not possible due to optimistic transaction commitment in a multiuser application, durability requires correcting the condition d) None of the mentioned

Description : Point out the wrong statement. a) Taken as a unit, Request => Process => Response is not an atomic transaction b) A coherent transaction either succeeds and is enacted, or ... transaction commitment in a multiuser application, durability requires correcting the condition d) None of the mentioned

Last Answer : Taken as a unit, “Request => Process => Response” is not an atomic transaction

A satellite which simply reflects the signal without further amplification A. Passive satellite B. Active satellite C. Geostationary satellite D. Domestic satellite

Description : A satellite which simply reflects the signal without further amplification A. Passive satellite B. Active satellite C. Geostationary satellite D. Domestic satellite

Last Answer : A. Passive satellite

What propagation condition is usually indicated when a VHF signal is received from a station over 500 miles away? A. D-layer absorption B. Faraday rotation C. Tropospheric ducting D. Moonbounce

Description : What propagation condition is usually indicated when a VHF signal is received from a station over 500 miles away? A. D-layer absorption B. Faraday rotation C. Tropospheric ducting D. Moonbounce

Last Answer : C. Tropospheric ducting

What propagation condition is usually indicated when a VHF signal is received from a station over 5000 miles away? A. Moonbounce B. D-layer absorption C. Tropospheric ducting D. Faraday rotation

Description : What propagation condition is usually indicated when a VHF signal is received from a station over 5000 miles away? A. Moonbounce B. D-layer absorption C. Tropospheric ducting D. Faraday rotation

Last Answer : C. Tropospheric ducting

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : B. The approximation of the quantized signal

Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Description : Which causes a quantization noise in PCM system? A. Serial transmission errors B. The approximation of the quantized signal C. The synchronization between encoder and decoder D. Binary coding techniques

Last Answer : The approximation of the quantized signal

A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Description : A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Last Answer : C. Directional coupler

What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Last Answer : D. A frequency modulated continuous wave

A pair of current-carrying conductors is not considered a transmission line unless it is at least ___ λ long at the signal frequency. A. 0.1 B. 0.3 C. 0.2 D. 0.4

Description : A pair of current-carrying conductors is not considered a transmission line unless it is at least ___ λ long at the signal frequency. A. 0.1 B. 0.3 C. 0.2 D. 0.4

Last Answer : A. 0.1

What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Description : What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Last Answer : C. Propagation delay

What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Description : What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A

Last Answer : D. A

Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Description : Determine the dB gain of a receiving antenna which delivers a microvolt signal to a transmission line over that of an antenna that delivers a 20 microvolt signal under identical circumstances. A. 10 dB B. 6 dB C. 3 dB D. 8 dB

Last Answer : B. 6 dB

Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Description : Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Last Answer : A. Transmission system engineering

What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Description : What is the effect in over modulated amplitude modulated radio broadcasting transmission? A. Interference to adjacent channel B. Higher fidelity C. Increase noise D. Higher audio signal

Last Answer : A. Interference to adjacent channel

What is the advantage of sidetone? A. High transmission efficiency B. Results to a strengthened signal C. No energy dissipation D. Assures that the telephone is working

Description : What is the advantage of sidetone? A. High transmission efficiency B. Results to a strengthened signal C. No energy dissipation D. Assures that the telephone is working

Last Answer : D. Assures that the telephone is working

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Description : Quantization noise is caused by A. binary coding techniques B. serial transmission errors C. the synchronization between encoder and decoder D. the approximation of the quantized signal

Last Answer : D. the approximation of the quantized signal

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

ECE Board Exam March 1996 The expander in a companding device provides ___________. A. greater amplification for low signal levelsB. less amplification for low signal levels C. greater amplification for high signal levels D. lesser pressure for transmission

Description : ECE Board Exam March 1996 The expander in a companding device provides ___________. A. greater amplification for low signal levels B. less amplification for low signal levels C. greater amplification for high signal levels D. lesser pressure for transmission

Last Answer : B. less amplification for low signal levels

Width of frequency band just enough to ensure the transmission of information at a required rate and quality required, and under a specified condition and class of emission. A. Occupied bandwidth B. Transmission bandwidth C. Necessary bandwidth D. Frequency bandwidth

Description : Width of frequency band just enough to ensure the transmission of information at a required rate and quality required, and under a specified condition and class of emission. A. Occupied bandwidth B. Transmission bandwidth C. Necessary bandwidth D. Frequency bandwidth

Last Answer : C. Necessary bandwidth

Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Description : Average power of a radio transmitter supplied to the antenna transmission line by a transmitter during one radio frequency cycle taken under the condition of no modulation. A. Peak envelop power B. Rated power C. Carrier power D. Mean power

Last Answer : C. Carrier power

The width of the frequency band which is just sufficient to ensure the transmission of information at the rate and with the quality required under a specified condition and class of emission. A. Occupied bandwidth B. Reference frequency C. Necessary bandwidth D. Frequency tolerance bandwidth

Description : The width of the frequency band which is just sufficient to ensure the transmission of information at the rate and with the quality required under a specified condition and class of emission. A. Occupied bandwidth B. Reference frequency C. Necessary bandwidth D. Frequency tolerance bandwidth

Last Answer : C. Necessary bandwidth

Identify the wrong statement with reference to immunity. (a) When exposed to antigen (living or dead) antibodies are produced in the host’s body. It is called “Active immunity”. (b) When ready-made antibodies are directly given, it is called “Passive immunity”(c) Active immunity is quick and gives full response. (d) Fetus receives some antibodies from mother, it is an example for passive immunity.

Description : Identify the wrong statement with reference to immunity. (a) When exposed to antigen (living or dead) antibodies are produced in the host's body. It is called Active immunity . (b) When ... full response. (d) Fetus receives some antibodies from mother, it is an example for passive immunity

Last Answer : c) Active immunity is quick and gives full response.

TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Description : TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Last Answer : A. bearing and distance indication

ECE Board Exam March 1996 TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Description : ECE Board Exam March 1996 TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Last Answer : A. bearing and distance indication

What kind of signal does it send to loyal Republican voters when even Paul Ryan is not yet ready to endorse their presumptive nominee, Trump?

Description : What kind of signal does it send to loyal Republican voters when even Paul Ryan is not yet ready to endorse their presumptive nominee, Trump?

Last Answer : We republicans don’t generally like Trump. We despise Hillary and we hate Bernie I don’t think there is a plan. I’m seriously considering not voting in this election, first time I ever have.

Sudden fall in barometer is indication of (1) Storm (2) Rain (3) Tide (4) Clear weather

Description : Sudden fall in barometer is indication of (1) Storm (2) Rain (3) Tide (4) Clear weather

Last Answer : (3) Storm Explanation: Sudden fall in barometer is indication of Storm. A barometer measures air pressure: A "rising" barometer indicates increasing air pressure; a "falling" barometer indicates decreasing air pressure.

Which section is basically a sequence of instruction with a clear indication of beginning and end for updating shared variables. a. Racing section b. Critical section c. d. Both None of thes

Description : Which section is basically a sequence of instruction with a clear indication of beginning and end for updating shared variables. a. Racing section b. Critical section c. d. Both None of thes

Last Answer : . Critical sectio

An abrupt and sudden fall in the reading of barometer is an indication of the (A) Storm (B) Rain (C) Clear weather (D) Cold wave

Description : An abrupt and sudden fall in the reading of barometer is an indication of the (A) Storm (B) Rain (C) Clear weather (D) Cold wave

Last Answer : (A) Storm

For individuals known to be dying by virtue of age and/or diagnoses, which of the following signs indicate approaching death: a) Increased restlessness As the oxygen supply to the brain decreases, the patient may become restless. b) Increased wakefulness As the body weakens, the patient will sleep more and begin to detach from the environment. c) Increased eating For many patients, refusal of food is an indication that they are ready to die. d) Increased urinary output Based upon decreased intake, urinary output generally decreases in amount and frequency.

Description : For individuals known to be dying by virtue of age and/or diagnoses, which of the following signs indicate approaching death: a) Increased restlessness As the oxygen supply to the ... Increased urinary output Based upon decreased intake, urinary output generally decreases in amount and frequency.

Last Answer : a) Increased restlessness As the oxygen supply to the brain decreases, the patient may become restless.

At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Description : At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Last Answer : C) SSL record protocol

At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Description : At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Last Answer : C) SSL record protocol

What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Description : What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Last Answer : A. Obtain baseline response

What carrier system multiplexes 96 voice band channels into a single 6.312 Mbps data signal? A. T1 carrier system B. T2 carrier system C. T1C carrier system D. T3 carrier system

Description : What carrier system multiplexes 96 voice band channels into a single 6.312 Mbps data signal? A. T1 carrier system B. T2 carrier system C. T1C carrier system D. T3 carrier system

Last Answer : B. T2 carrier system

What is the full form of DTE ?

Description : What is the full form of DTE ?

Last Answer : DTE 's full form Director Of Technical Education.