If S1 is total number of modules defined in the program architecture, S3 is the number of modules whose correct function depends on prior processing then the number of modules not dependent on prior processing is: (A) 1 + S3/S1 (B) 1 - S3/S1 (C) 1 + S1/S3 (D) 1 - S1/S3

If S1 is total number of modules defined in the program architecture, S3 is the number of modules whose correct function depends on prior processing then the number of modules not dependent on prior processing is: (A) 1 + S3/S1 (B) 1 - S3/S1 (C) 1 + S1/S3 (D) 1 - S1/S3
by

1 Answer

Answer :

(B) 1 - S3/S1
by

Related questions

Which of the following statement(s) is/are true with respect to software architecture? S1: Coupling is a measure of how well the things grouped together in a module belong together logically. S2: Cohesion is a measure of the degree of interaction between software modules. S3: If coupling is low and cohesion is high then it is easier to change one module without affecting others. (1) Only S1 and S2 (2) Only S3 (3) All of S1, S2 and S3 (4) Only S1

Description : Which of the following statement(s) is/are true with respect to software architecture? S1: Coupling is a measure of how well the things grouped together in a module belong together logically. S2: Cohesion is a measure of the ... ) Only S1 and S2 (2) Only S3 (3) All of S1, S2 and S3 (4) Only S1

Last Answer : Answer: 2

The Software Maturity Index (SMI) is defined as SMI = [Mf – (Fa + Fc + Fd)] / Mf Where Mf = the number of modules in the current release. Fa = the number of modules in the current release that have been added. Fc = the number of modules in the current release that have been changed. Fd = the number of modules in the current release that have been deleted. The product begins to stabilize when (A) SMI approaches 1 (B) SMI approaches 0 (C) SMI approaches -1 (D) None of the above

Description : The Software Maturity Index (SMI) is defined as SMI = [Mf - (Fa + Fc + Fd)] / Mf Where Mf = the number of modules in the current release. Fa = the number of modules in the current release that have ... (A) SMI approaches 1 (B) SMI approaches 0 (C) SMI approaches -1 (D) None of the above

Last Answer : (A) SMI approaches 1 

If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration were in 180 degree error with respect to that of the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is proper operation. B. Reverse the 60 Hz supply connections at 'R1' and 'R2'. C. Interchange connections 'S1' and 'S2'. D. Interchange connections 'S1' and 'S3'.

Description : If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration were in 180 degree error with respect to that of the transmitter, what corrective action should be taken? EL-0092 A. No action is ... and 'R2'. C. Interchange connections 'S1' and 'S2'. D. Interchange connections 'S1' and 'S3'.

Last Answer : Answer: B

If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration turned opposite of that in the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is normal operation. B. Reverse 60 Hz supply connections to 'R1' and 'R2'. C. Interchange connections to 'S1' and 'S2'. D. Interchange connections to 'S1' and 'S3'.

Description : If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration turned opposite of that in the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is ... . C. Interchange connections to 'S1' and 'S2'. D. Interchange connections to 'S1' and 'S3'.

Last Answer : Answer: D

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions Statement 3 : The equations satisfying the condition are parallel Which of the above statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Description : If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions ... statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Last Answer : h) S2 only

If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions Statement 3 : The equations satisfying the condition are parallel Which of the above statements are true ? a) S1 only b) S1 and S2 c) S1 and S3 d) S2 only

Description : If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many ... parallel Which of the above statements are true ? a) S1 only b) S1 and S2 c) S1 and S3 d) S2 only

Last Answer : d) S2 only

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

Given the following statements : S1 : If L is a regular language then the language {uv | uϵL, vϵLR} is also regular. S2 : L = {wwR} is regular language. Which of the following is true ? (A) S1 is not correct and S2 is not correct. (B) S1 is not correct and S2 is correct. (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Description : Given the following statements : S1 : If L is a regular language then the language {uv | uϵL, vϵLR} is also regular. S2 : L = {wwR} is regular language. Which of the following is true ? (A) S1 is not ... S2 is correct. (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Last Answer : (C) S1 is correct and S2 is not correct.

Given the following two statements: S1: If L1 and L2 are recursively enumerable languages over ∑, then L1⋃L2 and L1⋂L2 are also recursively enumerable. S2: The set of recursively enumerable languages is countable. Which of the following is correct? (A) S1 is correct and S2 is not correct (B) S1 is not correct and S2 is correct (C) Both S1 and S2 are not correct (D) Both S1 and S2 are correct

Description : Given the following two statements: S1: If L1 and L2 are recursively enumerable languages over ∑, then L1⋃L2 and L1⋂L2 are also recursively enumerable. S2: The set of recursively enumerable languages is countable. ... correct (C) Both S1 and S2 are not correct (D) Both S1 and S2 are correct

Last Answer : (D) Both S1 and S2 are correct

Which of the following statement(s) regarding a linker software is/are true? I. A function of a linker is to combine several object modules into a single load module. II. A function of a linker is to replace absolute references in an object module by symbolic references to locations in other modules. (1) Only I (2) Only II (3) Both I and II (4) Neither I nor Il

Description : Which of the following statement(s) regarding a linker software is/are true? I. A function of a linker is to combine several object modules into a single load module. II. A function of a linker is to replace absolute ... modules. (1) Only I (2) Only II (3) Both I and II (4) Neither I nor Il

Last Answer : Answer: 1

The statements s1 and s2 are given as: s1: Context sensitive languages are closed under intersection, concatenation, substitution and inverse homomorphism. s2: Context free languages are closed under complementation, substitution and homomorphism. Which of the following is correct statement? (A) Both s1 and s2 are correct. (B) s1 is correct and s2 is not correct. (C) s1 is not correct and s2 is correct. (D) Both s1 and s2 are not correct.

Description : The statements s1 and s2 are given as: s1: Context sensitive languages are closed under intersection, concatenation, substitution and inverse homomorphism. s2: Context free languages are closed under complementation, ... is not correct and s2 is correct. (D) Both s1 and s2 are not correct.

Last Answer : (B) s1 is correct and s2 is not correct.

Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue may be complex structures that are ordered on one or several fields. Which of the following is correct? (A) Both S1 and S2 are incorrect. (B) S1 is correct and S2 is incorrect. (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Description : Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue ... . (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Last Answer : (D) Both S1 and S2 are correct.

Which is the correct statement(s) for Non Recursive predictive parser? S1: First(α) = {t | α => * t β for some string β } => *tβ S2: Follow(X) = { a | S => * αXa β for some strings α and β } (A) Both statements S1 and S2 are incorrect. (B) S1 is incorrect and S2 is correct. (C) S1 is correct and S2 is incorrect. (D) Both statements S1 and S2 are correct.

Description : Which is the correct statement(s) for Non Recursive predictive parser? S1: First(α) = {t | α => * t β for some string β } => *tβ S2: Follow(X) = { a | S => * αXa β for some strings ... and S2 is correct. (C) S1 is correct and S2 is incorrect. (D) Both statements S1 and S2 are correct. 

Last Answer : (D) Both statements S1 and S2 are correct.

Given the following statements: S1: Every context-sensitive language L is recursive. S2: There exists a recursive language that is not context sensitive. Which statement is correct? (A) S1 is not correct and S2 is not correct. (B) S1 is not correct and S2 is correct. (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Description : Given the following statements: S1: Every context-sensitive language L is recursive. S2: There exists a recursive language that is not context sensitive. Which statement is correct? (A) S1 is not correct and S2 is ... (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Last Answer : (D) S1 is correct and S2 is correct. 

Given the following statements: S1 : The grammars S→asb | bsa | ss | a and S→asb | bsa | a are not equivalent. S2: The grammars S→ss | sss | asb | bsa | λ and S→ss | asb | bsa | λ are equivalent. Which of the following is true? (A) S1 is correct and S2 is not correct. (B) Both S1 and S2 are correct (C) S1 is not correct and S2 is correct (D) Both S1 and S2 are not correct.

Description : Given the following statements: S1 : The grammars S→asb | bsa | ss | a and S→asb | bsa | a are not equivalent. S2: The grammars S→ss | sss | asb | bsa | λ and S→ss | asb | bsa | λ are equivalent. ... and S2 are correct (C) S1 is not correct and S2 is correct (D) Both S1 and S2 are not correct.

Last Answer : (A) S1 is correct and S2 is not correct.

Given the following statements : S1 : SLR uses follow information to guide reductions. In case of LR and LALR parsers, the look-aheads are associated with the items and they make use of the left context available to the parser. S2 : LR grammar is a larger sub-class of context free grammar as compared to that SLR and LALR grammars. Which of the following is true ? (A) S1 is not correct and S2 is not correct. (B) S1 is not correct and S2 is correct. (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Description : Given the following statements : S1 : SLR uses follow information to guide reductions. In case of LR and LALR parsers, the look-aheads are associated with the items and they make use of the left context available to ... (C) S1 is correct and S2 is not correct. (D) S1 is correct and S2 is correct.

Last Answer : (D) S1 is correct and S2 is correct.

Consider the following statements : S1: A queue can be implemented using two stacks. S2: A stack can be implemented using two queues. Which of the following is correct ? (A) S1 is correct and S2 is not correct. (B) S1 is not correct and S2 is correct. (C) Both S1 and S2 are correct. (D) Both S1 and S2 are not correct.

Description : Consider the following statements : S1: A queue can be implemented using two stacks. S2: A stack can be implemented using two queues. Which of the following is correct ? (A) S1 is correct and S2 is not correct. ( ... S2 is correct. (C) Both S1 and S2 are correct. (D) Both S1 and S2 are not correct.

Last Answer : (C) Both S1 and S2 are correct.

A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one element (s2) if δ(q, λ, b) is not empty then δ(q, c, b) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Description : A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one ... ) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Last Answer : (C) both s1 and s2

Consider the following statements S1 and S2 : S1 : A hard handover is one in which the channel in the source cell is retained and used for a while in parallel with the channel in the target cell. S2 : A soft handover is one in which the channel in the source cell is released and only then the channel in the target cell is engaged. (A) S1 is true and S2 is not true. (B) S1 is not true and S2 is true. (C) Both S1 and S2 are true. (D) Both S1 and S2 are not true.

Description : Consider the following statements S1 and S2 : S1 : A hard handover is one in which the channel in the source cell is retained and used for a while in parallel with the channel in the target cell. S2 : A soft handover ... and S2 is true. (C) Both S1 and S2 are true. (D) Both S1 and S2 are not true.

Last Answer : (D) Both S1 and S2 are not true.

FAN IN of a component A is defined as (A) Number of components that can call or pass control to component A. (B) Number of components that are called by component A. (C) Number of components related to component A. (D) Number of components dependent on component A.

Description : FAN IN of a component A is defined as (A) Number of components that can call or pass control to component A. (B) Number of components that are called by component A. (C) Number of components related to component A. (D) Number of components dependent on component A.

Last Answer : (A) Number of components that can call or pass control to component A.

extendible architecture is A. Modular design of a software application that facilitates the integration of new modules B. Showing a universal law or rule to be invalid by providing a counter example C. A set of attributes in a database table that refers to data in another table D. None of these

Description : extendible architecture is A. Modular design of a software application that facilitates the integration of new modules B. Showing a universal law or rule to be invalid by providing a counter example C. ... of attributes in a database table that refers to data in another table D. None of these

Last Answer : A. Modular design of a software application that facilitates the integration of new modules

The software ................. of a program or a computing system is the structure or structures of the system, which comprise software components, the externally visible properties of those components, and the relationships among them. (A) Design (B) Architecture (C) Process (D) Requirement

Description : The software ................. of a program or a computing system is the structure or structures of the system, which comprise software components, the externally visible properties of those components, and the relationships among them. (A) Design (B) Architecture (C) Process (D) Requirement

Last Answer : (B) Architecture

A variable is defined within a block in a body of a function. Which of the following are true? A) It is visible throughout the function. B) It is visible from the point of definition to the end of the program. C) It is visible from the point of definition to the end of the block. D) It is visible throughout the block.

Description : A variable is defined within a block in a body of a function. Which of the following are true? A) It is visible throughout the function. B) It is visible from the point of definition to the end ... visible from the point of definition to the end of the block. D) It is visible throughout the block.

Last Answer : D) It is visible throughout the block.

Given a grammar : S1→Sc, S→SA|A, A→aSb|ab, there is a rightmost derivation S1=>Sc =>SAC=>SaSbc. Thus, SaSbc is a right sentential form, and its handle is (A) SaS (B) be (C) Sbe (D) aSb

Description : Given a grammar : S1→Sc, S→SA|A, A→aSb|ab, there is a rightmost derivation S1=>Sc =>SAC=>SaSbc. Thus, SaSbc is a right sentential form, and its handle is (A) SaS (B) be (C) Sbe (D) aSb 

Last Answer : (D) aSb

Given the following statements : S1 : The subgraph-isomorphism problem takes two graphs G1 and G2 and asks whether G1 is a subgraph of G2. S2 : The set-partition problem takes as input a set S of numbers and asks whether the numbers can be partitioned into two sets A Image Which of the following is true ? (A) S1 is NP problem and S2 is P problem. (B) S1 is NP problem and S2 is NP problem. (C) S1 is P problem and S2 is P problem. (D) S1 is P problem and S2 is NP problem.

Description : Given the following statements :  S1 : The subgraph-isomorphism problem takes two graphs G1 and G2 and asks whether G1 is a subgraph of G2.  S2 : The set-partition problem takes as input a set S of numbers and ... S1 is P problem and S2 is P problem. (D) S1 is P problem and S2 is NP problem.

Last Answer : (B) S1 is NP problem and S2 is NP problem.

Which of the following statements is true? (1) The sentence S is a logical consequence of S1,..., Sn if and only if S1˄S2˄........˄Sn→S is satisfiable. (2) The sentence S is a logical consequence of S1,..., Sn if and only if S1˄S2˄........˄Sn→S is valid. (3) The sentence S is a logical consequence of S1,..., Sn if and only if S1˄S2˄........˄Sn˄¬S is consistent. (4) The sentence S is a logical consequence of S1,..., Sn if and only if S1˄S2˄........˄Sn˄S is inconsistent.

Description : Which of the following statements is true? (1) The sentence S is a logical consequence of S1,..., Sn if and only if S1˄S2˄........˄Sn→S is satisfiable. (2) The sentence S is a logical consequence of ... S is a logical consequence of S1,..., Sn if and only if S1˄S2˄........˄Sn˄S is inconsistent.

Last Answer : The sentence S is a logical consequence of S1,..., Sn if and only if S1˄S2˄........˄Sn→S is valid.

Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following statement is true? (1) Both S1 and S2 are conflict serializable. (2) S1 is conflict serializable and S2 is not conflict serializable. (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Description : Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following ... . (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Last Answer : S1 is not conflict serializable and S2 is conflict serializable.

A recursive function h, is defined as follows: h(m)=k, if m=0 = 1, if m=1 = 2h(m-1) + 4h(m-2), if m≥2 If the value of h(4) is 88 then the value of k is: (1) 0 (2) 1 (3) 2 (4) -1

Description : A recursive function h, is defined as follows: h(m)=k, if m=0  = 1, if m=1 = 2h(m-1) + 4h(m-2), if m≥2 If the value of h(4) is 88 then the value of k is: (1) 0 (2) 1 (3) 2 (4) -1

Last Answer : (3) 2 

State true or false for Java Program. i) Data members of an interface are by default final ii) An abstract class has implementations of all methods defined inside it. A) i-false, ii-false B) i-false, ii-true C) i-true, ii-false D) i-true, ii-true

Description : State true or false for Java Program. i) Data members of an interface are by default final ii) An abstract class has implementations of all methods defined inside it. A) i-false, ii-false B) i-false, ii-true C) i-true, ii-false D) i-true, ii-true

Last Answer : C) i-true, ii-false

When a program class implements an interface, it must provide behavior for A) two methods defined in that interface B) any methods in a class C) only certain methods in that interface D) all methods defined in that interface

Description : When a program class implements an interface, it must provide behavior for A) two methods defined in that interface B) any methods in a class C) only certain methods in that interface D) all methods defined in that interface

Last Answer : D) all methods defined in that interface

Extensive property of a system is one whose value  (a) depends on the mass of the system like volume  (b) does not depend on the mass of the system, like temperature, pressure, etc.  (c) is not dependent on the path followed but on the state  (d) is dependent on the path followed and not on the state  (e) is always constant.

Description : Extensive property of a system is one whose value  (a) depends on the mass of the system like volume  (b) does not depend on the mass of the system, like temperature, pressure, etc.  (c) is not ... the state  (d) is dependent on the path followed and not on the state  (e) is always constant.

Last Answer : Answer : a

Intensive property of a system is one whose value  (a) depends on the mass of the system, like volume  (b) does not depend on the mass of the system, like temperature, pressure, etc.  (c) is not dependent on the path followed but on the state  (d) is dependent on the path followed and not on the state  (e) remains constant.

Description : Intensive property of a system is one whose value  (a) depends on the mass of the system, like volume  (b) does not depend on the mass of the system, like temperature, pressure, etc.  (c) is not ... on the state  (d) is dependent on the path followed and not on the state  (e) remains constant.

Last Answer : Answer : b

Semi-join strategies are techniques for query processing in distributed database system. Which of the following is a semi-join technique? (A) Only the joining attributes are sent from one site to another and then all of the rows are returned. (B) All of the attributes are sent from one site to another and then only the required rows are returned. (C) Only the joining attributes are sent from one site to another and then only the required rows are returned. (D) All of the attributes are sent from one site to another and then only the required rows are returned.

Description : Semi-join strategies are techniques for query processing in distributed database system. Which of the following is a semi-join technique? (A) Only the joining attributes are sent from one site to ... the attributes are sent from one site to another and then only the required rows are returned.

Last Answer : (C) Only the joining attributes are sent from one site to another and then only the required rows are returned.

A .................... architecture assigns only a few essential functions to the kernel, including address spaces, Inter process communication(IPC) and basic scheduling. A) Monolithic kernel B) Micro kernel C) Macro kernel D) Mini kernel

Description : A .................... architecture assigns only a few essential functions to the kernel, including address spaces, Inter process communication(IPC) and basic scheduling. A) Monolithic kernel B) Micro kernel C) Macro kernel D) Mini kernel

Last Answer : B) Micro kernel

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks ... only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

Architecture of the database can be viewed as (A) two levels. (B) four levels. (C) three levels. (D) one level.

Description : Architecture of the database can be viewed as (A) two levels. (B) four levels. (C) three levels. (D) one level.

Last Answer : (C) three levels

Which one of the following non-functional quality attributes is not highly affected by the architecture of the software ? (A) Performance (B) Reliability (C) Usability (D) Portability

Description : Which one of the following non-functional quality attributes is not highly affected by the architecture of the software ? (A) Performance (B) Reliability (C) Usability (D) Portability

Last Answer : (C) Usability

When a function is defined inside a class, this function is called …………. A) Inside function B) Class function C) Inline function D) Interior function

Description : When a function is defined inside a class, this function is called …………. A) Inside function B) Class function C) Inline function D) Interior function

Last Answer : C) Inline function

Which of the following is incorrect? a) A Layered-style program is divided into an array of modules or layers b) Each layer provides services to the layer “below” and makes use of services provided by the layer “above” c) All of the mentioned d) None of the mentioned

Description : Which of the following is incorrect? a) A Layered-style program is divided into an array of modules or layers b) Each layer provides services to the layer “below” and makes use of services provided by the layer “above” c) All of the mentioned d) None of the mentioned

Last Answer : Each layer provides services to the layer “below” and makes use of services provided by the layer “above”

A thread is usually defined as a light weight process because an Operating System (OS) maintains smaller data structure for a thread than for a process. In relation to this, which of the following statement is correct? (A) OS maintains only scheduling and accounting information for each thread. (B) OS maintains only CPU registers for each thread. (C) OS does not maintain a separate stack for each thread. (D) OS does not maintain virtual memory state for each thread.

Description : A thread is usually defined as a light weight process because an Operating System (OS) maintains smaller data structure for a thread than for a process. In relation to this, which of the following ... separate stack for each thread. (D) OS does not maintain virtual memory state for each thread.

Last Answer : (B) OS maintains only CPU registers for each thread.

The height of h(A) of a fuzzy set A is defined as h(A) = sup A(x) xϵA Then the fuzzy set A is called normal when (A) h(A) = 0 (B) h(A) < 0 (C) h(A) = 1 (D) h(A) < 1

Description : The height of h(A) of a fuzzy set A is defined as h(A) = sup A(x)  xϵA Then the fuzzy set A is called normal when (A) h(A) = 0 (B) h(A) < 0 (C) h(A) = 1 (D) h(A) < 1

Last Answer : (C) h(A) = 1 

Let f and g be the functions from the set of integers to the set integers defined by f(x) = 2x + 3 and g(x) = 3x + 2 Then the composition of f and g and g and f is given as (A) 6x + 7, 6x + 11 (B) 6x + 11, 6x + 7 (C) 5x + 5, 5x + 5 (D) None of the above

Description : Let f and g be the functions from the set of integers to the set integers defined by f(x) = 2x + 3 and g(x) = 3x + 2 Then the composition of f and g and g and f is given as (A) 6x + 7, 6x + 11 (B) 6x + 11, 6x + 7 (C) 5x + 5, 5x + 5 (D) None of the above

Last Answer : (A) 6x + 7, 6x + 11 Explanation: fog(x)=f(g(x))=f(3x+2)=2(3x+2)+3=6x+7 gof(x)=g(f(x))=g(2x+3)=3(2x+3)+2=6x+11

Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, 70, 80} (C) {(20, 0.1), (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Description : Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, ... , (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Last Answer : (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB(x))) Then, f(A+B) is equal to (A) {(0.5,12), (0.6,13), (1,14), (0.7,15), (0.7,16), (1,17), (1,18)} (B) {(0.5,12), (0.6,13), (1,14), (1,15), (1,16), (1,17), (1,18)} (C) {(0.3,12), (0.5,13), (0.5,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Description : Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB( ... ,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Last Answer : (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} 

Let R and S be two fuzzy relations defined as: Image Then, the resulting relation, T, which relates elements of universe x to elements of universe z using max-min composition is given by

Description : Let R and S be two fuzzy relations defined as: Then, the resulting relation, T, which relates elements of universe x to elements of universe z using max-min composition is given by

Last Answer : Answer: C

Consider a sequence F00 defined as: Image Then what shall be the set of values of the sequence F00? (1) (1, 110, 1200) (2) (1, 110, 600, 1200) (3) (1, 2, 55, 110, 600, 1200) (4) (1, 55, 110, 600, 1200)

Description : Consider a sequence F00 defined as: Then what shall be the set of values of the sequence F00? (1) (1, 110, 1200) (2) (1, 110, 600, 1200) (3) (1, 2, 55, 110, 600, 1200) (4) (1, 55, 110, 600, 1200)

Last Answer : Answer: 1 Explanation: We have given, F00(0) = 1, F00(1) = 1 F00(2) = (10*F00(1) + 100)/F00(0) = 110 F00(3) = (10*F00(2) + 100)/F00(1) = 1200 F00(4) = (10*F00(3) + ... (2) = 110 Since the values repeats after the first three values, the set of values of F00 will be (1,110,1200).