In a fully connected mesh network with n devices, there are ................ physical channels to link all devices. (A) n(n–1)/2 (B) n(n+1)/2 (C) 2n (D) 2n+1

In a fully connected mesh network with n devices, there are ................ physical channels to link all devices. (A) n(n–1)/2 (B) n(n+1)/2 (C) 2n (D) 2n+1
by

1 Answer

Answer :

(A) n(n–1)/2
by

Related questions

In a fully-connected mesh network with 10 computers, total .............. number of cables are required and ................ number of ports are required for each device. (A) 40, 9 (B) 45, 10 (C) 45, 9 (D) 50, 10

Description : In a fully-connected mesh network with 10 computers, total .............. number of cables are required and ................ number of ports are required for each device. (A) 40, 9 (B) 45, 10 (C) 45, 9 (D) 50, 10

Last Answer : (C) 45, 9

In a ................topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Description : In a ................topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : A) Mesh

In a topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Description : In a topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : A) Mesh

In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Description : In a................ topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : Mesh

................... comparisons are necessary in the worst case to find both the maximum and minimum of n numbers. (A) 2n-2 (B) n + floor(lg n) - 2 (C) floor(3n/2) - 2 (D) 2 lg n – 2

Description : ................... comparisons are necessary in the worst case to find both the maximum and minimum of n numbers. (A) 2n-2 (B) n + floor(lg n) - 2 (C) floor(3n/2) - 2 (D) 2 lg n – 2

Last Answer : (C) floor(3n/2) - 2

A full binary tree with n leaves contains (A) n nodes (B) log2 n nodes (C) 2n –1 nodes (D) 2n nodes

Description : A full binary tree with n leaves contains (A) n nodes (B) log2 n nodes (C) 2n –1 nodes (D) 2n nodes

Last Answer : (C) 2n –1 nodes 

Network with point-to-point link is known as (A) Fully Connected Network (B) Half Connected Network (C) Duplex Connected Network (D) None of these

Description : Network with point-to-point link is known as (A) Fully Connected Network (B) Half Connected Network (C) Duplex Connected Network (D) None of these

Last Answer : (A) Fully Connected Network

....... was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Description : ....... was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. A) Star LAN B) Ring LAN C) Mesh LAN D) All of the above

Last Answer : A) Star LAN

What is the name of the network topology in which there are bi-directional links between each possible node? A) Ring B) Star C) Tree D) Mesh

Description : What is the name of the network topology in which there are bi-directional links between each possible node? A) Ring B) Star C) Tree D) Mesh

Last Answer : D) Mesh

In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Description : In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Last Answer : D) A and B

Which layer of OSI reference model is responsible for decomposition of messages and generation of sequence numbers to ensure correct re-composition from end to end of the network? (A) Physical (B) Data-link (C) Transport (D) Application

Description : Which layer of OSI reference model is responsible for decomposition of messages and generation of sequence numbers to ensure correct re-composition from end to end of the network? (A) Physical (B) Data-link (C) Transport (D) Application

Last Answer : (C) Transport 

Which layers of the OSI reference model are host-to-host layers ? (A) Transport, Session, Presentation, Application (B) Network, Transport, Session, Presentation (C) Data-link, Network, Transport, Session (D) Physical, Data-link, Network, Transport

Description : Which layers of the OSI reference model are host-to-host layers ? (A) Transport, Session, Presentation, Application (B) Network, Transport, Session, Presentation (C) Data-link, Network, Transport, Session (D) Physical, Data-link, Network, Transport

Last Answer : (A) Transport, Session, Presentation, Application

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps. 

What are number of cable links required for the 4 devices connected in mesh topology? a. 3 b.4 c. 6 d.1

Description : What are number of cable links required for the 4 devices connected in mesh topology? a. 3 b.4 c. 6 d.1

Last Answer : c. 6

Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a physical layer device, and a switch is a data link layer device. C. A hub causes larger collision domains. D. Hubs are more sophisticated versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

Network components are connected to the same cable in the _____ topology. 1) Star 2) Ring 3) Bus 4) Mesh 5) Mixed

Description : Network components are connected to the same cable in the _____ topology. 1) Star 2) Ring 3) Bus 4) Mesh 5) Mixed

Last Answer : Answer :2

If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

A simple cabling method, known as the ……………… topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Description : A simple cabling method, known as the ……………… topology allows about 30 computers on a maximum cable length of about 600 feet. A) Ring B) Bus C) Star D) Mesh

Last Answer : B) Bus

In mesh topology, relationship between one device and another is .............. A) Primary to peer B) Peer to primary C) Primary to secondary D) Peer to Peer

Description : In mesh topology, relationship between one device and another is .............. A) Primary to peer B) Peer to primary C) Primary to secondary D) Peer to Peer

Last Answer : D) Peer to Peer

The ............layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Description : The ............layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Description : The layer one of the OSI model is A) Physical layer B) Link layer C) Router layer D) Broadcast layer

Last Answer : A) Physical layer

The ............ layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Description : The ............ layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Last Answer : A) Physical

Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Description : Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Last Answer : D) Gateway

Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session

Description : Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session

Last Answer : B) Application

Which of the following is not a part of the characteristic of 4G network? a) Multirate management b) Fully converged services c) Software dependency d) Diverse user devices

Description : Which of the following is not a part of the characteristic of 4G network? a) Multirate management b) Fully converged services c) Software dependency d) Diverse user devices

Last Answer : a) Multirate management

This is a global collection of high-powered computer that are connected together with cables, telephone lines, microwave dishes, satellites etc. A) Arpanet B) Internet C) Network

Description : This is a global collection of high-powered computer that are connected together with cables, telephone lines, microwave dishes, satellites etc. A) Arpanet B) Internet C) Network

Last Answer : B) Internet

How many edges must be removed to produce the spanning forest of a graph with N vertices, M edges and C connected components? (A) M+N-C (B) M-N-C (C) M-N+C (D) M+N+C

Description : How many edges must be removed to produce the spanning forest of a graph with N vertices, M edges and C connected components? (A) M+N-C (B) M-N-C (C) M-N+C (D) M+N+C

Last Answer : (C) M-N+C

A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Description : A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Last Answer : (B) 8

Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg(w) ≥ n for every v and w not connected by an edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Description : Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg( ... edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Last Answer : (D) (a), (b) and (c)

The number of point to point links required in a fully connected network for 50 entities is (A) 1250 (B) 1225 (C) 2500 (D) 50

Description : The number of point to point links required in a fully connected network for 50 entities is (A) 1250 (B) 1225 (C) 2500 (D) 50

Last Answer : Ans: (C)

The................. layer is responsible for resolving access to the shared media or resources. A) Physical B) Mac sub layer C) Network D) Transport

Description : The................. layer is responsible for resolving access to the shared media or resources. A) Physical B) Mac sub layer C) Network D) Transport

Last Answer : B) Mac sub layer

The ……………… layer is responsible for resolving access to the shared media or resources. A) Physical B) Mac sub layer C) Network D) Transpor

Description : The ……………… layer is responsible for resolving access to the shared media or resources. A) Physical B) Mac sub layer C) Network D) Transpor

Last Answer : B) Mac sub layer

………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : D) Internet Control Message Protocol (ICMP)

Encryption and Decryption is the responsibility of ............... Layer. (A) Physical (B) Network (C) Application (D) Datalink

Description : Encryption and Decryption is the responsibility of ............... Layer. (A) Physical (B) Network (C) Application (D) Datalink

Last Answer : (C) Application

In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Description : In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Last Answer : Answer: Marks to all

A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Description : A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Last Answer : (C) 400 kbps

In how many ways can the string A ∩ B - A ∩ B - A be fully parenthesized to yield an infix expression? (A) 15 (B) 14 (C) 13 (D) 12

Description : In how many ways can the string A ∩ B - A ∩ B - A be fully parenthesized to yield an infix expression? (A) 15 (B) 14 (C) 13 (D) 12

Last Answer : (B) 14

Devices may bearrangedin a _____ topology. A) mesh B) ring C) bus D) all of theabove

Description : Devices may bearrangedin a _____ topology. A) mesh B) ring C) bus D) all of theabove

Last Answer : all of theabove

The _____layer defines the electrical and physical specifications for devices: a) Data Link Layer b) Presentation Layer c) Physical Layer d) None of These

Description : The _____layer defines the electrical and physical specifications for devices: a) Data Link Layer b) Presentation Layer c) Physical Layer d) None of These

Last Answer : c) Physical Layer

The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Description : The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Last Answer : b. presentation

Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Description : Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Last Answer : A. TCP/IP 

How is Mesh Topology connected ?

Description : How is Mesh Topology connected ?

Last Answer : In the case of mesh topology, each computer in the network is directly connected to another computer.

What is the number of wires connected in Mesh Topology with 6 nodes ?

Description : What is the number of wires connected in Mesh Topology with 6 nodes ?

Last Answer : : The number of wires connected in Mesh topology with 6 nodes will be 26.

A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Description : A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Last Answer : circuit-switched

The degree of the Bezier curve with n control points is a.n + 1 b.n - 1 c.n d.2n

Description : The degree of the Bezier curve with n control points is a.n + 1 b.n - 1 c.n d.2n

Last Answer : a.n + 1

In the third system of pulleys, if there are n number of pulleys then the velocity ratio of the system will be a.2n - 2 b.n c.107 dynes d.2n-1 e.2n

Description : In the third system of pulleys, if there are n number of pulleys then the velocity ratio of the system will be a.2n - 2 b.n c.107 dynes d.2n-1 e.2n

Last Answer : d. 2n-1

A framed structure is perfect if it contains members equal to a.n - 3 b.2n - 3 c.2n - 2 d.n - 2 e.2n - 1

Description : A framed structure is perfect if it contains members equal to a.n - 3 b.2n - 3 c.2n - 2 d.n - 2 e.2n - 1

Last Answer : b. 2n - 3

find the value of n in the equation 6.2n – 3.7n = 85 + 45. -General Knowledge

Description : find the value of n in the equation 6.2n – 3.7n = 85 + 45. -General Knowledge

Last Answer : 6.2n - 3.7n = 85 + 45; 2.5n = 130; n = 130/2.5; n = 52

If (log x)/(l + m - 2n) = (log y)/(m + n - 2l) = (log z)/(n + l - 2m), then xyz is equal to : -Maths 9th

Description : If (log x)/(l + m - 2n) = (log y)/(m + n - 2l) = (log z)/(n + l - 2m), then xyz is equal to : -Maths 9th

Last Answer : Let l+m−2nlogx​=m+n−2llogy​=n+l−2mlogz​=k(say) So, we get logx=k(l+m−2n) ....... (i) logy=k(m+n−2l) ....... (ii) logz=k(n+l−2m) ....... (iii) ∴logx+logy+logz=k(l+m−2n)+k(m+n−2l)+k(n+l−2m) ⇒logx+logy+logz=kl+km−2kn+km+kn−2kl+kn+kl−2km ⇒log(xyz)=0 ⇒logxyz=log1 ⇒xyz=1