A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels.
A)
line-switched
B)
frame-switched
C)
circuit-switched
D)
none of the above

1 Answer

Answer :

circuit-switched

Related questions

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

Description : A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switched c. None of the Given d. frame-switched

Last Answer : a. virtual-circuit

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

Description : Packet-switched networks can alsobe divided into ______subcategories: virtual-circuit networks and datagram networks A) four B) three C) two D) five

Last Answer : two

Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PVC

Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Last Answer : the physical and data link layers

Description : The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

Description : BSNL land line telephone network is an example of a network. A. Packet switched B. Circuit switched C. Bit switched D. Line switched

Last Answer : B. Circuit switched

Description : A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched

Last Answer : b) Circuit switched

Description : The required resources for communication between end systems are reserved for theduration of the session between end systems in method. a. Packet switched b. Bit switched c. Line switched d. Circuit switched

Last Answer : d. Circuit switched

Description : A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched

Last Answer : b. Circuit switched

Description : There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people ... And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Last Answer : First think who will operate each bulb, obviously person #2 will do all the even numbers, and say person #10 will operate all the bulbs that end in a zero. So who would operate for example bulb 48: Persons numbered: 1 & 48 ... 100 (1, 4, 9, 16, 25, 36, 49, 64, 81 & 100) hence 10 bulbs remain on.

Description : A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Last Answer : circuit-switched

Description : The network layer in the Internet isdesigned as a __________network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : datagram

Description : In a ________ network, twotypes of addressing are involved: global and local. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : virtual-circuit

Description : A switched WAN is normally implemented as a _______ network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : virtual-circuit

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

Description : The network layer in the Internet is designed as anetwork. a. datagram b. none c. virtual-circuit d. circuit-switched

Last Answer : a. datagram

Description : Differentiate switched virtual circuit and Permanent virtual circuit.

Last Answer : Switched virtual circuit format is comparable conceptually to dial-up line in circuit switching. In this method, a virtual circuit is created whenever it is needed and exits only for the duration of ... provided between two uses on a continuous basis. The circuit is dedicated to the specific uses.

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Description : Positive control of induction is best described as a control system in which an operon functions (A) Unless it is switched off by a derepressed repressor protein (B) Only after a repressor protein is ... on (D) Only after an inducer protein, which is activated by an inducer, switch it on

Last Answer : Answer : D

Description : What are number of cable links required for the 4 devices connected in mesh topology? a. 3 b.4 c. 6 d.1

Last Answer : c. 6

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Description : Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Last Answer : c. Both a & b

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Description : The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Last Answer : B. Data Link Layer

Description : The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Last Answer : B. Data Link Layer

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

Description : Switched to Chrome on my Laptop - can't see links and stuff in my Yahoo email - help?

Last Answer : Probably because its’ Google Chrome.

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Description : The physical layer translates logical communication requests from the ______ into hardware specific operations. a. data link layer b. network layer c. trasnport layer d. application layer

Last Answer : a. data link layer

Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Last Answer : A. Data Link

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Last Answer : A. network layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

Description : In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Last Answer : link local

Description : In a ______ connection, twoand only two devicesare connected bya dedicated link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Last Answer : point-to-point

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

Description : In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

Description : In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

Description : In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching