# What is a supernode?

What is a supernode?

106 views

supernode

## Related Questions

Can a supernode contain a resistor?

Nodal Analysis with Voltage Sources dependent voltage source and two supernode
Last Answer : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Nodal analysis example with voltage source and supernode
Last Answer : Nodal analysis example with voltage source and supernode

If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is
Last Answer : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Find current through resistor using nodal analysis
Last Answer : Find current through resistor using nodal analysis

Nodal analysis problem two current source
Last Answer : Nodal analysis problem two current source

Nodal analysis problem
Last Answer : Nodal analysis problem

What is branch?
Last Answer : A path which connects two node is called branch.

What is node?
Last Answer : A point in a circuit where two or more circuit elements are joined it is called node.

What is active and passive network?
Last Answer : Active network is a network which contain one or more than one EMF source. An active network consists of an active element like battery or transistor. Passive network is a ... contain any source of energy. Passive network consists of passive element like resistance, inductance and capacitance.

In the circuit shown below, the current through the inductor is,
Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Last Answer : What do you mean by parameter?! In the Z-transform we find zeros and poles of a system,so we can find the revergence area of a system

A tree of a network graph consists of (A) (n-1) nodes (B) n branches (C) one or two nodes left in isolated position (D) no closed paths
Last Answer : The dual of a tree is sometimes called a maze Itconsists of spaces connected by links in the same way that the tree consists of nodes connected by treebranches. Duals cannot be formed for every graph. ... Consequently, only planar graphs have duals.

To neglect a voltage source, the terminals across the source are _____
Last Answer : To neglect a voltage source, the terminals across the source are short circuited

To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: (1) is 4 A (2) is 4 A or less (3) is less than 4 A (4) May be 4 A or less or more than 4 A
Last Answer : To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: is less than 4 A

An R-L series AC circuit has R = 10 ohm and XL = 10 ohm. It is connected to an AC voltage source, the phase angle between voltage and current is (a) 30° (b) 45° (c) 60° (d) 36.8°

In an RLC series AC circuit, if frequency is below the resonant frequency, then (a) XC = XL (b) XC < XL (c) XC > XL (d) None of these

Two two-port networks are connected in cascade. The combination is to be represented as a single two-port network. The parameters of the network are obtained by multiplying the individual a. z-parameter matrix b. h-parameter matrix c. y-parameter matrix d. ABCD-parameter matrix

In a graph, the number of independent loops is 6 and the number of independent cut sets is 5, The total number of branches in the graph is A) 9 B) 12 C) 10 D) 11
Last Answer : In a graph, the number of independent loops is 6 and the number of independent cut sets is 5, The total number of branches in the graph is 11

A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively
Last Answer : A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively +4V and-7V

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage
Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage

Two incandescent light bulbs of 40 Wand 60 W rating are connected in series across the mains, then .  A) The bulbs together consume 100 W B) The bulbs together consume 50 W C) The 60 W bulb glows brighter D) The 40 W bulb glows brighter
Last Answer : Two incandescent light bulbs of 40 Wand 60 W rating are connected in series across the mains, then . The bulbs together consume 50 W

A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions  A) It is possible for the current to be oscillatory B) The voltage across the resistor at t ... The energy stored in the inductor in the steady state is zero D) Theresistor current eventually falls to zero

A passive two port network is in a steady state. Compared to its input, the steady state output can never offer  A) Higher voltage B) Lower impedance C) Greater power D) Better regulation
Last Answer : A passive two port network is in a steady state. Compared to its input, the steady state output can never offer Greater power

Consider the star network shown in figure. The resistance between terminals A and B with C open is 6 ohms, between terminals B and C withAopen is 11 ohms and between terminals C andAwith B open is 9 ohms. Then RA, RB, RC respectively is
Last Answer : Consider the star network shown in figure. The resistance between terminals A and B with C open is 6 ohms, between terminals B and C withAopen is 11 ohms and between terminals C andAwith B open is 9 ohms. Then RA, RB, RC respectively is  2, 4,7

The switch in the circuit has been closed for a long time. It is opened at t = 0. At t = 0+, the current through the 1 micro farad capacitor is A) 0A B) 1A C) 1.25A D) 5A
Last Answer : The switch in the circuit has been closed for a long time. It is opened at t = 0. At t = 0+, the current through the 1 micro farad capacitor is 1A

As shown in the figure, 1 ohm resistance is connected across a source that has a load line v + i = 100. The current through the resistance is A) 25 A B) 50 A C) 100 A D) 200A
Last Answer : As shown in the figure, 1 ohm resistance is connected across a source that has a load line v + i = 100. The current through the resistance is 50 A

The number of chords in the graph of the given circuit will be
Last Answer : The number of chords in the graph of the given circuit will be 3

The time constant for the  given circuit is A) 1/9 S B) 1/4 S C) 4S D) 9S
Last Answer : The time constant for the given circuit is 4S

As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are   (A) will become half (B) will ... (D) cannot be determined unless the circuit configuration and the values of the resistors are known.
Last Answer : As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are will become double

Consider the following statement for a 2-port network  1. Z11 =Z22  2. h12 = h21  3.Y12 = -Y21 4.BC - AD = -1   then the network is reciprocal if and only if   (A) 1 and 2 are correct (B) 2 and 3 are correct (C) 3 and 4 are correct (D) 4 alone is correct.
Last Answer : Consider the following statement for a 2-port network  1. Z11 =Z22  2. h12 = h21  3.Y12 = -Y21 4.BC - AD = -1   then the network is reciprocal if and only if   (A) 1 and 2 are correct (B) 2 and 3 are correct (C) 3 and 4 are correct (D) 4 alone is correct.

When the graph of a network has six branches with three tree branches then the minimum number of equations required for the solution of the network is   (A) 2 (B) 3 (C) 4 (D) 5
Last Answer : When the graph of a network has six branches with three tree branches then the minimum number of equations required for the solution of the network is 3

With n nodes and b branches a network will have   (A) (b+n) links (B) b - n +1 links (C) b -n-1 links (D) b + n + 1 links
Last Answer : With n nodes and b branches a network will have  b - n +1 links

A transmission line is terminated at its characteristic impedance. The reflection coefficient is  (a) 1 (b) –1 (c) 0 (d) ∞
Last Answer : A transmission line is terminated at its characteristic impedance. The reflection coefficient is  0

In a series RLC circuit operating below the resonant frequency the current  (a) I leads Vs (b) I lags Vs (c) I is in Phase with Vs (d) None of these
Last Answer : In a series RLC circuit operating below the resonant frequency the current  I leads Vs

Norton's equivalent of a circuit consists of a  1. Constant current generator with parallel impedance  2. Constant current generator in series with an infinite resistance  3. Constant current generator in parallel with high impedance  4. Constant current generator in series with low impedance
Last Answer : Norton's equivalent of a circuit consists of a Constant current generator with parallel impedance

In application of superposition theorem, one is required to solve as many circuits as there are  1. Nodes 2. Branches 3. Meshes 4. Sources
Last Answer : In application of superposition theorem, one is required to solve as many circuits as there are Sources

A passive 2-port network is in a steady state, compared to its input, the steady state output can never offer   (a) Higher voltage (b) Lower impedance (c) Greater power (d) Better regulation
Last Answer : A passive 2-port network is in a steady state, compared to its input, the steady state output can never offer Greater power

Which of the following theorems can be applied to any network linear or non-linear, active or passive, time variant or time invariant?   (a) Thevenin Theorem (b) Norton Theorem (c) Telligen Theorem (d) Superposition Theorem
Last Answer : Which of the following theorems can be applied to any network linear or non-linear, active or passive, time variant or time invariant? (a) Thevenin Theorem (b) Norton Theorem (c) Telligen Theorem (d) Superposition Theorem

If the number of branches in a network is 'B', the number of nodes is 'N' and the number of dependent loops is 'L', then the number of independent node equations will be  (a) N+L–1 (b) B–1 (c) B–N (d) N–1

In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to
Last Answer : In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

Millman's theorem yields equivalent  (1) Impedance or Resistance (3) Voltage source (2) Current source (4) Voltage or Current source
Last Answer : Millman's theorem yields equivalent Voltage or Current source

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?
Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the
Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

The number of independent loops for a network with n nodes and b branches is
Last Answer : The number of independent loops for a network with n nodes and b branches is b-n+1

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will
Last Answer : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will not change

The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be
Last Answer : The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be simple and and lie on the negative axis in the s -plane