Is 0.67 bigger than 0.8?

Is 0.67 bigger than 0.8?
by

1 Answer

Answer :

No because 0.8 is bigger than 0.67
by

Related questions

Which is bigger 0.67 or 0.8?

Description : Which is bigger 0.67 or 0.8?

Last Answer : Add a zero to .8 to make it .80. Then it becomes obvious that .80 is greater than .67.

What is greater 0.8 or 0.67?

Description : What is greater 0.8 or 0.67?

Last Answer : 0.8 is greater.

The thermal radiative flux from a surface of emissivity = 0.4 is 22.68 kW/m2 . The approximate surface temperature (K) is (Stefan-Boltzmann constant = 5.67 × 10 -8 W/m2 .K4 )(A) 1000(B) 727(C) 800(D) 1200

Description : The thermal radiative flux from a surface of emissivity = 0.4 is 22.68 kW/m2 . The approximate surface temperature (K) is (Stefan-Boltzmann constant = 5.67 × 10 -8 W/m2 .K4 ) (A) 1000 (B) 727 (C) 800 (D) 1200

Last Answer : (A) 1000

Fill in the blank with the most appropriate option. The Universal Constant of Gravitation is _______. (1) 6.67 x 10¹⁰ Nm²/kg (2) 6.76 x 10⁻¹⁰ Nm²/kg² (3) 6.67 x 10⁻¹¹ Nm²/kg² (4) 9.8 Nm²/kg²

Description : Fill in the blank with the most appropriate option. The Universal Constant of Gravitation is _______. (1) 6.67 x 10¹⁰ Nm²/kg (2) 6.76 x 10⁻¹⁰ Nm²/kg² (3) 6.67 x 10⁻¹¹ Nm²/kg² (4) 9.8 Nm²/kg²

Last Answer : (3) 6.67 x 10⁻¹¹ Nm²/kg² Explanation: The gravitational constant (also known as the universal gravitational constant), is an empirical physical constant involved in the calculation of ... Isaac Newton's law of universal gravitation and in Albert Einstein's general theory of relativity.

A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 Hz B 4.67 Hz C 9.8 Hz D 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 Hz B 4.67 Hz C 9.8 Hz D 2.49 Hz

Last Answer : D 2.49 Hz

A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 HzB 4.67 Hz C 9.8 Hz D 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. Determine the natural frequency of the car in vertical direction. A 5 HzB 4.67 Hz C 9.8 Hz D 2.49 Hz

Last Answer : D 2.49 Hz

A car having a mass of 1000 kg deflects its springs 4 cm under its load. D Determine the natural frequency of the car in vertical direction. (A)5 Hz (B) 4.67 Hz (C) 9.8 Hz (D) 2.49 Hz

Description : A car having a mass of 1000 kg deflects its springs 4 cm under its load. D Determine the natural frequency of the car in vertical direction. (A)5 Hz (B) 4.67 Hz (C) 9.8 Hz (D) 2.49 Hz

Last Answer : (D) 2.49 Hz

The angular separation between the vectors A = 4i + 3j + 5k and B = i – 2j + 2k is (in degrees) a) 65.8 b) 66.8 c) 67.8 d) 68.8

Description : The angular separation between the vectors A = 4i + 3j + 5k and B = i – 2j + 2k is (in degrees) a) 65.8 b) 66.8 c) 67.8 d) 68.8

Last Answer : c) 67.8

An identified source of irrigation water has ion concentrations of Na+ , Ca++ and Mg++ as 20, 10 and 8 milliequivalents per litre, respectively. The SAR of this water is approximately : a) 2.06 b) 6.67 c) 2.67 d) zero

Description : An identified source of irrigation water has ion concentrations of Na+ , Ca++ and Mg++ as 20, 10 and 8 milliequivalents per litre, respectively. The SAR of this water is approximately : a) 2.06 b) 6.67 c) 2.67 d) zero

Last Answer : b) 6.67

. A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Description : . A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour  cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Last Answer : (a) Rs 8.25

Is 0.67 greater than 0.534?

Description : Is 0.67 greater than 0.534?

Last Answer : Yes, 0.67 is greater than 0.5334

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Description : A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Last Answer : e. 0.67

`C(s)+O_(2)(g)rarr CO_(2)(g)+94.0` K cal. `CO(g)+(1)/(2)O_(2)(g)rarr CO_(2)(g), Delta H=-67.7` K cal. From the above reactions find how much heat (Kca

Description : `C(s)+O_(2)(g)rarr CO_(2)(g)+94.0` K cal. `CO(g)+(1)/(2)O_(2)(g)rarr CO_(2)(g), Delta H=-67.7` K cal. From the above reactions find how much heat (Kca

Last Answer : `C(s)+O_(2)(g)rarr CO_(2)(g)+94.0` K cal. `CO(g)+(1)/(2)O_(2)(g)rarr CO_(2)(g), Delta H=-67.7` K cal. ... g)` A. `20.6` B. `26.3` C. `44.2` D. `161.6`

What is the slope between 0-3 and -67?

Description : What is the slope between 0-3 and -67?

Last Answer : If you mean points of (0, -3) and (-6, 7) then the slope is-5/3

How is the decimal 0.67 written as a fraction?

Description : How is the decimal 0.67 written as a fraction?

Last Answer : 67/100 is the only solution. The number 67 is prime.

Redox potential (EO volts) of NAD+/NADH is (A) –0.67 (B) –0.32 (C) –0.12 (D) +0.03

Description : Redox potential (EO volts) of NAD+/NADH is (A) –0.67 (B) –0.32 (C) –0.12 (D) +0.03

Last Answer : Answer : B

An electrical component is connected across a 120 volt 60 hertz AC supply. What is the current drawn by the component if the impedance is 200 ohms? A. 0.01 amperes B. 0.60 amperes C. 1.67 amperes D. 100 amperes

Description : An electrical component is connected across a 120 volt 60 hertz AC supply. What is the current drawn by the component if the impedance is 200 ohms? A. 0.01 amperes B. 0.60 amperes C. 1.67 amperes D. 100 amperes

Last Answer : Answer: B

If the velocity of propagation in a certain medium is 200x106 m/s, what is its refractive index? A. 1.3 B. 1.5 C. 1.27 D. 0.67

Description : If the velocity of propagation in a certain medium is 200x106 m/s, what is its refractive index? A. 1.3 B. 1.5 C. 1.27 D. 0.67

Last Answer : B. 1.5

Calculate the electric field intensity of a line charge of length 2m and potential 24V. a) 24 b) 12 c) 0.083 d) 12.67

Description : Calculate the electric field intensity of a line charge of length 2m and potential 24V. a) 24 b) 12 c) 0.083 d) 12.67

Last Answer : b) 12

Compute the conductivity when the current density is 12 units and the electric field is 20 units. Also identify the nature of the material. a) 1.67, dielectric b) 1.67, conductor c) 0.6, dielectric d) 0.6, conductor

Description : Compute the conductivity when the current density is 12 units and the electric field is 20 units. Also identify the nature of the material. a) 1.67, dielectric b) 1.67, conductor c) 0.6, dielectric d) 0.6, conductor

Last Answer : c) 0.6, dielectric

Calculate the convection current when electron density of 200 units is travelling at a speed of 12m/s. a) 16.67 b) 2400 c) 2880 d) 0.0

Description : Calculate the convection current when electron density of 200 units is travelling at a speed of 12m/s. a) 16.67 b) 2400 c) 2880 d) 0.0

Last Answer : b) 2400

What is the ratio of the velocity at the axis of the pipe to the mean velocity of flow in case of pipe flow under viscous condition? (A) 0.5 (B) 0.67 (C) 1 (D) 2

Description : What is the ratio of the velocity at the axis of the pipe to the mean velocity of flow in case of pipe flow under viscous condition? (A) 0.5 (B) 0.67 (C) 1 (D) 2

Last Answer : (D) 2

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

Given, 3H2 + CO = CH4 + H2O, KP = 10 1.84 and, 4H2 + CO2 = CH4 + 2H2O, KP = 10 1.17 the KP for the reaction CO + H2O = CO2 + H2 is (A) 10 3.01 (B) 10 -0.67 (C) 10 -3.01 (D) 10 0.67

Description : Given, 3H2 + CO = CH4 + H2O, KP = 10 1.84 and, 4H2 + CO2 = CH4 + 2H2O, KP = 10 1.17 the KP for the reaction CO + H2O = CO2 + H2 is (A) 10 3.01 (B) 10 -0.67 (C) 10 -3.01 (D) 10 0.67

Last Answer : (D) 10 0.67

If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Description : If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Last Answer : (C) D = 0.97 to 1.22 Q

The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to(A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Description : The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to (A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Last Answer : (B) 1.5 m

If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Last Answer : Answer: Option D

The discharge through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Description : The discharge through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Last Answer : Answer: Option D

The velocity through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Description : The velocity through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Last Answer : Answer: Option C

The design yield stress of steel according to IS: 4561978 is: (A) 0.37 fy (B) 0.57 fy (C) 0.67 fy (D) 0.87 fy Where fy is the characteristic yield strength of steel

Description : The design yield stress of steel according to IS: 4561978 is: (A) 0.37 fy (B) 0.57 fy (C) 0.67 fy (D) 0.87 fy Where fy is the characteristic yield strength of steel

Last Answer : Answer: Option D

The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Description : The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Last Answer : (A) 0.4

How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Description : How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Last Answer : 0.67 m

The Maximum strength attained in concrete in limit state design is generally taken as [ A ] fck [ B ] 0.67 fck [ C ] 0.45 fck [ D ] 0.30 fck

Description : The Maximum strength attained in concrete in limit state design is generally taken as [ A ] fck [ B ] 0.67 fck [ C ] 0.45 fck [ D ] 0.30 fck

Last Answer : [ C ] 0.45 fck

The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Description : The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Last Answer : [ C ] 0.67

The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Description : The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75

Last Answer : [ C ] 0.67

What is the value of Three-Year 4.25% Annual Coupon Bond Puttable at Par one year from now if one year forward rates at T (0), T (1) and T (2) are 2.50%, 3% and 4.5% respectively? a) 101.54 b) 101.71 c) 102.67 d) 102.89

Description : What is the value of Three-Year 4.25% Annual Coupon Bond Puttable at Par one year from now if one year forward rates at T (0), T (1) and T (2) are 2.50%, 3% and 4.5% respectively? a) 101.54 b) 101.71 c) 102.67 d) 102.89

Last Answer : c) 102.67

The depth of 19.81 mlong service girder is about……… a)1.67 m b)1.16 m* c)0.95 m d)1.52 m

Description : The depth of 19.81 mlong service girder is about……… a)1.67 m b)1.16 m* c)0.95 m d)1.52 m

Last Answer : b)1.16 m*

Equal volumes of two monoatomic gases, A and B, at same temperature and pressure are mixed. The ratio of specific heats (Cp /Cv ) of the mixture will be (1) 1.67 (2) 0.83 (3) 1.50 (4) 3.3

Description : Equal volumes of two monoatomic gases, A and B, at same temperature and pressure are mixed. The ratio of specific heats (Cp /Cv ) of the mixture will be (1) 1.67 (2) 0.83 (3) 1.50 (4) 3.3

Last Answer : (1) 1.67

Consider a disk queue with request for input/output to block on cylinders 98, 183, 37, 122, 14, 124, 65, 67 in that order. Assume that disk head is initially positioned at cylinder 53 and moving towards cylinder number 0. The total number of head movements using Shortest Seek Time First (SSTF) and SCAN algorithms are respectively (A) 236 and 252 cylinders (B) 640 and 236 cylinders (C) 235 and 640 cylinders (D) 235 and 252 cylinders

Description : Consider a disk queue with request for input/output to block on cylinders  98, 183, 37, 122, 14, 124, 65, 67  in that order. Assume that disk head is initially positioned at cylinder 53 and moving ... and 252 cylinders (B) 640 and 236 cylinders (C) 235 and 640 cylinders (D) 235 and 252 cylinders

Last Answer : Answer: 236 and 208 cylinders Explanation: SSTF Initial head position =53 The closest queue to initial head position=65 head moves from 53 to 65=12 head moves from 65 to 67=2 head moves from 67 ... 122=24 head moves from 122 to 124=2 head moves from 124 to 183=59 Total head movement=208 

Is 4.8 km bigger than 4800 m?

Description : Is 4.8 km bigger than 4800 m?

Last Answer : Feel Free to Answer

Is 8 pints bigger or smaller than 96 fluid ounces?

Description : Is 8 pints bigger or smaller than 96 fluid ounces?

Last Answer : Eight pints would be more voluminous, because there are 16 fluidounces in a pint and 16 X 8 = 128.

Is 8 pints bigger or smaller than 96 fluid ounces?

Description : Is 8 pints bigger or smaller than 96 fluid ounces?

Last Answer : Eight pints would be more voluminous, because there are 16 fluidounces in a pint and 16 X 8 = 128.

Is 11.80 bigger than 11.8?

Description : Is 11.80 bigger than 11.8?

Last Answer : No, they are the same.Trailing zeros AFTER a decimal point make no difference to anumber.11.8 + no hundredths = 11.8 + 0/100 = 11.8 + 0.00 = 11.80

The average speed of a bus in the upward journey is 50% more than that in the return journey. The bus halts for 2 hrs on reaching the destination. The total time taken for the complete to and from trip is 34 hrs covering a distance of 1600 km. the speed of the bus in the upward journey is. a) 63.24 b) 65.67 c) 63.49 d) 62.49

Description : The average speed of a bus in the upward journey is 50% more than that in the return journey. The bus halts for 2 hrs on reaching the destination. The total time taken for the complete to and from trip is 34 hrs ... speed of the bus in the upward journey is. a) 63.24 b) 65.67 c) 63.49 d) 62.49

Last Answer : D Let the speed in return journey be x km/hr Then speed in upward journey = 150 /100 x = (3/2 x)km/hr Average speed = (2*3x/2*x) / (3x/2 +x) =3x2 / (5x/2) =6x2 / 5x =6x/5 km/hr Therefore (1600 ... 192x = 8000 X = 41.66 Speed in upward journey = (3/2 x ) km/hr =(3/2*41.66) =62.49 km/hr 

what is bigger 1 7/12 or 1 5/8?

Description : what is bigger 1 7/12 or 1 5/8?

Last Answer : 10001/999900

What is bigger 8 ft or 1 yd?

Description : What is bigger 8 ft or 1 yd?

Last Answer : 8 ft is bigger.

What is bigger 30 oz or 8 kg?

Description : What is bigger 30 oz or 8 kg?

Last Answer : gkg

Why has Shaker Heights not grown intellectually in allowing section 8 renters in Do you thing it is only making you targets for a bigger problem.?

Description : Why has Shaker Heights not grown intellectually in allowing section 8 renters in Do you thing it is only making you targets for a bigger problem.?

Last Answer : You need to take that dog to a vet! A collapsing tracha isn't something you can treat with allergy medication!