How do you make porous hair healthy after bleaching?

How do you make porous hair healthy after bleaching?
by

1 Answer

Answer :

Your hair, after it appears from your skin, is dead material. There is nothing you can do to "nourish it" or repair it. All products that say they will do something to repair or nourish your hair are lying. However adding fabric conditioner or an oil (which will stick to the outside of your hair) may make it more manageable.
by

Related questions

How long before I can dye my hair after bleaching?

Description : How long before I can dye my hair after bleaching?

Last Answer : Always wait at least one day. If you dye your hair the same day you bleach it, your hair will break off at the weakest points. I would think the ideal situation at least, this is what I would do when I was still dyeing my hair would be to wait two or three days and then dye it.

To restore SOME color, can you dye your hair without stripping/bleaching it first?

Description : To restore SOME color, can you dye your hair without stripping/bleaching it first?

Last Answer : I don’t know your skill in doing it yourself, but some color could be streaked, no need to bleach.

Can applying coconut oil before bleaching my hair prevent less damage?

Description : Can applying coconut oil before bleaching my hair prevent less damage?

Last Answer : answer:My mother was a hairstylist for several years and her rule of thumb for coloring hair was always that the hair should be as clean as possible before applying chemicals. However, I did some poking around and ... and go to sleep. 3. Bleach hair as usual the next day with oil still in the hair.

So if I have dark hair, is there a way to highlight it without first bleaching it?

Description : So if I have dark hair, is there a way to highlight it without first bleaching it?

Last Answer : A red might show up. I’m not sure how dark your hair is now. If you are buying your own dye, many of the boxes have on the side or back of the box how the color will look on brown or dark brown hair for instance. I am naturally a medium-darkish brown, and I have no problem dying my hair red shades.

Can I dye my hair with out bleaching it?

Description : Can I dye my hair with out bleaching it?

Last Answer : answer:If you want a bright colour and your natural colour is dark, the dye will likely just give you highlights or a shade that's only noticeable in the sun. My hair is naturally a very dark brown ... 're of a different ethnicity than your friend, her hair might be more apt to colour than yours is.

Is there a way I can dye my hair a brighter red without bleaching it before coloring it?

Description : Is there a way I can dye my hair a brighter red without bleaching it before coloring it?

Last Answer : What color is your hair, naturally?

Question on bleaching dyed black hair?

Description : Question on bleaching dyed black hair?

Last Answer : answer:Whatever you do, be careful not to over process it, this will strip it of color and moisture :( I would wait a while to get your hair back to its healthiest state before dying it again.

Bleaching black hair?

Description : Bleaching black hair?

Last Answer : Yes. I dyed my hair black and then stripped it to re-dye it red. I made a mess, turning my roots white and my tips became orange. I highly recommend salon treatment.

Bleaching blonde hair

Description : Does anyone have experience with Balea More blond lightening hair spray? I bought it, used it and it was recognizable. I have honey-blond hair, it was almost brown, and after that spray, it caught me in a ... a long time and after 2 weeks they start to darken me again, not so much, but they start.

Last Answer : 8-) I don't use I'm blond by nature .... in the summer a little more does the sun skin when tanning pulls out pigment ... so I have even lighter hair ...: D so I use the sun sleeps no need ....: D the radiolucent ☠ ☣ ☠ ☣ ☠ ☣ ☠ the radiolucent

Is using a hair frosting kit gentler on the hair then using a bleaching kit?

Description : Is using a hair frosting kit gentler on the hair then using a bleaching kit?

Last Answer : Much, since you aren't stripping out the proteins in your hair.

will extensive hair bleaching get rid of cocaine out of the cortex of hair?

Description : will extensive hair bleaching get rid of cocaine out of the cortex of hair?

Last Answer : no, nothing will

Pheretima posthuma is highly useful as (a) their burrows make the soil loose (b) they make the soil porous, leave their castings and take organic debris in the soil (c) they are used as fish meal (d) they kill the birds due to biomagnification of chlorinated hydrocarbons.

Description : Pheretima posthuma is highly useful as (a) their burrows make the soil loose (b) they make the soil porous, leave their castings and take organic debris in the soil (c) they are used as fish meal (d) they kill the birds due to biomagnification of chlorinated hydrocarbons.

Last Answer : (b) they make the soil porous, leave their castings and take organic debris in the soil

Glazing is used to make earthenware (A) Hard (B) Soft (C) Porous (D) Impervious

Description : Glazing is used to make earthenware (A) Hard (B) Soft (C) Porous (D) Impervious

Last Answer : Answer: Option D

A tank internally measuring 150 cm × 120 cm × 100 cm has 1281600 cm^3 of water in it. Porous bricks are placed in the water until the tank -Maths 9th

Description : A tank internally measuring 150 cm × 120 cm × 100 cm has 1281600 cm^3 of water in it. Porous bricks are placed in the water until the tank -Maths 9th

Last Answer : Volume of a brick = 20 cm 6 cm 4 cm = 480 cm3. Water absorbed by one brick = (110 480)(110 480) cm3 = 48 cm3. Let x bricks be placed in the water. Then, x bricks absorb 48x cm3 of water. ... tank ⇒ 1281600 + 480xx - 48xx = 150 x 120 x 100 ⇒ 432xx = 1800000 - 1281600 = 518400 ⇒ xx = 1200.

Gravity settling tanks/porous filters are used to remove particles larger than

Description : Gravity settling tanks/porous filters are used to remove particles larger than

Last Answer : Gravity settling tanks/porous filters are used to remove particles larger than A. `2 mum ` B. `50 mum` C. `20 mum` D. `10 mum`

Diffuse porous woods are characterstic of plants growing in

Description : Diffuse porous woods are characterstic of plants growing in

Last Answer : Diffuse porous woods are characterstic of plants growing in A. Alpine region B. Cold winter regions C. Temperate regions D. Tropical regions

How was Alexander able to turn porous elephants into kind of a weapon?

Description : How was Alexander able to turn porous elephants into kind of a weapon?

Last Answer : Feel Free to Answer

Canal irrigation la moat Important in north India because the (a) soil is porous (b) level of underground water is high (c) sources of the canals are the perennial rivers (d) regions is densely populated

Description : Canal irrigation la moat Important in north India because the (a) soil is porous (b) level of underground water is high (c) sources of the canals are the perennial rivers (d) regions is densely populated

Last Answer : Ans: (c)

Which of the following statements regarding red soils of India is/are correct? 1. The colour of the soil is-red due to ferric oxide content. 2. Red soils are rich in lime, humous and potash. 3. They are porous and have friable structure. Select the correct answer using the code given below: [(OS2011] (a) 1 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Description : Which of the following statements regarding red soils of India is/are correct? 1. The colour of the soil is-red due to ferric oxide content. 2. Red soils are rich in lime, humous and potash. 3. They are porous and have friable ... OS2011] (a) 1 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Last Answer : Ans: (b)

Canal irrigation is most important in the Northern Plains of India because: (a) the soil is porous (b) the level of underground water is high (c) the sources of canals are perennial rivers (d) the region is densely populated

Description : Canal irrigation is most important in the Northern Plains of India because: (a) the soil is porous (b) the level of underground water is high (c) the sources of canals are perennial rivers (d) the region is densely populated

Last Answer : Ans: (c)

Match the following: A. Bhabar 1. Younger alluvium B. Terai 2. It is very porous C. Bhangar 3. Has thick forest and wild life D. Khadar 4. Older alluvium A B C D (a) 2 3 4 1 (b) 1 2 3 4 (c) 4 3 2 1 (d) 4 3 1 2

Description : Match the following: A. Bhabar 1. Younger alluvium B. Terai 2. It is very porous C. Bhangar 3. Has thick forest and wild life D. Khadar 4. Older alluvium A B C D (a) 2 3 4 1 (b) 1 2 3 4 (c) 4 3 2 1 (d) 4 3 1 2

Last Answer : Ans: (a)

In the illustration, the component labeled 'G' is ______. EL-0031 A. hard rubber, plastic or bituminous composition B. porous inside to absorb excess positive ions C. precharged for (-) and (+) in manufacturing D. All the above

Description : In the illustration, the component labeled 'G' is ______. EL-0031 A. hard rubber, plastic or bituminous composition B. porous inside to absorb excess positive ions C. precharged for (-) and (+) in manufacturing D. All the above

Last Answer : Answer: A

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

Which of the following is NOT a porous absorber? A. Prefabricated tiles B. Plasters and spray on materials C. Acoustic blankets D. Membrane absorber

Description : Which of the following is NOT a porous absorber? A. Prefabricated tiles B. Plasters and spray on materials C. Acoustic blankets D. Membrane absorber

Last Answer : D. Membrane absorber

What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Description : What absorber in which efficient absorption is only possible over a very narrow band approaching 1.0 (total absorption)? A. Porous material B. Helmholtz resonator C. Panel Absorber D. Membrane absorber

Last Answer : B. Helmholtz resonator

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Description : Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Last Answer : (C) Synthetic zeolites crystals/metal alumino-silicates

The process of making clay products non-porous and shining is called

Description : The process of making clay products non-porous and shining is called

Last Answer : glazing.

Sedimentary rocks are-----? A. Porous (Answer) B. Hard C. Rough D. Brittle E. Volcanic

Description : Sedimentary rocks are-----? A. Porous (Answer) B. Hard C. Rough D. Brittle E. Volcanic

Last Answer : A. Porous (Answer)

Which of the following are included in the finishing operations for porous bearing? [IES-2005] 1. Infiltration 2.Sizing 3.Heat treatment 4.Coining Select the using the code given below: (a) 1 and 2 (b) 2 and 3 (c) 2 and 4 (d) 1 and 4

Description : Which of the following are included in the finishing operations for porous bearing? [IES-2005] 1. Infiltration 2.Sizing 3.Heat treatment 4.Coining Select the using the code given below: (a) 1 and 2 (b) 2 and 3 (c) 2 and 4 (d) 1 and 4

Last Answer : (a) 1 and 2

During the formation of bread it becomes porous due to release of CO2 by the action of (a) yeast (b) bacteria (c) virus (d) protozoans.

Description : During the formation of bread it becomes porous due to release of CO2 by the action of (a) yeast (b) bacteria (c) virus (d) protozoans.

Last Answer : (a) yeast

Out of diffuse porous and ring porous woods, which is correct? (a) Ring porous wood carries more water for short period. (b) Diffuse porous wood carries more water. (c) Ring porous wood carries more water when need is higher. (d) Diffuse porous wood is less specialised but conducts water rapidly throughout.

Description : Out of diffuse porous and ring porous woods, which is correct? (a) Ring porous wood carries more water for short period. (b) Diffuse porous wood carries more water. (c) Ring porous wood ... when need is higher. (d) Diffuse porous wood is less specialised but conducts water rapidly throughout.

Last Answer : (c) Ring porous wood carries more water when need is higher.

Diffuse porous woods are characteristic of plants growing in (a) alpine region (b) cold winter regions (c) temperature climate (d) tropics.

Description : Diffuse porous woods are characteristic of plants growing in (a) alpine region (b) cold winter regions (c) temperature climate (d) tropics.

Last Answer : (d) tropics.

Which one occurs in echinodermata? (a) Bilateral symmetry (b) Radial symmetry (c) Porous body (d) Soft skin

Description : Which one occurs in echinodermata? (a) Bilateral symmetry (b) Radial symmetry (c) Porous body (d) Soft skin

Last Answer : (b) Radial symmetry

The formation of canal system in sponges is due to (a) folding of inner walls (b) gastro-vascular system (c) reproduction (d) porous walls.

Description : The formation of canal system in sponges is due to (a) folding of inner walls (b) gastro-vascular system (c) reproduction (d) porous walls.

Last Answer : (d) porous walls.

Low temperature oxidation of coal is accelerated by the (A) Storage in large heaps (B) Storage in compressed piles (C) Absence of porous or friable particles (D) All (A), (B) and (C)

Description : Low temperature oxidation of coal is accelerated by the (A) Storage in large heaps (B) Storage in compressed piles (C) Absence of porous or friable particles (D) All (A), (B) and (C)

Last Answer : (A) Storage in large heaps

Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Description : Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For a first order chemical reaction in a porous catalyst, the Thiele modulus is 10. The effectiveness factor is approximately equal to (A) 0 (B) 1 (C) 0.1 (D) 0.5

Description : For a first order chemical reaction in a porous catalyst, the Thiele modulus is 10. The effectiveness factor is approximately equal to (A) 0 (B) 1 (C) 0.1 (D) 0.5

Last Answer : (C) 0.1

A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the process is limited by (A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Description : A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the ... A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Last Answer : (A) Diffusion within the pellet

BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Description : BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Last Answer : (A) Specific surface of a porous catalyst

A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg (B) ke ff = (k+ kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Description : A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg ( ... + kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Last Answer : (D) 1/ke ff = 1/k + 1/kg

For a first order isothermal chemical reaction in a porous catalyst, the effectiveness factor is 0.3. The effectiveness factor will increase if the (A) Catalyst size is reduced or the catalyst diffusivity is reduced (B) Catalyst size is reduced or the catalyst diffusivity is increased (C) Catalyst size is increased or the catalyst diffusivity is reduced(D) Catalyst size is increased or the catalyst diffusivity is increased

Description : For a first order isothermal chemical reaction in a porous catalyst, the effectiveness factor is 0.3. The effectiveness factor will increase if the (A) Catalyst size is reduced or the ... the catalyst diffusivity is reduced (D) Catalyst size is increased or the catalyst diffusivity is increased

Last Answer : (B) Catalyst size is reduced or the catalyst diffusivity is increased

. B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Description : . B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Last Answer : (C) Surface area

Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates is not used to derive BET equation? (A) Langmuir's assumption applies to every adsorbed layer (B) There is no dynamic equilibrium between successive layer (C) The adsorbed layer may be polymolecular in thickness and the heat of adsorption in each layer (except the first one) is involved in each of the evaporation process (D) None of these

Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these

Last Answer : (B) There is no dynamic equilibrium between successive layer

Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Description : Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Last Answer : (D) None of these

Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier

Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil(B) Sintering of porous catalyst(C) Hydrogen embrittlement(D) All (A), (B) and (C)

Description : Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil (B) Sintering of porous catalyst (C) Hydrogen embrittlement (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Shales are (A) Porous (B) Permeable (C) Porous and permeable (D) Porous but not permeable

Description : Shales are  (A) Porous  (B) Permeable  (C) Porous and permeable  (D) Porous but not permeable

Last Answer : (D) Porous but not permeable

An earth formation which, although porous and capable of absorbing water does not provide an appreciable supply to wells, is known as (A) Aquifer (B) Aquiclude (C) Aquifuge (D) None of these

Description : An earth formation which, although porous and capable of absorbing water does not provide an  appreciable supply to wells, is known as  (A) Aquifer  (B) Aquiclude  (C) Aquifuge  (D) None of these 

Last Answer : (B) Aquiclude