Molecular sieves are porous
(A) Alumina
(B) Silica
(C) Synthetic zeolites crystals/metal alumino-silicates
(D) None of these

1 Answer

Answer :

(C) Synthetic zeolites crystals/metal alumino-silicates

Related questions

Description : Molecular sieves are regenerated by heating to __________ °C. (A) < 150 (B) 200-330 (C) > 500 (D) > 1000

Last Answer : (B) 200-330

Description : Asbestos (A) Is a natural fibrous mineral substance (B) Is composed of hydrous silicates of calcium and magnesium (CaSiO3, 3MgSiO3) (C) Contains iron oxide and alumina (D) All the above

Last Answer : Answer: Option D

Description : The heavier silicates named ‘Sima’ or silica + magnesium are most abundant in which layer?

Last Answer : Crust

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

Description : Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Last Answer : (D) High alumina & high magnesia

Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Last Answer : (D) Activated carbon

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Description : Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Last Answer : (B) Reduction in hardness, silica & alumina in feed water

Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Last Answer : (B) Limestone powder or alkalised alumina

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

Description : The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Last Answer : (C) 20% oleum

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Description : Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda

Last Answer : (A) Lead oxide

Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Last Answer : Option C

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Description : Permanent hardness of water, due to sulphates of the metal, can be destroyed by the use of (1) Nitrates (2) Zeolites (3) Sulphonates (4) None of these

Last Answer : (2) Zeolites Explanation: Zeolites are crystalline solids structures made of silicon, aluminum and oxygen that form a framework with cavities and channels inside where cations, water and/or small molecules may reside.

Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : C

Description : Quartz is a crystalline form of - (1) Alumina (2) Glass (3) Silica (4) Limestone

Last Answer : (3) Silica Explanation: Quartz is made up of a continuous framework of SiO4 silicon-oxygen tetrahedra, with each oxygen being shared between two tetrahedra, giving an overall formula SiO2. Tridymite ... is a denser polymorph of quartz found in some meteorite impact sites and in metamorphic rocks.

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

Description : The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Last Answer : Answer: Option D

Description : The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina

Last Answer : Answer: Option D

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Description : The percentage of alumina and silica in good fire clay vary respectively is (A) 25, 75 (B) 30, 70 (C) 35, 65 (D) All of these

Last Answer : Answer: Option A

Description : The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Last Answer : Answer: Option A

Description : Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia

Last Answer : Answer: Option B

Description : Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Last Answer : Answer: Option B

Description : Slate (A) Is a metamorphic rock (B) Splits into thin sheets along its bedding planes (C) Has a smooth surface and contains alumina and silica (D) Possesses good water absorption capacity

Last Answer : Answer: Option A

Description : Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Last Answer : Ethylene glycol

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

Description : The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Last Answer : (a) 63:22:6:3

Description : The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Last Answer : (c) Lime

Description : Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Last Answer : [ A ] Alkalies

Description : White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Last Answer : [ D ] Iron oxide

Description : Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Last Answer : a) Alumina*

Description : The main ingredients of Portland cement are a) Lime and silica* b) Lime and Alumina c) Alumina magnesia d) Silica and Alumina

Last Answer : a) Lime and silica*

Description : Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Last Answer : b) Silica*

Description : Quartz is a crystalline form of (1) Alumina (2) Glass (3) Silica (4) Limestone

Last Answer : Silica

Description : Covalent network crystals have-------? A. higher melting point then molecular crystals (Answer) B. lower melting point then molecular crystals C. discrete molecules linked by Van der waals forces D. hydrogen bonding

Last Answer : A. higher melting point then molecular crystals (Answer)

Description : Zeolite removes both temporary as well as permanent hardness of water by precipitating calcium and magnesium present in water as insoluble zeolites. Used zeolite is regenerated by flushing with the solution of (A) Calcium sulphate (B) Sodium chloride (C) Sodium sulphate (D) Magnesium chloride

Last Answer : (B) Sodium chloride

Description : Permanent hardness of water can be removed by (A) Addition of soda ash to it (B) Treating it with zeolites (C) Passing it through sodium hexametaphosphate (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Description : What is alumina? Write its molecular formula.

Last Answer : Alumina is chemically hydrated oxide of aluminium. Its formula is Al2O3.2H2O.