Write two application of metal cladding process.

Write two application of metal cladding process.
by

1 Answer

Answer :

Applications : 1) Al clad sheets used in aircraft industry in which a plate of duralumin is sandwiched between two layers of 99.5% pure Al. 2) Cu clad steel wire is obtained by forcing steel rod into closely fitted cu-tube is used for electrical conductors possessing combining strength of steel with the high conductivity of Cu.
by

Related questions

Why metal cladding is done on plane surfaces only?

Description : Why metal cladding is done on plane surfaces only?

Last Answer : The process of metal cladding involves bonding firmly and permanently, a dense homogenous layer of a coating metal to the base metal on one or both sides. In this process base metal is sandwiched or ... cell action in presence of moisture. Hence the metal cladding can be done only on plain surfaces.

Describe metal spraying process for protection of metal from corrosion .Write its two applications.

Description : Describe metal spraying process for protection of metal from corrosion .Write its two applications.

Last Answer : Process:- i) In this method, coating metal sprayed on the surface of base metal with the help of spraying gun or pistol. ii) The spraying gun consist of a duct for compressed air and is fitted with the oxy- ... 4) Coating of metals like Al, Zn, Ni, Sn, Pb etc. is made by the method of spraying.

Give the composition of rose metal and its one application.

Description : Give the composition of rose metal and its one application.

Last Answer : Composition: Bi = 50%  Pb = 28%  Sn = 22% Applications:- 1.It is used for making fire alarms. 2.It is used in electrical fuse wires. 3.It is used for casting for dental works. 4.It is used in automatic sprinkler system.

Write two applications and two properties of Rose metal.

Description : Write two applications and two properties of Rose metal.

Last Answer : Properties: 1. It is easily fusible alloy. 2. It’s melting point is 89 0C. Applications: 1. It is used for making fire – alarms, fuses wires. 2. It is used for casting dental works 3. It is used in automatic sprinkler system.

Write the mechanism of corrosion of metal due to action of oxygen.

Description : Write the mechanism of corrosion of metal due to action of oxygen.

Last Answer : Mechanism: Metallic surfaces when exposed to air undergo oxidation and the process of corrosion is represented by the equation.   A thin oxide layer is formed on the metal surface and the nature of this film decides further action depending upon the film so produced.   

Write the different types of oxide films formed on the metal surface. Explain the oxide film which is more protective against corrosion.

Description : Write the different types of oxide films formed on the metal surface. Explain the oxide film which is more protective against corrosion.

Last Answer : Types of oxide films 1. Stable porous oxide film 2. Stable non porous oxide film 3. Unstable oxide film 4. Volatile oxide film i) Stable nonporous oxide film ii) Unstable oxide films are protective ... . Example: - Such type of oxide film is formed in the metals like Ag, Au, and Pt.

Write the action of Conc. HNO3 on Aluminium metal.

Description : Write the action of Conc. HNO3 on Aluminium metal.

Last Answer : Aluminum metal does not react with dilute as well as concentrated Nitric acid.

Describe the tinning process. Write its two applications.

Description : Describe the tinning process. Write its two applications.

Last Answer : Tinning: -The process of covering iron or steel sheets with a thin coat of tin to prevent it from rusting is called as tinning.   Process: i) The sheet of steel to be ... Tinned copper sheets are used for cooking utensils and refrigeration equipment. Cu tubes are used in refrigeration. 

Write two points of similarity between sherardizing and galvanising process.

Description : Write two points of similarity between sherardizing and galvanising process.

Last Answer : 1) Sherardizing and galvanizing are the processes of avoiding corrosion of metal. 2) Zinc is used as coating metal on iron base metal.

Give any four application of electrically conducting polymers

Description : Give any four application of electrically conducting polymers

Last Answer : 1 They are used in rechargeable batteries 2 They are used as analytical sensors to detect pH, O2 ,NO2, SO2, NH3, glucose etc 3. They are used as antistatic materials in offices, theatres ... wall papers, light emitting diodes &data storage. 7. They are used in construction of photo voltaic cell

State the composition of Rose metal.

Description : State the composition of Rose metal.

Last Answer : Composition: Bi = 50%  Pb = 28%  Sn = 22%

Write two properties and two uses of Bakelite.

Description : Write two properties and two uses of Bakelite.

Last Answer : Properties Uses Hard,Rigid,strong,scratch resistant & brittle material. insulation of electrical wires & cables electrical switches, switch board sockets, plugs for ... Rolling mills, Decorative laminates wall covering & industrial laminates for electrical parts. 

Write two characteristics and two uses of Ni-Cd battery.

Description : Write two characteristics and two uses of Ni-Cd battery.

Last Answer : Characteristics: 1. The e.m.f. of cell is 1.4 V when fully charged. 2. It has low internal resistance & longer life span (5 years). 3. It is expensive in cost. 4. It can be ... lighting and air conditioning because of its long life & low maintenance cost. 3. It is widely used in calculators.

Write two applications of copper.

Description : Write two applications of copper.

Last Answer : 1) For making electrical wires, cables and conducting apparatus. 2) As a coinage metal and in ornaments, jewelry for making them hard. 3) For making water stills, kettles, vacuum pans, steam pipes ... such as hypsometers, colorimeters, etc. 7) For making alloys like brass, bronze, gun metal, etc.

Define adhesive. Write two characteristics of Adhesive.

Description : Define adhesive. Write two characteristics of Adhesive.

Last Answer : Adhesives- Any substance which is capable of holding the materials together by surface attachment is called as an adhesive Characteristics:-  i) Adhesive should form rigid, strong and durable bond. ii ... the adhesion property on storage. v) It should be resistant to heat, chemicals and water.  

Write any two applications of silicon fluid.

Description : Write any two applications of silicon fluid. 

Last Answer : Applications:- 1) As a lubricant: excellent lubrication for plastic and elastomeric surfaces. 2)In polishes and chemical specialities: It is used in automobile and furniture polishes due to its high ... ,non-toxic , non-carbonizing moulds release for rubber, plastics and metal die castings. 

Write any two examples of sacrificial anodic protection.

Description : Write any two examples of sacrificial anodic protection.

Last Answer : Examples: 1) To protect buried water or gas pipelines. 2) To protect buried cables. 3) To protect hot water tank, etc. 4) Mg or Zn rods are bolted along the sides of ship, hot water ... protect open water box coolers. 6) To protect water tanks. 7) To protect transmission line towers, etc. 

Write any two advantages of Adhesives.

Description : Write any two advantages of Adhesives.

Last Answer : i) Adhesives have an advantage of joining material such as glass & metal, metal metal, metal & plastic, plastics-plastic, ceramic & ceramic. ii) Surfaces are easily & rapidly attached to each ... are leak proof for gases & liquids. So adhesive bonding is used in preparing water tight wood boats

Write two applications of Teflon

Description : Write two applications of Teflon

Last Answer : Applications of Teflon: i) Teflon used as capacitor dielectrics & insulating material for all kinds of windings. ii) Heat resistant materials are prepared by combining Teflon with glass cloth. iii ... . vii) Teflon coating is applied on vehicle to protect them from corrosion and scratches. 

Write two applications of aluminum

Description : Write two applications of aluminum

Last Answer : 1) For preparing utensils, surgical instruments, heating appliances, parts of aeroplanes, containers for chemical industry etc. 2) For making electric wires and cables for transmission lines. 3) ... storing nitric acid. 13) As refractory for lining of furnace and for making refractory bricks.

Write the action of Nitric acid on Aluminium.

Description : Write the action of Nitric acid on Aluminium.

Last Answer : Aluminium metal does not react with dilute as well as concentrated Nitric acid 

Define specific conductance. Write its unit.

Description : Define specific conductance. Write its unit.

Last Answer : Specific conductance is the conductance offered by 1 cm3 of the substance or 1ml solution.  OR The conductance offered by a solution or a conducting material having unit length & unit area of cross ... conductance. Unit of specific conductance: ohm-1 cm-1 or mhos-cm-1 or S.cm-1

Write the action of water on Aluminium.

Description : Write the action of water on Aluminium.

Last Answer : Pure aluminium is not affected by pure water. However, impure aluminium is readily corroded by water containing salts (seawater). It decomposes boiling water with evolution of hydrogen.

Write any four uses of aluminium.

Description : Write any four uses of aluminium.

Last Answer : 1) For preparing utensils, surgical instruments, heating appliances, parts of aeroplanes, containers for chemical industry etc. 2) For making electric wires and cables for transmission lines. 3) ... furnace and for making refractory bricks. 14) For preparation of mirrors for telescope

Write the properties and applications of epoxy resin.

Description : Write the properties and applications of epoxy resin.

Last Answer : Properties: i) They have good chemical resistance. ii) They have low shrinkage during curing. iii) They possess good electrical resistance. iv) These compounds can be used in solid and ... to their electrical resistance they are widely used in making insulators, bushings etc. for high voltage. 

Write four characteristics of good paint.

Description : Write four characteristics of good paint.

Last Answer : i) It should be able to resist the atmospheric conditions. ii) It should have desired consistency. iii) It should have high hiding power. iv) Its film should be washable. v) Its film ... adherent, durable and glossy film.  vii) When paint is applied on a metal, it should resist corrosion.

Define atmospheric corrosion. Write mechanism of atmospheric corrosion with diagram.

Description : Define atmospheric corrosion. Write mechanism of atmospheric corrosion with diagram.

Last Answer : Atmospheric corrosion: This type of corrosion occurs when metal surface comes in immediate contact directly with atmospheric gases like O2, Cl2, Br2, I2, H2S, CO2, SO2, NO2 etc.

Define the term equivalent conductance. Write its unit

Description : Define the term equivalent conductance. Write its unit

Last Answer : Equivalent conductance (λv): It is the conductance of the solution containing 1 gm equivalent of solute / electrolyte when placed between two sufficiently large electrodes 1 cm apart. Unit: ohm-1 cm2 / equivalent OR mhos.cm2 /equivalent 

Write four properties and four applications of urea formaldehyde resin.

Description : Write four properties and four applications of urea formaldehyde resin.

Last Answer : Properties: 1) The bond film produced by Urea - Formaldehyde resin is quite rigid & transparent. 2) It is good resistant to moisture, insects & fungi. 3) However action of acids & alkalies ... 3) Used as bonding articles in aircraft. 4) Used as bonding articles in ship building industries etc.

Write the action of water on copper.

Description : Write the action of water on copper.

Last Answer : Water at ordinary temperature has no action on copper. If it is heated to white heat, steam gives Cupric oxide.

Define the term metallurgy. Name the process of extraction of Aluminium.

Description : Define the term metallurgy. Name the process of extraction of Aluminium. 

Last Answer : Metallurgy:-The process of extraction of metal from its ore economically & profitably is called as metallurgy. The process used for extraction of Aluminium metal is Bayer’s process, Electrolytic reduction of alumina, Electrolytic refining. 

What are applications of sherardizing process?

Description : What are applications of sherardizing process?

Last Answer : Applications:- i)Sherardizing is used especially for protecting small odd shaped steel articles like bolts, screws, nuts, threaded parts washers, valves, gauge, tools etc.against atmospheric corrosion. ... has crevices or depression and there is practically no change in the dimensions of articles.

Explain discharging and charging process of lead acid storage cell.

Description : Explain discharging and charging process of lead acid storage cell. 

Last Answer : Discharging: - While discharging chemical energy gets converted into electrical energy. At anode: - The lead electrode loses electrons, which flow through the wire.   Lead sulphate is precipited at ... are reversed by passing an external e.m.f. greater than 2 volts from a generator.  

Describe galvanizing process with suitable diagram.

Description : Describe galvanizing process with suitable diagram.

Last Answer : It is the process of coating iron or steel sheets with a thin coat of zinc to prevent it from rusting. Process: The iron or steel sheet to be galvanized is first cleaned with dilute ... rollers to remove excess zinc and in order to get uniform coating. Finally it is annealed at 6500C. 

Describe Bessemerisation process with the help of chemical reaction & diagram.

Description : Describe Bessemerisation process with the help of chemical reaction & diagram. 

Last Answer : After smelting the molten matte is then transferred to a Bessemer converter which is a pear shaped furnace made up of steel and internally lined with lime or magnesia. It is mounted on trunnions and can be ... surface of copper hence it is called as blister copper. It is 96 to 98% pure.  

Draw diagram and explain sherardizing process

Description : Draw diagram and explain sherardizing process

Last Answer : Process: i) The iron articles (bolts, screws, nails etc) to be coated are first cleaned and then packed with Zn dust and ZnO powder in a steel drum, which is provided with ... protecting small steel articles like bolts, screws, nuts, threaded parts, washers, valves, gauge, tools etc.

Describe Bessemerization process with neat labeled diagram

Description : Describe Bessemerization process with neat labeled diagram 

Last Answer : After smelting the molten matte is then transferred to a Bessemer converter which is a pear shaped furnace made up of steel and internally lined with lime or magnesia. It is mounted on trunnions and can ... on the surface of copper hence it is called as blister copper. It is 96 to 98% pure

Describe the process of purification of aluminium by electrolytic refining with the help of neat, labelled diagram.

Description : Describe the process of purification of aluminium by electrolytic refining with the help of neat, labelled diagram.

Last Answer : Process: 1) The electrolytic cell consists of an iron tank lined at the bottom with carbon, which serve as anode. A number of graphite rods serve as cathode. 2) The cell is filled with ... . Crude or impure Al is added to the bottom layer from time to time. The process is thus continued.

Describe smelting process with neat labeled diagram.

Description : Describe smelting process with neat labeled diagram.

Last Answer : Roasted copper ore is then mixed with coke & sand particles & then strongly heated at about 13500 C in a water jacketed blast furnace. At high temperature ferrous sulphide (FeS) is oxidised & ... of ferrous sulphide (FeS) is called as matte which is then removed from the lower outlet.

State the two methods of Hot dipping.

Description : State the two methods of Hot dipping. 

Last Answer : Two methods of hot dipping-1. Galvanizing 2. Tinning

State the two functions of pigment.

Description : State the two functions of pigment.

Last Answer : 1) Provide opacity and colour to paint film. 2) Give strength to the film. 3) Give protection to the paint film by reflecting harmful ultraviolet light. 4) Provide resistance to paint film against abrasion, ... and weather. 5) Give an aesthetical appeal (i.e pleasing to look at) to the paint film.

State two properties and two uses of silicone fluids.

Description : State two properties and two uses of silicone fluids.

Last Answer : Properties :- 1. They can be used in temperature range of -90 0C to 220 0C 2. They have excellent dielectric properties over a wide range of temperature 3. They have ... release material: an odourless, non-toxic, noncarbonizing moulds release for rubber, plastics and metal die castings.

State two applications of lead acid storage cell.

Description : State two applications of lead acid storage cell.

Last Answer : Applications of lead acid storage cell: 1. Lead acid storage cellis commonly used in automobiles. 2. To Supply current for electric vehicles 3. In Gas engine ignition 4. In telephone exchanges ... hospitals 7. In broad casting stations, power stations 8. For distribution work 9. In inverters

Define glass. Give its two characteristics.

Description : Define glass. Give its two characteristics.

Last Answer : Glass is amorphous material which is a mixture of silicates, phosphates, borates and other material with 50-80-% silica . Characteristics: 1) Glass is most widely used as an ... high electric constant. 5) Pyrex glass is most chemically stable and having excellent electrical properties.

Explain fuel cell. State two advantages.

Description : Explain fuel cell. State two advantages.

Last Answer : Fuel cell- Fuel cell is a electrochemical cell which converts the chemical energy of fuels directly into electrical energy by an electrochemical process in which the fuel is oxidized at the ... fossil fuels 15. Fuel cell automotive batteries can render electric vehicles efficient & refillable  

Define paint. Give its two properties

Description : Define paint. Give its two properties

Last Answer : Paint: - Paint is a mechanical dispersion mixture of one or more pigment in a vehicle. Properties of paint: 1) Paint imparts opacity and colour to the surface on which it is applied. 2) It ... and weather. 4) Paint imparts luster, gloss and durability to the surface on which it is applied.

Name two types of adhesives and give their uses.

Description : Name two types of adhesives and give their uses. 

Last Answer : Sr. No. Types of adhesives Uses of adhesives  1 Thermosetting synthetic resins It is used for making water-proof plywoods, laminates, bonding articles in aircraft and ship building ... 7 Animal glues In manufacturing furniture, radio-cabinates and card-boxes etc.

Name any two constituents of paints with two functions of each.

Description : Name any two constituents of paints with two functions of each.

Last Answer : Constituents of paint: 1. Pigments 2. Vehicle or medium (drying oil) 3. Thinners 4. Driers 5. Fillers 6. Plasticizers Functions of various constituents: Pigments: i) Provides opacity and desired ... i) To give elasticity to the paint film. ii) To prevent the cracking of the film.

Name two ores of Aluminum with chemical formulae.

Description : Name two ores of Aluminum with chemical formulae.

Last Answer : Ores of Aluminum:(Any two) i) Bauxite - Al2O3 .2H2O. ii) Corundum- Al2O3, iii) Feldspar - KAlSi3O8, iv) Mica - [KAlSi2O10(OH)2] v) Cryolite - Na3AlF6 vi) Alunite ( Alumstone)- K2SO4 .Al2(SO4)3 .4Al(OH)3

Define charging, discharging, specific resistance and Ohm’s law.

Description : Define charging, discharging, specific resistance and Ohm’s law.

Last Answer : Charging:- It is the operation of the cell in which external source of current reverses the electrochemical cell reaction in order to restore the battery to its original fully charged state. ... across the conductor & inversely proportional to the resistance (R) of a conductor.