How Computer Power Supplies Work To Your Advantage?

How Computer Power Supplies Work To Your Advantage?
by

1 Answer

Answer :

There are always an advantage to computer power supplies. You will learn in this article why you need computer power supplies to help you. One advantage is that the AC adaptor will help you charge your battery while you can continue to keep working through the day.The battery in the computer can help you work at the park. It can help you work in the car on a long distance trip to visit family and friends. The battery can help you save minutes through the day that you normally would of lost. Make the most of your waiting time at places by getting out the computer and do your work for a few minutes pn the computer.Look around for a plug to save your battery power whenever you are at places. You want to always use your ac adapter in a wall whenever you can. The more that you use the ac adapto
by
selected by

Related questions

Why do some devices have external power supplies and some do not?

Description : Why do some devices have external power supplies and some do not?

Last Answer : The power supply adds bulk to the device. If you are trying to make the thing small and pretty you don’t want to add any extra bulk if you can get away with it.

A tap supplies water at `22^(@)C`, a man takes 1 L of water per min at `37^(@)C` from the geyser. The power of geyser is

Description : A tap supplies water at `22^(@)C`, a man takes 1 L of water per min at `37^(@)C` from the geyser. The power of geyser is

Last Answer : A tap supplies water at `22^(@)C`, a man takes 1 L of water per min at `37^(@)C` from the geyser. The ... is A. 525 W B. 1050 W C. 1775 W D. 2100 W

When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust and debris from the card and burnish the sliding connections C. make sure all connections are tight including wire wrappings and push-on types D. substitute a new or repaired spare card and check the operation of the circuit

Description : When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust ... -on types D. substitute a new or repaired spare card and check the operation of the circuit

Last Answer : Answer: D

What is the purpose of the 'annunciator module' (6000F35) shown in the illustration? EL-0094 A. Provide an input to the setpoint module. B. Drive the alarm lamp and, through the controller, the horn. C. Deliver +5 and +24 volts to their respective power supplies. D. Connect 24 volts to both sides of the horn.

Description : What is the purpose of the 'annunciator module' (6000F35) shown in the illustration? EL-0094 A. Provide an input to the setpoint module. B. Drive the alarm lamp and, through the controller, the horn. ... and +24 volts to their respective power supplies. D. Connect 24 volts to both sides of the horn.

Last Answer : Answer: B

The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Description : The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Last Answer : Answer: B

A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Description : A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Last Answer : D. 8.36 kW

Number of power supplies required to get output of op-amp is A. two B. four C. six D. three

Description : Number of power supplies required to get output of op-amp is A. two B. four C. six D. three

Last Answer : two

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

Load regulation is a measure of a power supplies ability keep a constant output under conditions of changing A) Line voltage B) Current demand C) Temperature D) Oscillator frequency.

Description : Load regulation is a measure of a power supplies ability keep a constant output under conditions of changing A) Line voltage B) Current demand C) Temperature D) Oscillator frequency.

Last Answer : A) Line voltage

What are two types of checks used in troubleshooting power supplies?

Description : What are two types of checks used in troubleshooting power supplies?

Last Answer : Visual and signal tracing.

What are two types of checks used in troubleshooting power supplies?

Description : What are two types of checks used in troubleshooting power supplies?

Last Answer : Visual and signal tracing.

Kaiga-II plant which supplies electricity is a (1) hydel project (2) coal project (3) nuclear power reactor (4) None of the above

Description : Kaiga-II plant which supplies electricity is a (1) hydel project (2) coal project (3) nuclear power reactor (4) None of the above

Last Answer : nuclear power reactor

An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load

Description :  An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: A) 1000 rpm B) 920 rpm C) 950 rpm D) 970 rpm

Last Answer : An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: 970 rpm

A single phase 60 Hz generator supplies an inductive load of 4500kW at a power factor of 0.80 lagging ...

Description : A single phase 60 Hz generator supplies an inductive load of 4500kW at a power factor of 0.80 lagging by means of a 20 km long overhead transmission line. The line resistance and inductance are 0.0195 ohm and 0.60 mH ... voltage regulation of the line.  (A) 12.59% (B) 16.34% (C) 32.68% (D) 41.15% 

Last Answer : Answer is C

A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities...

Description : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 

Last Answer : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 103.2 MW, 51.61 .

Which of the following is not a function of the Output Unit? a) It produces results that can be easily understood by the user b) It accepts the results produced by the computer c) It supplies the data and instructions to the outside world d) It supplies the data and instructions to the computer for further processing

Description : Which of the following is not a function of the Output Unit? a) It produces results that can be easily understood by the user b) It accepts the results produced by the computer c) It ... instructions to the outside world d) It supplies the data and instructions to the computer for further processing

Last Answer : Answer: d Explanation: The output unit is responsible for giving the results to the user in the form of printed report or visual display. It is not responsible for giving the instructions back to the CPU for processing

Which of the following is not a function of the Input Unit? a) It reads instructions and data from the outside world. b) It converts the data into computer acceptable format. c) It makes the data into user understandable format. d) It supplies the data and instructions to the computer for further processing.

Description : Which of the following is not a function of the Input Unit? a) It reads instructions and data from the outside world. b) It converts the data into computer acceptable format. c) It ... into user understandable format. d) It supplies the data and instructions to the computer for further processing.

Last Answer : Answer: c Explanation: The input unit converts the data into computer understandable format i.e. binary format and not the user understandable format. It is the duty of the output unit to make the data into user understandable format

A publishing company purchases a computer to aid in stock control. This computer is an example of which type of industrial product? A)Raw material B)Major supplies C)Accessory equipment D)Component part

Description : A publishing company purchases a computer to aid in stock control. This computer is an example of which type of industrial product? A)Raw material B)Major supplies C)Accessory equipment D)Component part

Last Answer : C)Accessory equipment