Why do some devices have external power supplies and some do not?

Why do some devices have external power supplies and some do not?
by

1 Answer

Answer :

The power supply adds bulk to the device. If you are trying to make the thing small and pretty you don’t want to add any extra bulk if you can get away with it.
by

Related questions

A 24 volt battery supplies three devices wired in parallel that each have a resistance of 9 ohms. What is the voltage drop across each device?

Description : A 24 volt battery supplies three devices wired in parallel that each have a resistance of 9 ohms. What is the voltage drop across each device?

Last Answer : A simple circuit has three resistors connected in series. The resistors are 14 ohms 12 ohms and 9 ohms. What is the total resistance of the circuit?

Can I power external devices using an Arduino board?

Description : Can I power external devices using an Arduino board?

Last Answer : Yes, external devices can be powered using an Arduino board by connecting them to the appropriate output pins, such as the digital or analog pins, and ensuring that the current and voltage requirements are within the limits of the board.

Assertion `:` If all external nerve supplies to a human heart are cut there will be no effect on the heart beat. Reason `:` Human heart is a myogenic

Description : Assertion `:` If all external nerve supplies to a human heart are cut there will be no effect on the heart beat. Reason `:` Human heart is a myogenic

Last Answer : Assertion `:` If all external nerve supplies to a human heart are cut there will be no effect on ... False. D. If both Assertion & Reason are false.

External incontinence devices?

Description : External incontinence devices?

Last Answer : DefinitionExternal incontinence devices are products, called appliances, worn on the outside of the body to protect the skin from constant leakage of stool or urine. Certain medical conditions can ... over the anal opening (rectum).With proper application, a fecal incontinence device may remain

External pneumatic compression has been advocated for the prevention of deep venous thrombosis during operative procedures. Which of the following statement(s) concerning the use of external pneumatic compression devices is/are true? a. Intermittent pneumatic compression is as effective as low-dose heparin in prevention of venous thrombosis b. These devices function by compressing the lower extremities therefore augmenting venous return c. Pneumatic compression devices may also exhibit their antithrombotic effect through stimulating local and systemic fibrinolysis d. The length of time that intermittent pneumatic compression should be used includes through the operation and for at least several days in the postoperative period

Description : External pneumatic compression has been advocated for the prevention of deep venous thrombosis during operative procedures. Which of the following statement(s) concerning the use of external pneumatic ... includes through the operation and for at least several days in the postoperative period

Last Answer : Answer: b, c, d In many well-controlled studies of venous prophylaxis, intermittent pneumatic compression has been found to be as effective as low-dose heparin therapy. In addition to augmentation ... be used through the operation and for at least five days in the face or prolonged immobilization

__________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Description : __________ an external bus standard used for transferring data to and from digital devices. A. Serial Port B. Firewire C. Parallel Port D. USB

Last Answer : D. USB

External devices such as printers, keyboards and modems are known as _________ A. Special Buys B. Add on Devices C. Peripherals D. All of the above

Description : External devices such as printers, keyboards and modems are known as _________ A. Special Buys B. Add on Devices C. Peripherals D. All of the above

Last Answer : C. Peripherals

A bus that connects a computer to Peripheral devices is called _______ A. System Bus B. Memory Bus C. Front-Side Bus D. External Bus

Description : A bus that connects a computer to Peripheral devices is called _______ A. System Bus B. Memory Bus C. Front-Side Bus D. External Bus

Last Answer : D. External Bus

Which are the not causes of the interrupt: a. In any single device b. In processor poll devices c. Itis an external analogy to exception d. None of these

Description : Which are the not causes of the interrupt: a. In any single device b. In processor poll devices c. Itis an external analogy to exception d. None of these

Last Answer : c. Itis an external analogy to exception

The word "Computer" usually refers to the Central Processing Unit plus: a) Input Devices b) External Memory c) Internal Memory d) None of The Above

Description : The word "Computer" usually refers to the Central Processing Unit plus: a) Input Devices b) External Memory c) Internal Memory d) None of The Above

Last Answer : c) Internal Memory

Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Description : Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Last Answer : b) 4, 3, 1 and 2

8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : a) EA, high, internal, external

A tap supplies water at `22^(@)C`, a man takes 1 L of water per min at `37^(@)C` from the geyser. The power of geyser is

Description : A tap supplies water at `22^(@)C`, a man takes 1 L of water per min at `37^(@)C` from the geyser. The power of geyser is

Last Answer : A tap supplies water at `22^(@)C`, a man takes 1 L of water per min at `37^(@)C` from the geyser. The ... is A. 525 W B. 1050 W C. 1775 W D. 2100 W

How Computer Power Supplies Work To Your Advantage?

Description : How Computer Power Supplies Work To Your Advantage?

Last Answer : There are always an advantage to computer power supplies. You will learn in this article why you need computer power supplies to help you. One advantage is that the AC adaptor will help you charge your battery ... use your ac adapter in a wall whenever you can. The more that you use the ac adapto

When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust and debris from the card and burnish the sliding connections C. make sure all connections are tight including wire wrappings and push-on types D. substitute a new or repaired spare card and check the operation of the circuit

Description : When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust ... -on types D. substitute a new or repaired spare card and check the operation of the circuit

Last Answer : Answer: D

What is the purpose of the 'annunciator module' (6000F35) shown in the illustration? EL-0094 A. Provide an input to the setpoint module. B. Drive the alarm lamp and, through the controller, the horn. C. Deliver +5 and +24 volts to their respective power supplies. D. Connect 24 volts to both sides of the horn.

Description : What is the purpose of the 'annunciator module' (6000F35) shown in the illustration? EL-0094 A. Provide an input to the setpoint module. B. Drive the alarm lamp and, through the controller, the horn. ... and +24 volts to their respective power supplies. D. Connect 24 volts to both sides of the horn.

Last Answer : Answer: B

The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Description : The electrical energy necessary to power a sound-powered telephone's small vibrating bell is obtained from _________. A. the emergency batteries for the general alarm B. each station's hand-cranked generator C. the emergency switchboard D. normal 115 volt DC supplies

Last Answer : Answer: B

A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Description : A transmitter supplies 8 kW to the antenna when it is unmodulated, determine the total radiated power when modulated at 90%. A. 5 kW B. 20 kW C. 15 kW D. 8.36 kW

Last Answer : D. 8.36 kW

Number of power supplies required to get output of op-amp is A. two B. four C. six D. three

Description : Number of power supplies required to get output of op-amp is A. two B. four C. six D. three

Last Answer : two

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

Load regulation is a measure of a power supplies ability keep a constant output under conditions of changing A) Line voltage B) Current demand C) Temperature D) Oscillator frequency.

Description : Load regulation is a measure of a power supplies ability keep a constant output under conditions of changing A) Line voltage B) Current demand C) Temperature D) Oscillator frequency.

Last Answer : A) Line voltage

What are two types of checks used in troubleshooting power supplies?

Description : What are two types of checks used in troubleshooting power supplies?

Last Answer : Visual and signal tracing.

What are two types of checks used in troubleshooting power supplies?

Description : What are two types of checks used in troubleshooting power supplies?

Last Answer : Visual and signal tracing.

Kaiga-II plant which supplies electricity is a (1) hydel project (2) coal project (3) nuclear power reactor (4) None of the above

Description : Kaiga-II plant which supplies electricity is a (1) hydel project (2) coal project (3) nuclear power reactor (4) None of the above

Last Answer : nuclear power reactor

An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load

Description :  An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: A) 1000 rpm B) 920 rpm C) 950 rpm D) 970 rpm

Last Answer : An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: 970 rpm

A single phase 60 Hz generator supplies an inductive load of 4500kW at a power factor of 0.80 lagging ...

Description : A single phase 60 Hz generator supplies an inductive load of 4500kW at a power factor of 0.80 lagging by means of a 20 km long overhead transmission line. The line resistance and inductance are 0.0195 ohm and 0.60 mH ... voltage regulation of the line.  (A) 12.59% (B) 16.34% (C) 32.68% (D) 41.15% 

Last Answer : Answer is C

A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities...

Description : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 

Last Answer : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 103.2 MW, 51.61 .