Define faults and state any two types of fault.

Define faults and state any two types of fault.
by

2 Answers

Answer :

Fault: It is defined as the rupture / fracture along which there is a relative movement of beds of rocks, called as fault.

Types of fault:

1. Translational fault

2. Rotational fault

3. Normal or gravity fault

4. Reverse or thrust fault

5. Dextral fault

6. Sinistral fault

7. Strike fault

8. Dip fault

9. Oblique fault

10. Radial fault

11. Enechelon fault

12. Accurate or peripheral fault
by

Answer :

Fault: It is defined as the rupture / fracture along which there is a relative movement of beds.

Types of fault :

1. Based on position of fault plane.

i. Normal Fault

ii. Reverse Fault

2. Based on their genesis.

i. Gravity fault

ii. Thrust fault

iii. Strike / slip fault

3. Horst and Graben

4. Step fault

5. Bedding fault

6. Dip fault

7. Strike fault  
by

Related questions

Define outcrop and faults.

Description : Define outcrop and faults.

Last Answer : i) Out crop: The dip and strike of beds can be easily measured in the field from their exposures called outcrops.  ii) Fault: The fractures along which there has been relative movement ... process of development of fractures and displacement of the blocks against each other is termed as faulting.

Explain different types of faults occurs in rocks.

Description : Explain different types of faults occurs in rocks. 

Last Answer : Types of Faults: 1. Normal Faults a. Horst & Graben b. Half- Grabens 2. Reverse Faults a. Thrust Faults b. Overthrust Faults c. Underthrust Faults 3. Strike Fault 4. Dip Fault 5 ... Faults 13. Enechelon Faults 14. Transform Faults 15. Ring Faults 16. Listric Faults 17. Oblique Faults

Define fault and state its classification

Description : Define fault and state its classification

Last Answer : Fault: The fractures along which there has been relative movement of the blocks past each other. The entire process of development of fractures and displacement of the blocks against each other is termed as ... by a movement of the disrupted blocks along a medical poit called the hinge point.  

State any 2 types of fault.

Description : State any 2 types of fault.

Last Answer : Types of fault are as follows 1. Translational fault 2. Rotational fault 3. Normal or gravity fault 4. Reverse or thrust fault 5. Dextral fault 6. Sinistral fault 7. Strike fault 8. Dip fault 9. Oblique fault 10. Radial fault 11. Enechelon fault 12. Accurate or peripheral fault

Define: 1) Fault 2) Folding

Description : Define: 1) Fault 2) Folding

Last Answer : 1. Fault: Fault is fracture, along which the movement of the one block with respect to other has taken place. The movement may vary from a few centimeters to many kilometers depending upon the nature ... are tilted out of the horizontal plane forming a set of arches and troughs is called fold.. 

What do you mean by normal and reverse fault?

Description : What do you mean by normal and reverse fault?

Last Answer : i) Normal fault: A normal fault is the one in which the hanging wall has apparently moved down with respect to the foot-wall  ii) A Reverse fault is one in which the hanging wall has apparently moved up with respect to the footwall A reverse fault is that thrust which dips more than 450

State the types of consistency limit and define any one

Description : State the types of consistency limit and define any one

Last Answer : Types of consistency limit 1.Liquid limit 2.Plastic limit 3.Shrinkage limit Liquid limit- It is minimum water content at which two separated grooved soil parts mixed together under 25 blows of ... in volume of soil due to further decrease in water content : is termed as shrinkage limit.

Define any four types of folds and explain any one.

Description : Define any four types of folds and explain any one.

Last Answer : State any four types of folds and explain any one. Types of Folds: 1. Based on appearance in cross section. i. Anticline fold ii. Syncline fold 2. Based on position of ... unsymmetrical nature. The angle of both limbs may be 600 and 300 with horizontal indicating asymmetrical fold.

Define Soil Stabilization. State any three points of necessary of soil stabilization.

Description : Define Soil Stabilization. State any three points of necessary of soil stabilization.

Last Answer : Define: - Soil Stabilization is defined as improving the engineering performance of soil by artificial means. Necessity of Soil Stabilization : - 1. To increase the shear strength of soil. 2. To reduce ... of structures. 6. To increase the density of soil. 7. To reduce permeability of soil.

Define compaction and state purpose of compaction.

Description : Define compaction and state purpose of compaction.

Last Answer : Define Compaction : Instant compression of soil under dynamic load is called compaction Purpose of compaction : 1. To increase density and thereby shear strength and bearing capacity of soil, this is ... of earth dam. 5.To increase resistance towards erossion of soil by rain and other causes.

Define shear strength of soil and state field situations of shear failure.

Description : Define shear strength of soil and state field situations of shear failure. 

Last Answer : Shear Strength of Soil: Shear strength is a term used in soil mechanics to describe the magnitude of the shear stress that a soil can sustain. . Field situations where shear failure occurs 1) ... wall, especially surcharge 3)Under foundation along planes of maximum shear 4) Sub grades of road.

Define Flow Net and state its characteristic

Description : Define Flow Net and state its characteristic

Last Answer : Flow Net: - The grid, mesh or net formed by intersection of equipotential line and flow a line is called as flow net. Characteristic of Flow Net: - i) In a flow net, flow lines ... approximately squares. v) The flow net is representative of the flow pattern and dissipation of the hydraulic head.

Define minerals and state any six properties of minerals.

Description : Define minerals and state any six properties of minerals.

Last Answer : Minerals have distinguishing physical properties that in most cases can be use to determine the identity of the mineral. Among the various properties crystal, habit, cleavage, hardness, density, luster, ... of water) Colour: color is sometimes an extremely diagnostic property of mineral

Define joints and state their classification.

Description : Define joints and state their classification.

Last Answer : Joints: joint are defined as a fracture in rock where there has been no lateral movement in the plane of the fracture (up, down or sideway) of one side relative to the other. Classification of joints ... , iii) Oblique joints. c) Origin i) Tension joints, ii) Shear joints, iii) Compression joints

Define geology and state its branches.

Description : Define geology and state its branches.

Last Answer : Geology: Geology is the science of study of the solid matter that constitutes the Earth. Encompassing such things as rocks, soil, gemstones, geology studies, the composition, structure, physical properties ... geology ix. Applied geology x. Hydrology xi. Indian geology xii. photo-geology

State the Darcy’s law of permeability with expression. Hence define coefficient of permeability.

Description : State the Darcy’s law of permeability with expression. Hence define coefficient of permeability.

Last Answer : Darcy's law of permeability: It states that for laminar flow, the rate of flow or discharge per unit time is directly proportional to hydraulic gradient. Expression: q = KiA  / = Ki  V = Ki ... velocity of flow under a unit hydraulic gradient through a soil. Mathematically: K = V/i

Explain the formation process of soil and state any two types of soil in India.

Description : Explain the formation process of soil and state any two types of soil in India.

Last Answer : Soil formation: Soil formation mainly takes place due to mechanical disintegration or chemical decomposition of rocks whenever rock get exposed to atmosphere, it is acted by various weathering agencies and it gets ... soil ii. Alluvial soil iii. Glacial soil iv. Lacustrine soil v. Eolian soil  

The San Andreas fault in California is a classic example of which of the following types of faults? w) tear fault x) upthrust fault y) dip-slip fault z) strike-slip fault

Description : The San Andreas fault in California is a classic example of which of the following types of faults? w) tear fault x) upthrust fault y) dip-slip fault z) strike-slip fault

Last Answer : ANSWER: Z -- STRIKE-SLIP FAULT

In geological studies, a reverse fault having a di less than 10 degrees is known as which of the following types of faults. w) normal x) overthrust y) strike-slip z) none of the above.

Description : In geological studies, a reverse fault having a di less than 10 degrees is known as which of the following types of faults. w) normal x) overthrust y) strike-slip z) none of the above.

Last Answer : ANSWER: X -- OVERTHRUST

State the types of earthquakes based on focus and Richter scale.

Description : State the types of earthquakes based on focus and Richter scale. 

Last Answer : Earthquakes based on focus distributed in three general depth ranges: i) Shallow earthquakes originate within about 60 kilometers of the surfaces ii) Intermediate earthquakes have foci between 60 to 300 ... causes several damages iii) Magnitude 2 represents the smallest tremor that can be felt. 

What is a fold and state its types ?

Description : What is a fold and state its types ? 

Last Answer : Fold: It is defined as undulations or curvatures developed in the rocks of the crust as a result of stresses to which these rocks have been subjected from time to time in the past history of the earth. ... open fold and thickness is more at trough and crest at the limbs is called closed fold.

What is meant by geologic cycle? State the types of weathering and explain brief.

Description : What is meant by geologic cycle? State the types of weathering and explain brief.

Last Answer : Geologic cycle: The most important of these begins with molten magma from within the earth crystallizing into rock then continues with the rock being broken down into soil and that soil then being ... the break down and decay of rock indeed their part in soil formation is of major significance

State any four types of minerals with properties depending on light and state of aggregation.

Description : State any four types of minerals with properties depending on light and state of aggregation. 

Last Answer : State any four types of minerals with properties depending on light and state of aggregation.  

State types of rocks based on their genesis (mode of origin).

Description : State types of rocks based on their genesis (mode of origin).

Last Answer : 1. Igneous Rocks 2. Sedimentary Rocks 3. Metamorphic Rocks

Define outcrop and fold of rock.

Description : Define outcrop and fold of rock. 

Last Answer : i) Out crop: The dip and strike of beds can be easily measured in the field from their exposures called outcrops  ii) Fold: Folds may be defined as undulations or bends that are developed in the rock ... To which these rock have been subjected to, from time to time in the past history of the Earth.

Define: 1) Degree of saturation and 2) Air content.

Description : Define: 1) Degree of saturation and 2) Air content.

Last Answer : i) Degree of saturation: The degree saturation is a ratio of the volume of water in the voids to the volume of voids. It is expressed as per cent ii) Air When soil mass is completely dry the ... = Vv Air content is defined as ratio of volume of air to volume of voids, i.e ac =Va/Vv

Define outcrop and strike

Description : Define outcrop and strike

Last Answer : i) Out crop: The dip and strike of beds can be easily measured in the field from their exposures called outcrops ii) Strike: The horizontal distance perpendicular to the fault plane is called as strike.

Define ultimate bearing capacity and safe bearing capacity.

Description : Define ultimate bearing capacity and safe bearing capacity.

Last Answer : Ultimate bearing capacity (qu): It is the gross pressure at the base of the foundation at which the soil fails in shear is called as ultimate bearing capacity. Safe bearing capacity (qs) : It ... capacity is also referred to as the ultimate bearing capacity qu divided by factor of safety F.

Define void ratio; porosity; water content and degree of saturation.

Description : Define void ratio; porosity; water content and degree of saturation.

Last Answer : i) Voids Ratio: Voids ratio e of a given soil sample is the ratio of the volume of voids to the volume of soil solids in the given soil mass. e=Vv/Vs ii) Porosity: The ratio of volume of voids ( ... ratio of the volume of water in the voids to the volume of voids. It is expressed as per cent

Define folds and draw neat sketch of a fold and label its different parts.

Description : Define folds and draw neat sketch of a fold and label its different parts. 

Last Answer : Fold: Folds may be defined as undulations or bends that are developed in the rock of the Earth’s crust, as a result of stresses (commonly lateral compression) To which these rocks have been subjected to, from time to time in the past history of the Earth.

Define earthquake and intensity.

Description : Define earthquake and intensity.

Last Answer : i. Earthquake: It is define as vibrations induced in the earth's crust due to internal or external causes that virtually shake up a part of the crust and all the structures and living and ... of the actual shaking at the location during an earthquake and is assigned as Roman Capital Numerical.

Define permeability and coefficient of permeability

Description : Define permeability and coefficient of permeability 

Last Answer : Definition i) Permeability (k) It is defined as the properly of soli which permits the seepage of fluid through interconnecting voids under gravity OR Permeability (k) It is defined as the speed at which ... is represented as K = v/i  Where v = discharge velocity in m/s i = hydraulic gradient

Define plasticity index and classify soil on its basis.

Description : Define plasticity index and classify soil on its basis.

Last Answer : a) Plasticity index (Ip) It is give measure of degree of plasticity of soil. It is difference be liquid limit and plastic limit Ip = WL - Wp Greater plasticity index, the greater is degree of plasticity of the soil. ... based on Ip i) Non plastic soil  If wp = o        Ip = wL ii) Plastic soil

Define petrology and rock

Description : Define petrology and rock

Last Answer : a. Petrology: Formation of various types of rocks, their mode of occurrence, composition, texture and structures, geological and geographical distribution on the earth are all studied uner petrology. It ... of one mineral i.e. monomineralic or it may consist of different minerals i.e. polymineralic

Define outcrop, Dip , Strike and fold of Rocks.

Description : Define outcrop, Dip , Strike and fold of Rocks.

Last Answer : 1.Outcrop -The exposure of solid rock on the earth surface is known as outcrop.  2.Dip - It is the inclination of bedding plane of rock with horizontal is called as Dip.  3.Strike - ... the bends or curvatures in rock formed due to action of compressive forces on horizontal layers called as fold.

Define term porosity.

Description : Define term porosity. 

Last Answer : Porosity- It is the ratio of volume of voids to the total volume of soil , measured in percentage is called as porosity. 

Define water content and voids ratio of soil.

Description : Define water content and voids ratio of soil.

Last Answer : Water content- It is the ratio of weight of water to weight of soil soilds which is measured in percentage called as water content.  Voids ratio – It is the ratio of volume of voids to volume of solids called as voids ratio.

Define Liquid limit, Plastic Limit, Shrinkage limit and Plasticity index.

Description : Define Liquid limit, Plastic Limit, Shrinkage limit and Plasticity index.

Last Answer : Liquid limit (WL) - It is minimum water content at which two separated grooved soil parts mixed together under 25 blows of casagrande's liquid limit apparatus; is called as liquid limit. Plastic limit (Wp ... difference between the liquid limit (WL) and plastic limit (Wp). IP = WL - Wp

Define safe bearing capacity and allowable bearing pressure.

Description : Define safe bearing capacity and allowable bearing pressure. 

Last Answer : Safe bearing capacity (qs): It is the maximum pressure which the soil can carry without risk of shear failure is called as safe bearing capacity.  OR Sometimes the safe bearing capacity is ... in shear nor there is excessive settlement of structure, is called as Allowable bearing pressure.

Define permeability and Phreatic Line

Description : Define permeability and Phreatic Line

Last Answer : Permeability  “It is defined as the properly of soli which permits the seepage of fluid through interconnecting voids under gravity  Phreatic Line: The topmost seepage line in an earthen dam at which hydrostatic pressure is zero, is called as Phreatic line.

Define dip and folds.

Description : Define dip and folds.

Last Answer : Dip – It is the inclination of bedding plane of rock with horizontal is called as Dip. Fold – It is the bends or curvatures in rock formed due to action of compressive forces on horizontal layers called as fold.

Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer.

Description : Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer. 

Last Answer : Specific Gravity: It is ratio of unit weight in air of a given volume of soil solids at a specific temperature to unit weight in air of an equal volume of distilled water at same temperature. ... Repeat all above steps two more times to calculate average specific gravity of given soil sample.

Define i. Seismology ii. Focus iii. Epicenter iv. Intensity

Description : Define i. Seismology ii. Focus iii. Epicenter iv. Intensity

Last Answer : i. Seismology: A branch of geophysical science dealing with to study the causes and effects of the earthquakes and to make predictions of their occurrence in the future. ii. Focus: It is a ... of the actual shaking at the location during an earthquake and is assigned as Roman capital letters.

Define Liquid limit.

Description : Define Liquid limit.

Last Answer : Liquid limit (WL): It is minimum water content at which two separated grooved soil parts mixed together under 25 blows of casagrande’s liquid limit apparatus; is called as liquid limit.

Define weathering of rocks.

Description : Define weathering of rocks.

Last Answer : Weathering of rock : The process, by which the rock is decayed, disintegrated and decomposition with the action of the distractive mechanical or chemical action of the physical agent of atmosphere like wind, water and ice is called a Weathering.

Define : i. Void ratio ii. Water content.

Description : Define : i. Void ratio ii. Water content. 

Last Answer : i. Void Ratio: It is the ratio of volume of voids to the volume of solids.  ii. Water It is the ratio of the weight of water (Ww) to the weight of solids (Ws). 

Define CBR and write the significance of CBR .

Description : Define CBR and write the significance of CBR . 

Last Answer : i) Definition : The California Bearing Ratio abbreviated as CBR is defined as the ratio of test load to the standard load, expressed as percentage for a given penetration of plunger ii) ... It is used for evaluating the suitability of subgrade, sub - base and base course materials. 

Define compaction and write any three rollers used for compaction with their suitability.

Description : Define compaction and write any three rollers used for compaction with their suitability.

Last Answer : Compaction: Instant compression of soil under dynamic load is called compaction. Rollers with their suitability a) Smooth wheel rollers: Suitability: These rollers best suitable for subgrade or base coarse ... thickness. c) Sheep foot roller: Suitability: Suitable only for fine grained soil. 

Define: (i) Consistency limit (ii) Liquid limit (iii) Plastic limit (iv) Shrinkage limit

Description : Define: (i) Consistency limit (ii) Liquid limit (iii) Plastic limit (iv) Shrinkage limit

Last Answer : 1. Consistency Limit: The water content at which the soil passes from one state to the another state is called as consistency limit.  2. Liquid Limit: It is defined as the maximum water ... water content at which further reduction in water content will not cause decrease in volume of soil mass. 

Define earthquake and classify it on the basis of origin.

Description : Define earthquake and classify it on the basis of origin. 

Last Answer : Earthquake: An earthquake is the result from the sudden release of stored energy due to abrupt dislocation and disturbances within its interior causes the sudden vibrations (shaking) of the ... Earth Quake: Earth Quake originated due to volcanic eruption, atomic explosions, Landslides, avalanches.