Explain different types of faults occurs in rocks.

Explain different types of faults occurs in rocks. 
by

1 Answer

Answer :

Types of Faults:

1. Normal Faults

a. Horst & Graben

b. Half- Grabens

2. Reverse Faults

a. Thrust Faults

b. Overthrust Faults

c. Underthrust Faults

3. Strike Fault

4. Dip Fault

5. Strike slip Faults

6. Dip slip Faults

7. Step Faults

8. Parallel Faults

9. Hinge Faults

10. Emergent Faults

11. Radial Faults

12. Peripheral Faults

13. Enechelon Faults

14. Transform Faults

15. Ring Faults

16. Listric Faults

17. Oblique Faults
by

Related questions

Define faults and state any two types of fault.

Description : Define faults and state any two types of fault.

Last Answer : Fault: It is defined as the rupture / fracture along which there is a relative movement of beds. Types of fault : 1. Based on position of fault plane. i. Normal Fault ii. Reverse Fault 2. Based on ... fault 3. Horst and Graben 4. Step fault 5. Bedding fault 6. Dip fault 7. Strike fault  

Define outcrop and faults.

Description : Define outcrop and faults.

Last Answer : i) Out crop: The dip and strike of beds can be easily measured in the field from their exposures called outcrops.  ii) Fault: The fractures along which there has been relative movement ... process of development of fractures and displacement of the blocks against each other is termed as faulting.

State types of rocks based on their genesis (mode of origin).

Description : State types of rocks based on their genesis (mode of origin).

Last Answer : 1. Igneous Rocks 2. Sedimentary Rocks 3. Metamorphic Rocks

State classification of rocks based on their genesis.

Description : State classification of rocks based on their genesis.

Last Answer : Rocks on the basis of their origin are broadly divided into three major classes 1) Igneous rock. 2) Sedimentary rock. 3) Metamorphic rock.

Define outcrop, Dip , Strike and fold of Rocks.

Description : Define outcrop, Dip , Strike and fold of Rocks.

Last Answer : 1.Outcrop -The exposure of solid rock on the earth surface is known as outcrop.  2.Dip - It is the inclination of bedding plane of rock with horizontal is called as Dip.  3.Strike - ... the bends or curvatures in rock formed due to action of compressive forces on horizontal layers called as fold.

Define weathering of rocks.

Description : Define weathering of rocks.

Last Answer : Weathering of rock : The process, by which the rock is decayed, disintegrated and decomposition with the action of the distractive mechanical or chemical action of the physical agent of atmosphere like wind, water and ice is called a Weathering.

Explain Different types of forms occurring in rock minerals.

Description : Explain Different types of forms occurring in rock minerals.

Last Answer : Types of forms occurring in rock minerals 1. Tabular Form- In this type of form , minerals appears as slabs of uniform thickness e.g. Feldspar. 2. Lamellar Form -Minerals appears as thin ... Form - Minerals appears in the form of irregular shaped compact bodies with curved surfaces e.g. Limestone

Explain any two types of weathering: - 1. Mechanical Weathering 2. Chemical Weathering 3. Biological Weathering. 4. Spheroidal Weathering.

Description : Explain any two types of weathering: - 1. Mechanical Weathering 2. Chemical Weathering 3. Biological Weathering. 4. Spheroidal Weathering. 

Last Answer : 1. Mechanical Weathering: - a) In mechanical weathering the rock surface is broken into smaller pieces without any chemical change. b) In mechanical weathering the smaller broken smaller rock ... rock. c) The main factor that affects chemical weathering are hydration, carbonizations, oxidation.

What is meant by geologic cycle? State the types of weathering and explain brief.

Description : What is meant by geologic cycle? State the types of weathering and explain brief.

Last Answer : Geologic cycle: The most important of these begins with molten magma from within the earth crystallizing into rock then continues with the rock being broken down into soil and that soil then being ... the break down and decay of rock indeed their part in soil formation is of major significance

Enlist various types of seismic waves and explain one.

Description : Enlist various types of seismic waves and explain one.

Last Answer : Types of seismic waves 1. Primary or Longitudinal Waves 2. Secondary or Traverse waves 3. Long or surface waves-Rayleigh waves and love waves Primary Waves- (P-wave)- These ... These waves gives major destruction during earthquake . these waves are complex in nature having large amplitude.

Explain the formation process of soil and state any two types of soil in India.

Description : Explain the formation process of soil and state any two types of soil in India.

Last Answer : Soil formation: Soil formation mainly takes place due to mechanical disintegration or chemical decomposition of rocks whenever rock get exposed to atmosphere, it is acted by various weathering agencies and it gets ... soil ii. Alluvial soil iii. Glacial soil iv. Lacustrine soil v. Eolian soil  

Define any four types of folds and explain any one.

Description : Define any four types of folds and explain any one.

Last Answer : State any four types of folds and explain any one. Types of Folds: 1. Based on appearance in cross section. i. Anticline fold ii. Syncline fold 2. Based on position of ... unsymmetrical nature. The angle of both limbs may be 600 and 300 with horizontal indicating asymmetrical fold.

State different methods of soil stabilization and explain any one

Description : State different methods of soil stabilization and explain any one

Last Answer : i) Mechanical stabilization - It is the process of improving properties of soil by changing its gradation. It depends on mechanical strength of aggregate, mineral composition etc Eg - Compaction at near ... help to drain water, increase strength, decrease mixing of soil, filters the water etc. 

Explain with neat sketch Phreatic line in earthen dam with pressure head at different point and show construction points of this line.

Description : Explain with neat sketch Phreatic line in earthen dam with pressure head at different point and show construction points of this line. 

Last Answer : Procedure for locating the Phreatic line i) Draw an earthen dam having upstream face AB with water surface. ii) On water surface measure distance BC = 0.3 L C is starting pt of base parabola. Let F' ... parabola i.e. Phreatic line. viii) Here G,Q1,Q2,Q3,Q4 and B represent Phreatic line 

Explain different methods of field compaction of soil.

Description : Explain different methods of field compaction of soil.

Last Answer : Methods of field compaction of soil i) Rolling- In this method, soil is compacted by using 6-8 tonne heavy rollers. The rollers are selected as per type of soil. Due to ... compactors. Vibrations of large amplitude, rearrange the soil particles together and hence overall compaction takes place.

State the types of earthquakes based on focus and Richter scale.

Description : State the types of earthquakes based on focus and Richter scale. 

Last Answer : Earthquakes based on focus distributed in three general depth ranges: i) Shallow earthquakes originate within about 60 kilometers of the surfaces ii) Intermediate earthquakes have foci between 60 to 300 ... causes several damages iii) Magnitude 2 represents the smallest tremor that can be felt. 

Enlist various types of seismic waves. How it can be recorded?

Description : Enlist various types of seismic waves. How it can be recorded?

Last Answer : ii) P or Primary waves iii) S or Secondary waves iv) L or long waves The vibrations that are set up when an earthquake propagated as number of different types of waves. Different types ... A major shock recorded by seismograph and its epicenter, time of origin, depth of focus, magnitude etc.

What is a fold and state its types ?

Description : What is a fold and state its types ? 

Last Answer : Fold: It is defined as undulations or curvatures developed in the rocks of the crust as a result of stresses to which these rocks have been subjected from time to time in the past history of the earth. ... open fold and thickness is more at trough and crest at the limbs is called closed fold.

State the types of consistency limit and define any one

Description : State the types of consistency limit and define any one

Last Answer : Types of consistency limit 1.Liquid limit 2.Plastic limit 3.Shrinkage limit Liquid limit- It is minimum water content at which two separated grooved soil parts mixed together under 25 blows of ... in volume of soil due to further decrease in water content : is termed as shrinkage limit.

Enlist types of joints.

Description : Enlist types of joints.

Last Answer : Types of joints are 1. Strike Joint 2. Dip Joint 3. Oblique Joint 4. Columnar Joint 5. Tension Joint 6. Shear Joint 7. Tight Joint 8. Block or Mural Joint 9. Sheet Joint

State any 2 types of fault.

Description : State any 2 types of fault.

Last Answer : Types of fault are as follows 1. Translational fault 2. Rotational fault 3. Normal or gravity fault 4. Reverse or thrust fault 5. Dextral fault 6. Sinistral fault 7. Strike fault 8. Dip fault 9. Oblique fault 10. Radial fault 11. Enechelon fault 12. Accurate or peripheral fault

List types of joints with sketches.

Description : List types of joints with sketches.

Last Answer : Types of joints are 1. Strike Joint 2. Dip Joint 3. Oblique Joint 4. Tension Joint 5. Shear Joint

State any four types of minerals with properties depending on light and state of aggregation.

Description : State any four types of minerals with properties depending on light and state of aggregation. 

Last Answer : State any four types of minerals with properties depending on light and state of aggregation.  

Determine the practical applications of various types of compaction equipments.

Description : Determine the practical applications of various types of compaction equipments.

Last Answer : Practical applications of compaction equipments: 1. Compaction by rolling: a) Smooth Wheel Rollers: These rollers best suitable for subgrade or base coarse compaction of cohesion less soils. b) Pneumatic ... It is suitable for compacting granular soils with no fines in layer up to 1 m.

Define folds and draw neat sketch of a fold and label its different parts.

Description : Define folds and draw neat sketch of a fold and label its different parts. 

Last Answer : Fold: Folds may be defined as undulations or bends that are developed in the rock of the Earth’s crust, as a result of stresses (commonly lateral compression) To which these rocks have been subjected to, from time to time in the past history of the Earth.

Explain with neat sketch stepwise procedure to determine bulk density by sand replacement method.

Description : Explain with neat sketch stepwise procedure to determine bulk density by sand replacement method.

Last Answer : i) A flat area, approximately 450sq.mm of the soil to be tested should be exposed and trimmed down to a level surface, preferably with the aid of the scraper tool. ii) The metal tray with a ... gram. These measurements should be repeated at least thrice and the mean weight (W3) taken.    

Explain the method of determination in-situ density with a core-cutter.

Description : Explain the method of determination in-situ density with a core-cutter.

Last Answer : Dry unit weight of soil (γd) :The dry unit weight (γd) is the weight of solids (Ws) per unit of its total volume (V) (prior to drying) of the soil mass. (γd) = Ws/ V Procedure ... content determination. -Repeat the test at two or three locations nearly and get the average dry density

State and briefly explain any four physical properties of minerals.

Description : State and briefly explain any four physical properties of minerals. 

Last Answer : Minerals have distinguishing physical properties that in most cases can be use to determine the identity of the mineral. Among the various properties crystal, habit, cleavage, hardness, density, luster, ... volume of water) Colour: color is sometimes an extremely diagnostic property of mineral

Explain dry strength and Dilatancy test on soil.

Description : Explain dry strength and Dilatancy test on soil. 

Last Answer : This is simple test which is used in the field for rough classification of soil. i) The prepared soil sample is completely dried in the sun or by air drying. Its strength is ... reaction is observed and recorded; inorganic soils exhibit a quick reaction whereas clays exhibit known to slow.

Explain plate load test and draw a load settlement curve

Description : Explain plate load test and draw a load settlement curve

Last Answer : i) Plate load test is a filed test to determine the ultimate bearing capacity f soil and probable settlement under given loading. ii) The test essentially consist in loading a rigid plate, called bearing ... /hr xi) the results of test are plotted between settlement and load intensity

Explain laboratory procedure for mechanical sieve analysis of soil.

Description : Explain laboratory procedure for mechanical sieve analysis of soil.

Last Answer : Laboratory Procedure for mechanical sieve Analysis Mechanical in laboratory 1) Dry sieve Analysis 2) Wet sieve analysis Apparatus required for test - i) Weighing balance accurate to 1g and 0.1g ... through the set of sieves. The material retained on each sieve is weighed and analysed

Explain any four field applications of Geotechnical Engineering.

Description : Explain any four field applications of Geotechnical Engineering.

Last Answer : The Field application of GTE as a) Foundation design b) Pavement design c) Design of earth retaining structures d) Design of earthen dams e) Design of embankment slopes f) ... Underground structures The shape of tunnel depends on the type of soil, geological stability of beds  

Explain crust, mantle and core with a neat sketch.

Description : Explain crust, mantle and core with a neat sketch.

Last Answer : The planet earth is composed of 3 parts namely :-  a) Atmosphere  b) Lithosphere  c) Hydrosphere  The Lithosphere is solid and stony portion of the earth. The body of earth is subdivided into three ... is hot and solid. The average density is about 12 g/cc. It consist iron & nickel. 

Explain phreatic line in earthen dam with a sketch.

Description : Explain phreatic line in earthen dam with a sketch.

Last Answer : Phreatic line in earthen dam1.The line in earthen dam section below which there is positive hydrostatic pressure exists. Phreatic line separates the dry and wet part of earthen dam body as it acts as boundry ... toe material. Hence, a rock toe is necessary to avoid removal of toe portion of dam. 

Draw particle size distribution curve. Explain mechanical sieve analysis for grading of soil with a sketch.

Description : Draw particle size distribution curve. Explain mechanical sieve analysis for grading of soil with a sketch.

Last Answer : Mechanical sieve analysis -The process of analyzing the particle size present in soil by using mechanical means, is known as mechanical sieve Analysis. By performing mechanical sieve analysis, a particle size ... c) Fine grained soil d) Coarse grained soil e) Uniformly graded soil

Explain the use of soil as a foundation material.

Description : Explain the use of soil as a foundation material.

Last Answer : i) The foundation is rest on the soil ii) Soil-cement mixture used as sub grade. iii) Pervious and impervious soil is used in earthen dams iv) Soil used as bed of foundation

Explain with sketch mechanical sieve analysis.

Description : Explain with sketch mechanical sieve analysis.

Last Answer : Mechanical sieve analysis - The process of analyzing the particle size present in soil by using mechanical means, is known as mechanical sieve Analysis. By performing mechanical sieve analysis, a particle size ... c) Fine grained soil d) Coarse grained soil e) Uniformly graded soil

Explain with sketch Mohr-Coulomb failure theory.

Description : Explain with sketch Mohr-Coulomb failure theory.

Last Answer : Mohr presented a theory for rupture in materials. The failure along a plane in a material occurs by a critical combination of normal and shear stresses, and not by normal or shear stress alone. The ... to the Mohr circles can be drawn, and is called the Mohr-Coulomb failure envelope. 

Explain with sketch concept of zero air voids line.

Description : Explain with sketch concept of zero air voids line.

Last Answer : Zero Air Void Line: If the soil is assumed to be 100% saturated and different dry densities are calculated for 100% saturation, then the resulting line on the compaction curve is called the ... respect to water content cannot reach its theoretical value even after applying heavy compaction.

Explain with sketch flow net

Description : Explain with sketch flow net

Last Answer : Flow Net: The grid, mesh or net formed by intersection of equipotential line and flow lines is called as flow net. In a flow net, flow lines and equipotential lines intersect each other at right ... . The flow net is representative of the flow pattern and dissipation of the hydraulic head.

Explain with sketch specific gravity determination by pcynometer.

Description : Explain with sketch specific gravity determination by pcynometer.

Last Answer : Determination of specific gravity by pycnometer test: Precedure :- 1. Dry the pycnometer and weigh it with its cap (W1) 2. Take about 200 g to 300 g of oven dried soil passing through 4. ... with cap screw on. 8. Weigh the pycnometer after drying it on the outside thoroughly (W4).

Explain with sketch plate load test.

Description : Explain with sketch plate load test.

Last Answer : Procedure i) Excavate a pit of depth equal to 5 times to that of breath of proposed footing. ii) Keep the suitable bearing plate of specified size (30, 45, 60, 75cm square in plan) ... Finally plot a graph of load vs. settlement to find out load before failure as bearing capacity of soil. 

Explain I.S. classification of soil

Description : Explain I.S. classification of soil

Last Answer : I.S. classification of soil: The soils are classified by Indian standard code i.e. IS 1498:1970 into three categories. 1.Coarse grained soil: In these soils, more than half ... , concretions, cinders and other non-soil materials in sufficient quantities are grouped under this category.

Explain Atterberg’s limits of consistency with neat sketch.

Description : Explain Atterberg’s limits of consistency with neat sketch.

Last Answer : Atterberg's Limit of consistency: Liquid limit (WL): It is minimum water content at which two separated grooved soil parts mixed together under 25 blows of casagrande's liquid limit apparatus; is ... volume of soil due to further decrease in water content is termed as shrinkage limit.

Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer.

Description : Define specific gravity of soil. Explain the stepwise procedure of determination of specific gravity of soil by pycnometer. 

Last Answer : Specific Gravity: It is ratio of unit weight in air of a given volume of soil solids at a specific temperature to unit weight in air of an equal volume of distilled water at same temperature. ... Repeat all above steps two more times to calculate average specific gravity of given soil sample.

Explain modified proctor test with sketch.

Description : Explain modified proctor test with sketch.

Last Answer : Procedure: i. Take about 5 Kg. of de-aired soil passing through sieve 20 mm in tray. ii. Add about 4% water (approximately 120 ml.) to the soil and mix thoroughly with trowel and cover it ... degree of saturation corresponding to the maximum dry density as OMC and MDD of given soil sample. 

Explain with neat sketch particle size distribution curve.

Description : Explain with neat sketch particle size distribution curve.

Last Answer : Particle size distribution curve (PSDC) is the semi log graph drawn as sieve size versus % finer of given soil sample. The PSDC is useful for grading of soil i.e. classification of ... : When graph is of wavy nature indicating particles of only specific size and deficiency of other sizes. 

Explain three phase system of soil.

Description : Explain three phase system of soil.

Last Answer : As natural soil contains solid soil particles and water and air present in its voids such complex nature of soil sample is difficult to analyze its physical properties hence it is simplify and ... water. In case of partially saturated soil, both air and water are present in the voids.

State and explain any four field applications of Geotechnical Engineering.

Description : State and explain any four field applications of Geotechnical Engineering.

Last Answer : Field applications of Geotechnical Engineering are as follows:  1. Design of foundation for various structures: Foundation is required to transfer the load of super structure to foundation soil and to ... of beds. GTE is necessary to study shear strength, permeability of soil for such structure.

State the step by step procedure for determination of OMC and MDD using standard proctor test and explain compaction curve.

Description : State the step by step procedure for determination of OMC and MDD using standard proctor test and explain compaction curve. 

Last Answer : Procedure: 1. Take about 5 Kg. of de-aired soil passing through sieve 20mm in tray. 2. Add about 4% water (approximately 120ml) to the soil and mixed thoroughly with trowel and cover it ... decreases. Since there is formation of double layer of water around soil particles in the same volume.