What are examples of mass frame and shell structures?

What are examples of mass frame and shell structures?
by

1 Answer

Answer :

Feel Free to Answer
by

Related questions

What are examples of natural frame structures?

Description : What are examples of natural frame structures?

Last Answer : Natural frame structures include coral, trees, spider webs andskeletons.

What type of structure is glasss frame shell mass?

Description : What type of structure is glasss frame shell mass?

Last Answer : Need answer

What kind of structure is an igloo, frame, mass, or shell?

Description : What kind of structure is an igloo, frame, mass, or shell?

Last Answer : shell because it is hollow and therefore represents the form of a shell which is also recognized as a shell structure

For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea(C) Sand(D) Rotary vacuum

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

Which of the following is a continuous filter? (A) Plate and frame filter (B) Cartridge filter (C) Shell and leaf filter(D) None of these

Description : Which of the following is a continuous filter? (A) Plate and frame filter (B) Cartridge filter (C) Shell and leaf filter (D) None of these

Last Answer : (D) None of these

Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost(B) Facilitates filtration under higher pressure(C) Provides more effective washing(D) All (A), (B) & (C)

Description : Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost (B) Facilitates filtration under higher pressure (C) Provides more effective washing (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

How many of the following are examples of homologus structures in plant : (a) Eyes of octapus and mammal (b) Potato and weet potato (c) Forelimbs of w

Description : How many of the following are examples of homologus structures in plant : (a) Eyes of octapus and mammal (b) Potato and weet potato (c) Forelimbs of w

Last Answer : How many of the following are examples of homologus structures in plant : (a) Eyes of octapus and mammal (b) ... radish A. Four B. Three C. Two D. One

What are two examples of types of body structures that provide evidence of a common ancestor among diverse organism's?

Description : What are two examples of types of body structures that provide evidence of a common ancestor among diverse organism's?

Last Answer : What is the answer ?

Generality is the measure of _____________ a) Ease with which the method can be adapted to different domains of application b) The average time required to construct the target knowledge structures from some specified initial structures c) A learning system to function with unreliable feedback and with a variety of training examples d) The overall power of the system

Description : Generality is the measure of _____________ a) Ease with which the method can be adapted to different domains of application b) The average time required to construct the target knowledge structures ... unreliable feedback and with a variety of training examples d) The overall power of the system

Last Answer : a) Ease with which the method can be adapted to different domains of application

The supportive skeletal structures in the human external ears and in the nose tip are examples of (a) ligament (b) areolar tissue (c) bone (d) cartilage.

Description : The supportive skeletal structures in the human external ears and in the nose tip are examples of (a) ligament (b) areolar tissue (c) bone (d) cartilage.

Last Answer : (d) cartilage.

The mass of an electron in motion depends upon - (1) Direction of motion (2) B its velocity (3) C its velocity of e- (4) D it’s shell number

Description : The mass of an electron in motion depends upon - (1) Direction of motion (2) B its velocity (3) C its velocity of e- (4) D it’s shell number

Last Answer : (2) B its velocity Explanation: The electron has a mass that is approximately 1/1836 that of the proton. Quantum mechanical properties of the electron include an intrinsic angular momentum (spin) of a half-integer value, expressed in units of the reduced Planck constant, ħ.

Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Description : Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) Decreases the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Description : For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) ... the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Last Answer : (C) Increases the overall heat transfer coefficient

Pick up the correct statement from the following: (A) For thin structures subjected to wetting and drying, the water cement ratio should be 0.45 (B) For mass concrete structures subjected to wetting and drying, the water ratio should be 0.55 (C) For thin structures which remain continuously under water, the water-cement ratio by weight should be 0.55 (D) All the above

Description : Pick up the correct statement from the following: (A) For thin structures subjected to wetting and drying, the water cement ratio should be 0.45 (B) For mass concrete structures subjected to wetting and ... under water, the water-cement ratio by weight should be 0.55 (D) All the above

Last Answer : Answer: Option D