Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost(B) Facilitates filtration under higher pressure(C) Provides more effective washing(D) All (A), (B) & (C)

Shell and leaf filter as compared to plate and frame filter
(A) Entails less labor cost
(B) Facilitates filtration under higher pressure
(C) Provides more effective washing
(D) All (A), (B) & (C)
by

1 Answer

Answer :

(D) All (A), (B) & (C)
by

Related questions

Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Last Answer : (A) Open sand

Which of the following is a continuous filter? (A) Plate and frame filter (B) Cartridge filter (C) Shell and leaf filter(D) None of these

Description : Which of the following is a continuous filter? (A) Plate and frame filter (B) Cartridge filter (C) Shell and leaf filter (D) None of these

Last Answer : (D) None of these

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Description : Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea(C) Sand(D) Rotary vacuum

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Description : In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Last Answer : (B) 1/4

For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Description : For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Last Answer : (A) Gravity sand

Gelatinous solid (which plug the septum) can be filtered by a __________ filter. (A) Sparkler (B) Plate and frame (C) Vacuum leaf (D) Pre-coat

Description : Gelatinous solid (which plug the septum) can be filtered by a __________ filter. (A) Sparkler (B) Plate and frame (C) Vacuum leaf (D) Pre-coat

Last Answer : (D) Pre-coat

During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Description : During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Last Answer : (B) At the end of filtration

Tank filter (e.g., Nutsche filter) is (A) A high pressure filter (B) A continuous filter (C) Used for small scale filtration work (D) A leaf filter

Description : Tank filter (e.g., Nutsche filter) is (A) A high pressure filter (B) A continuous filter (C) Used for small scale filtration work (D) A leaf filter

Last Answer : (C) Used for small scale filtration work

The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Description : The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Last Answer : (B) Sand

__________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Description : __________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Last Answer : (C) Pressure filter thickener

Which of the following is a pressure filter? (A) Leaf filter (Moore filter) (B) Plate and flame filter

Description : Which of the following is a pressure filter? (A) Leaf filter (Moore filter) (B) Plate and flame filter

Last Answer : (B) Plate and flame filter

Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Description : Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Last Answer : Factors which affect the rate of filtration are:   1. Pressure: The rate of filtration of liquid is directly proportional to the pressure difference between the filter medium and filter cake. Thus, the ... cake increases which decreases the rate of filtration.  Diagram of leaf filter :

In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Description : In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Last Answer : (A) Gives a higher shell side pressure drop

Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Description : Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Last Answer : (B) Cast iron

For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Last Answer : (C) Centrifugal

In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Description : In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Last Answer : (C) Laminar

Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Description : Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Last Answer : (C) Ribbed

Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Last Answer : (A) Plate and frame filter

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Description : Flow of filtrate through the cake in a plate and frame filter press is best described by the __________ equation. (A) Kozeny-Carman (B) Hagen-Poiseuille’s (C) Fanning's (D) Kremser

Last Answer : (A) Kozeny-Carman

Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron

Last Answer : (B) Cast iron

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

High plasma protein binding: A. Increases volume of distribution of the drug B. Facilitates glomerular filtration of the drug C. Minimises drug interactions D. Generally makes the drug long acting

Description : High plasma protein binding: A. Increases volume of distribution of the drug B. Facilitates glomerular filtration of the drug C. Minimises drug interactions D. Generally makes the drug long acting

Last Answer : D. Generally makes the drug long acting

High plasma protein binding: A. Increases volume of distribution of the drug B. Facilitates glomerular filtration of the drug C. Minimises drug interactions D. Generally makes the drug long acting

Description : High plasma protein binding: A. Increases volume of distribution of the drug B. Facilitates glomerular filtration of the drug C. Minimises drug interactions D. Generally makes the drug long acting

Last Answer : D. Generally makes the drug long acting

High plasma protein binding: A. Increases volume of distribution of the drug B. Facilitates glomerular filtration of the drug C. Minimises drug interactions D. Generally makes the drug long acting

Description : High plasma protein binding: A. Increases volume of distribution of the drug B. Facilitates glomerular filtration of the drug C. Minimises drug interactions D. Generally makes the drug long acting

Last Answer : D. Generally makes the drug long acting

In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Description : In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Last Answer : (A) Square root of the velocity

A concentric double pipe heat exchanger as compared to the shell and tube heat exchanger for the same heat load requires (A) Less heating surface (B) More space (C) Lower maintenance cost (D) None of these

Description : A concentric double pipe heat exchanger as compared to the shell and tube heat exchanger for the same heat load requires (A) Less heating surface (B) More space (C) Lower maintenance cost (D) None of these

Last Answer : (B) More space

Stacked packing compared to dumped packing (A) Provides poorer contact between the fluids (B) Gives lower pressure drop (C) Both (A) and (B) (D) Gives higher pressure drop

Description : Stacked packing compared to dumped packing (A) Provides poorer contact between the fluids (B) Gives lower pressure drop (C) Both (A) and (B) (D) Gives higher pressure drop

Last Answer : (C) Both (A) and (B)

Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Description : Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Last Answer : (B) Occupy more space

Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Description : Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Description : Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Last Answer : (C) Increase the porosity of the cake

. In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Description : . In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Last Answer : (C) Deplugging the filter medium

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Description : Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Last Answer : (B) More

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of colloidal particle is less than filter paper pores.

Description : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of colloidal particle is less than filter paper pores.

Last Answer : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of ... D. If both Assertion & Reason are False.

Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter(A) Filtering(B) Washing(C) Drying(D) All (A), (B) & (C).

Description : Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter. (A) Filtering (B) Washing (C) Drying (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Which of the following is not true of a consular invoice? A. provides customs officials with all information B. facilitates easy customs clearance C. helps customs officials assess duties D. issued by the consulate of the exporting country E. it is not a title to the goods

Description : Which of the following is not true of a consular invoice? A. provides customs officials with all information B. facilitates easy customs clearance C. helps customs officials assess duties D. issued by the consulate of the exporting country E. it is not a title to the goods

Last Answer : D. issued by the consulate of the exporting country

Which one of the following is NOT a benefit of multiple packaging? A)Facilitates special price offers B)Increases demand C)Increases consumer acceptance of the product D)Makes handling or storage easier E)Provides an overall image of the firm

Description : Which one of the following is NOT a benefit of multiple packaging? A)Facilitates special price offers B)Increases demand C)Increases consumer acceptance of the product D)Makes handling or storage easier E)Provides an overall image of the firm

Last Answer : E)Provides an overall image of the firm

Which of the following statements are correct about the National Advisory Council (NAC) ? 1. The National Advisory Council is a statutory body. 2. It is headed by the Prime Minister of India. 3. It facilitates constant interaction with the leaders of civil society. 4. It provides policy and legislative inputs to the Government of India. Select the correct answer from the code given below : Codes : (A) 1, 2 and 3 (B) 2, 3 and 4 (C) 1, 3 and 4 (D) 3 and 4

Description : Which of the following statements are correct about the National Advisory Council (NAC) ? 1. The National Advisory Council is a statutory body. 2. It is headed by the Prime Minister of India. 3. It facilitates constant interaction with the ... 1, 2 and 3 (B) 2, 3 and 4 (C) 1, 3 and 4 (D) 3 and 4

Last Answer : Answer: D 

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases(B) Increases linearly(C) Decreases(D) Is not affected

Description : With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases (B) Increases linearly (C) Decreases (D) Is not affected

Last Answer : (A) Increases

Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Description : Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Last Answer : (A) Early stages