Tunneling _____________ to the fold axis is not at all desirable. (A) Perpendicular (B) Parallel (C) None of these

Tunneling _____________ to the fold axis is not at all desirable. (A) Perpendicular (B) Parallel (C) None of these
by

1 Answer

Answer :

(A) Perpendicular 
by

Related questions

Most suitable rocks for construction of tunneling: (A) Argillaceous S.st (B) Vesicular or amygdaloidal basalts (C) Limestone (D) Schist & Phyllite

Description : Most suitable rocks for construction of tunneling: (A) Argillaceous S.st (B) Vesicular or amygdaloidal basalts (C) Limestone (D) Schist & Phyllite

Last Answer : (B) Vesicular or amygdaloidal basalts 

In translational slides, movement _______ to planes of weakness and occasionally _____to slope. (A) Parallel, parallel (B) Parallel, perpendicular (C) Perpendicular, parallel (D) Perpendicular, perpendicular

Description : In translational slides, movement _______ to planes of weakness and occasionally _____to slope. (A) Parallel, parallel (B) Parallel, perpendicular (C) Perpendicular, parallel (D) Perpendicular, perpendicular

Last Answer : (A) Parallel, parallel 

The beds which have a gentle upstream dip will be_______ to the resultant force (R), hence can provides the best resistance to withstand the stresses or loads acting in the area. (A) Parallel (B) Perpendicular (C) None of these

Description : The beds which have a gentle upstream dip will be_______ to the resultant force (R), hence can provides the best resistance to withstand the stresses or loads acting in the area. (A) Parallel (B) Perpendicular (C) None of these 

Last Answer : (B) Perpendicular  

Which of the following is the suitable location for the construction of dams in a folded terrain? (A) Crest of the fold (B) Trough of the fold (C) Limbs of the fold (D) None of these

Description : Which of the following is the suitable location for the construction of dams in a folded terrain? (A) Crest of the fold (B) Trough of the fold (C) Limbs of the fold (D) None of these

Last Answer : (C) Limbs of the fold 

What type of drainage pattern would you expect to find where the main streams are parallel and very long and the edge of the folded sedimentary rock (weak and resistant) forms long parallel belts? (A) Dendritic (B) Rectangular (C) Radial (D) Trellised

Description : What type of drainage pattern would you expect to find where the main streams are parallel and very long and the edge of the folded sedimentary rock (weak and resistant) forms long parallel belts? (A) Dendritic (B) Rectangular (C) Radial (D) Trellised

Last Answer : (D) Trellised 

Fine parallel lines, or striations, are most likel to be seen on a cleavage surface of which of the following minerals? w) quartz x) orthoclase y) hornblende z) plagioclase (pron: play-gee-o-klase)

Description : Fine parallel lines, or striations, are most likel to be seen on a cleavage surface of which of the following minerals? w) quartz x) orthoclase y) hornblende z) plagioclase (pron: play-gee-o-klase)

Last Answer : ANSWER: Z -- PLAGIOCLASE

Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Last Answer : b.Parallel

Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area c.Same as moment of inertia d.The moment of inertia for an area relative to a line or axis parallel to the centroidal axis e.The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Longitudinal vibrations are said to occur when the particles of a body moves A Perpendicular to its axis B Parallel to its axis C In a circle about its axis D None of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves A Perpendicular to its axis B Parallel to its axis C In a circle about its axis D None of the mentioned

Last Answer : B Parallel to its axis

Longitudinal vibrations are said to occur when the particles of a body moves (A) Perpendicular to its axis B (B) Parallel to its axis (C) In a circle about its axis (D) None of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves (A) Perpendicular to its axis B (B) Parallel to its axis (C) In a circle about its axis (D) None of the mentioned

Last Answer : (B) Parallel to its axis

Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Last Answer : b) parallel to its axis

Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Description : Longitudinal vibrations are said to occur when the particles of a body moves a) perpendicular to its axis b) parallel to its axis c) in a circle about its axis d) none of the mentioned

Last Answer : b) parallel to its axis

Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The internal surface of the mould is kept clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Description : Pick up the incorrect statement from the following: (A) The bottom and top ends of slump mould are parallel to each other (B) The axis of the mould is perpendicular to the end faces (C) The ... clean and free from set cement (D) The mould is in the form of a frustum of hexagonal pyramid

Last Answer : Answer: Option D

If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Description : If used, in which direction should pinholes be placed? a. parallel to the long axis of the tooth b.parallel to the nearest external surface c. at a 15 degree angle to the long axis of the tooth d. perpendicular to the gingival floor e. directly below and parallel to restored cusp tip

Last Answer : b.parallel to the nearest external surface

The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Description : The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Last Answer : GA.Parallel to occlusal plane

State the parallel axis theorem and perpendicular axis theorem.

Description : State the parallel axis theorem and perpendicular axis theorem.

Last Answer : Parallel axis theorem: It states that the M. I. of a plane section about any axis parallel to the centroidal axis is equal to the M. I. of the section about the centroidal axis plus the ... the lamina is equal to the addition of the moments of inertia of the lamina about its centroidal axes.

is this statement true or false If you fold the paper so that A matches up with B and then creases the paper, the line formed by the crease is the perpendicular bisector of AB.?

Description : is this statement true or false If you fold the paper so that A matches up with B and then creases the paper, the line formed by the crease is the perpendicular bisector of AB.?

Last Answer : 1

For routine cleaning of a commutator, you should apply _____________. A. course sandpaper in a slow back and forth motion across the commutator slots B. an emery cloth parallel to the axis of the machine C. a canvas wiper to the machine while running D. cotton swabs between the commutator bars

Description : For routine cleaning of a commutator, you should apply _____________. A. course sandpaper in a slow back and forth motion across the commutator slots B. an emery cloth parallel to the axis of the machine C. a canvas wiper to the machine while running D. cotton swabs between the commutator bars

Last Answer : Answer: C

When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold

Description : When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold

Last Answer : Answer: C

Where does moraine form- —

Description : Where does moraine form- —

Last Answer : Glacial region

…………….. refers to the collection of information pertinent to systems Project. A) Data transfer B) Data gathering C) Data Embedding D) Data Request

Description : …………….. refers to the collection of information pertinent to systems Project. A) Data transfer B) Data gathering C) Data Embedding D) Data Request

Last Answer : B) Data gathering

Consequences of the Earth's Rotation

Description : Consequences of the Earth's Rotation

Last Answer : The earth rotates rotates on its axis taking approximately approximately 24 hours to complete complete one rotation. rotation. This has important environmental consequences. 1. Rotation creates a diurnal ... of water in the oceans called gyres. The Coriolis force only operates on large features.

From which of the following factor has not influence the drainage density: (A) Climate (B) Topography (C) Soil infiltration capacity (D) Anthropogenic activity (E) Vegetation (F) Geology

Description : From which of the following factor has not influence the drainage density: (A) Climate (B) Topography (C) Soil infiltration capacity (D) Anthropogenic activity (E) Vegetation (F) Geology

Last Answer : (D) Anthropogenic activity 

The volume rate of flow of water at a point in a given time is: (A) Competence (B) Viscosity (C) Discharge (D) Capacity

Description : The volume rate of flow of water at a point in a given time is: (A) Competence (B) Viscosity (C) Discharge (D) Capacity

Last Answer : (C) Discharge 

Which of the following is not one of the three broad types of channel pattern? (A) Straight (B) Serrated (C) Braided (D) Meandering

Description : Which of the following is not one of the three broad types of channel pattern? (A) Straight (B) Serrated (C) Braided (D) Meandering

Last Answer : (B) Serrated 

Terraces are remnants of former: (A) Rivers (B) Alluvial fans (C) Floodplains (D) None of these

Description : Terraces are remnants of former: (A) Rivers (B) Alluvial fans (C) Floodplains (D) None of these

Last Answer : (C) Floodplains 

Which of the following is not one of the channel pattern? (A) Braided (B) Narrow (C) Meandering (D) Straight

Description : Which of the following is not one of the channel pattern? (A) Braided (B) Narrow (C) Meandering (D) Straight

Last Answer : (B) Narrow 

Subsidence results due to the constant or excess removal of ground water deplete the water table and increases the area of ____________. (A) Water table (B) Ground surface (C) Zone of saturation (D) Vadose zone

Description : Subsidence results due to the constant or excess removal of ground water deplete the water table and increases the area of ____________. (A) Water table (B) Ground surface (C) Zone of saturation (D) Vadose zone

Last Answer : (D) Vadose zone 

________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Description : ________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Last Answer : (A) Rockfalls  

Which one of the following is not an internal factor affects in slope processes? (A) Lithology of the materials on the slope (B) Ground water or rain water (run off) (C) Geological Structures (D) Earthquakes (Tectonic activity)

Description : Which one of the following is not an internal factor affects in slope processes? (A) Lithology of the materials on the slope (B) Ground water or rain water (run off) (C) Geological Structures (D) Earthquakes (Tectonic activity)

Last Answer : (D) Earthquakes (Tectonic activity) 

Which of the following is not depends on shear strength of the material? (A) Cohesion (B) Internal friction (C) Normal stress (D) Mass of the material

Description : Which of the following is not depends on shear strength of the material? (A) Cohesion (B) Internal friction (C) Normal stress (D) Mass of the material

Last Answer : (D) Mass of the material 

Driving force can be increased by: (A) Decrease in amount of material on slope (B) Increase in slope angle (C) Decrease in slope angle (D) None of these

Description : Driving force can be increased by: (A) Decrease in amount of material on slope (B) Increase in slope angle (C) Decrease in slope angle (D) None of these

Last Answer : (B) Increase in slope angle 

Abrupt uplift and gentle subsidence are indicative of: (A) Hat microatoll (B) Hemispherical coral head (C) Cup microatoll (D) Cylindrical coral head

Description : Abrupt uplift and gentle subsidence are indicative of: (A) Hat microatoll (B) Hemispherical coral head (C) Cup microatoll (D) Cylindrical coral head

Last Answer : (C) Cup microatoll  

What is the subsidence occurred at Great Nicobar Island due to 2004 Sumatra-Andaman earthquake? (A) 5 m (B) 3 m (C) 10 m (D) None of these

Description : What is the subsidence occurred at Great Nicobar Island due to 2004 Sumatra-Andaman earthquake? (A) 5 m (B) 3 m (C) 10 m (D) None of these

Last Answer : (B) 3 m 

What is the rupture length of 2004 Sumatra-Andaman earthquake? (A) 500 km (B) 5000 km (C) 1200 km (D) None of these

Description : What is the rupture length of 2004 Sumatra-Andaman earthquake? (A) 500 km (B) 5000 km (C) 1200 km (D) None of these

Last Answer : (C) 1200 km 

Which is the largest subduction earthquake? (A)1960 Chile earthquake (B) 1905 Kangra earthquake (C) 2011 Tohuku earthquake (D)2004 Sumatra-Andaman earthquake

Description : Which is the largest subduction earthquake? (A)1960 Chile earthquake (B) 1905 Kangra earthquake (C) 2011 Tohuku earthquake (D)2004 Sumatra-Andaman earthquake

Last Answer : (A)1960 Chile earthquake  

Tsunami waves are generated with the earthquake. True or false. (A) False (B) True (C) None of these

Description : Tsunami waves are generated with the earthquake. True or false. (A) False (B) True (C) None of these

Last Answer : (B) True 

Taksal fault is an example of: (A) Normal fault (B) Reverse fault (C) Strike slip fault (D) None of these

Description : Taksal fault is an example of: (A) Normal fault (B) Reverse fault (C) Strike slip fault (D) None of these

Last Answer : (C) Strike slip fault 

The displaced aqueduct of Al Harif is in between ________ and _________ plates. (A) African plate and Arabian plate (B) Indian plate and Eurasian plate (C) African plate and Pacific plate (D) None of these

Description : The displaced aqueduct of Al Harif is in between ________ and _________ plates. (A) African plate and Arabian plate (B) Indian plate and Eurasian plate (C) African plate and Pacific plate (D) None of these 

Last Answer : (A) African plate and Arabian plate 

Which type of movement has been seen in right lateral strike-slip fault? (A) Sinistral movement (B) Dextral movement (C) Upward movement (D) None of these

Description : Which type of movement has been seen in right lateral strike-slip fault? (A) Sinistral movement (B) Dextral movement (C) Upward movement (D) None of these

Last Answer : (B) Dextral movement  

Sag pond is an example of : (A) Normal fault (B) Reverse fault (C) Strike slip fault (D) None of these

Description : Sag pond is an example of : (A) Normal fault (B) Reverse fault (C) Strike slip fault (D) None of these

Last Answer : (C) Strike slip fault 

2005 Muzaffarabad earthquake was occurred on _______ active fault. (A) Kangra Active fault (B) San Andreas fault (C) Main Boundary thrust (D) Tanda Active fault

Description : 2005 Muzaffarabad earthquake was occurred on _______ active fault. (A) Kangra Active fault (B) San Andreas fault (C) Main Boundary thrust (D) Tanda Active fault 

Last Answer : (D) Tanda Active fault 

1995 Kobe earthquake was occurred in ________. (A) Japan (B) United States of America (C) Taiwan (D) India

Description : 1995 Kobe earthquake was occurred in ________. (A) Japan (B) United States of America (C) Taiwan (D) India

Last Answer : (A) Japan 

Point on fault plane where slip initiated is termed as: (A) Epicenter (B) Hypocenter (C) Fault scarp (D) Hanging wall

Description : Point on fault plane where slip initiated is termed as: (A) Epicenter (B) Hypocenter (C) Fault scarp (D) Hanging wall

Last Answer : (B) Hypocenter 

The San Andreas Fault is an example of: (A) Normal fault (B) Reverse fault (C) Right lateral strike slip (D) Left lateral strike slip

Description : The San Andreas Fault is an example of: (A) Normal fault (B) Reverse fault (C) Right lateral strike slip (D) Left lateral strike slip

Last Answer : (C) Right lateral strike slip  

Now India is divided into ____________ seismic zones. (A) 5 (B) 3 (C) 6 (D) 4

Description : Now India is divided into ____________ seismic zones. (A) 5 (B) 3 (C) 6 (D) 4

Last Answer : (D) 4

Surface along which the block of rock slip is called _____? (A) Fault zone (B) Fault Plane (C) Fault scarp (D) None of these

Description : Surface along which the block of rock slip is called _____? (A) Fault zone (B) Fault Plane (C) Fault scarp (D) None of these

Last Answer : (B) Fault Plane 

_______ is the angle of a fault plane w.r.t. vertical. (A) Hade (B) Throw (C) Heave (D) Dip

Description : _______ is the angle of a fault plane w.r.t. vertical. (A) Hade (B) Throw (C) Heave (D) Dip

Last Answer : (A) Hade 

In which type of the fault the hanging wall is moving up with respect to foot wall? (A) Normal fault (B) Strike slip fault (C) Reverse fault (D) None of these

Description : In which type of the fault the hanging wall is moving up with respect to foot wall? (A) Normal fault (B) Strike slip fault (C) Reverse fault (D) None of these

Last Answer : (C) Reverse fault