Consider the following pre-conditions for correct use of a theodolite: 1. The vertical axis need not be perpendicular to the plane of the plate level bubble. 2. The line of sight must be perpendicular to the horizontal axis. 3. The axis of the level tube attached to the telescope need not be parallel to the line of sight. 4. The vertical axis, the horizontal axis and the line of sight should all pass through a point known as stadia centre. Which of these conditions is/are necessary? (a) 1, 2, 3 & 4 (b) 2 only (c) 3 only (d) 1 & 4 only

Consider the following pre-conditions for correct use of a theodolite:
1. The vertical axis need not be perpendicular to the plane of the plate level bubble.
2. The line of sight must be perpendicular to the horizontal axis.
3. The axis of the level tube attached to the telescope need not be parallel to the line
of sight.
4. The vertical axis, the horizontal axis and the line of sight should all pass through
a point known as stadia centre.
Which of these conditions is/are necessary?
(a) 1, 2, 3 & 4 (b) 2 only (c) 3 only (d) 1 & 4 only
by

1 Answer

Answer :

(b) 2 only
by

Related questions

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Description : When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Last Answer : (A) Line of sight is horizontal

In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (A) Line of sight

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Description : In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Last Answer : e) Either of c or d above*

In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Description : In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

The diaphragm of a stadia theodolite is fitted with two additional (A) Horizontal hairs (B) Vertical hairs (C) Horizontal and two vertical hairs (D) None of these

Description : The diaphragm of a stadia theodolite is fitted with two additional (A) Horizontal hairs (B) Vertical hairs (C) Horizontal and two vertical hairs (D) None of these

Last Answer : (A) Horizontal hairs

Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular of the vertical axis (c) Error due to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Description : Which of the following in theodolite work is imperfect adjustment of the instrument (a) Error due to line of collimation being perpendicular to the horizontal axis (b) Error due to axis not to perpendicular ... to imperfect graduation (d) Error due to eccentricity of vernires (e) All of the above*

Last Answer : (e) All of the above*

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

Pick up the correct statement from the following: (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit (B) When the vertical circle is to the left of the telescope during observation, it is called to be in left face (C) When the vertical circle is to the right of the telescope during observation, it is called to be in right face (D) All the above

Description : Pick up the correct statement from the following:  (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit  (B) When the vertical circle is to the left of ... the telescope during observation, it is called to be  in right face  (D) All the above 

Last Answer : (D) All the above 

Theodolite is an instrument used for (a) Tightening the capstan-headed nuts of level tube (b) Measurement of horizontal angles only (c) Measurement of vertical angles only (d) Measurement of both horizontal and vertical angles*

Description : Theodolite is an instrument used for (a) Tightening the capstan-headed nuts of level tube (b) Measurement of horizontal angles only (c) Measurement of vertical angles only (d) Measurement of both horizontal and vertical angles*

Last Answer : (d) Measurement of both horizontal and vertical angles*

The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at (A) Every point of the bubble (B) Either end of the bubble (C) The mid-point of the bubble (D) No where

Description : The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at  (A) Every point of the bubble  (B) Either end of the bubble  (C) The mid-point of the bubble  (D) No where

Last Answer : (C) The mid-point of the bubble 

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Description : If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Last Answer : (A) f/i

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

Define the following: (i) Height of instrument (i) Back sight (iii) Fore sight (iv) Axis of bubble tube

Description : Define the following: (i) Height of instrument (i) Back sight (iii) Fore sight (iv) Axis of bubble tube

Last Answer : i. Height of instrument: It is the reduced level of line of collimation when the leveling instrument is properly leveled. It is obtained by adding the BS reading to RL of bench mark or change point on which the ... when the bubble is at the center of its run i.e. at middle point of the tube.

The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Description : The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Last Answer : Answer: Option A

In a theodolite a condition arising when the image formed by the objective is not in the plane of cross hairs is known as (a) Parallax* (b) Out of sight (c) Out of place (d) Transiting

Description : In a theodolite a condition arising when the image formed by the objective is not in the plane of cross hairs is known as (a) Parallax* (b) Out of sight (c) Out of place (d) Transiting

Last Answer : (a) Parallax*

Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area c.Same as moment of inertia d.The moment of inertia for an area relative to a line or axis parallel to the centroidal axis e.The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Pick up the correct statement from the following: (A) A level surface is perpendicular at all points to the direction of gravity (B) A level line lies in level surface (C) A horizontal surface is normal to the direction of gravity at only one point (D) All the above

Description : Pick up the correct statement from the following:  (A) A level surface is perpendicular at all points to the direction of gravity  (B) A level line lies in level surface  (C) A horizontal surface is normal to the direction of gravity at only one point  (D) All the above 

Last Answer : (D) All the above 

The theodolites used for making tacheometric observations by optical wedge system, are (A) Provided with stadia hairs in front of eye piece (B) Not provided with stadia hairs at all (C) Fitted with a glass wedge inside the telescope (D) Fitted with a glass wedge in front of telescope

Description : The theodolites used for making tacheometric observations by optical wedge system, are (A) Provided with stadia hairs in front of eye piece (B) Not provided with stadia hairs at all (C) Fitted with a glass wedge inside the telescope (D) Fitted with a glass wedge in front of telescope

Last Answer : (D) Fitted with a glass wedge in front of telescope

Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Description : Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Last Answer : (C) Away from the telescope pointing up-hill

In horizontal angles, the error due to imperfect levelling of the plate bubble is (A) Large when sights are nearly level (B) Large for long sights (C) Less for steeply inclined sights (D) Large for steeply inclined sights

Description : In horizontal angles, the error due to imperfect levelling of the plate bubble is (A) Large when sights are nearly level (B) Large for long sights (C) Less for steeply inclined sights (D) Large for steeply inclined sights

Last Answer : (D) Large for steeply inclined sights

The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Description : The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Last Answer : (A) In the plane of cross hairs

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Description : The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Last Answer : (D) Both shimmering and horizontal refraction

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

Draw a circle with centre at point O and radius 5 cm. Draw its chord AB, draw the perpendicular bisector of line segment AB. Does it pass through the centre of the circle? -Maths 9th

Description : Draw a circle with centre at point O and radius 5 cm. Draw its chord AB, draw the perpendicular bisector of line segment AB. Does it pass through the centre of the circle? -Maths 9th

Last Answer : STEP1: Draw a circle with centre at point O and radius 5 cm. STEP2: Draw its cord AB. STEP3: With centre A as centre and radius more than half of AB, draw two arcs, one on each side ... is perpendicular bisector of AB which is chord of circle, Hence, it passes through the centre of the circle.

The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Description : The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Last Answer : (C) Dip

The electric field lines in a plane perpendicular to the earth’s surface. A. Elliptical polarization B. Circular polarization C. Horizontal polarization D. Vertical polarization

Description : The electric field lines in a plane perpendicular to the earth’s surface. A. Elliptical polarization B. Circular polarization C. Horizontal polarization D. Vertical polarization

Last Answer : D. Vertical polarization

The number of horizontal cross wires in a stadia diaphragm is (A) One (B) Two (C) Three (D) Four

Description : The number of horizontal cross wires in a stadia diaphragm is (A) One (B) Two (C) Three (D) Four

Last Answer : (C) Three

If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on (A) Staff normal (B) Staff vertical (C) Staff normal as well as vertical (D) None of these

Description : If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on (A) Staff normal (B) Staff vertical (C) Staff normal as well as vertical (D) None of these

Last Answer : (A) Staff normal

Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Description : Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Last Answer : Answer: Option D

The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Description : The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually

Last Answer : GA.Parallel to occlusal plane

For a floating body to be in equilibrium (A) Meta centre should be above e.g.(B) Centre of buoyancy and e.g. must lie on same vertical plane (C) A righting couple should be formed (D) All of the above

Description : For a floating body to be in equilibrium (A) Meta centre should be above e.g . (B) Centre of buoyancy and e.g. must lie on same vertical plane (C) A righting couple should be formed (D) All of the above

Last Answer : Answer: Option D

Describe the use of digital theodolite for measurement of horizontal and vertical angle.

Description : Describe the use of digital theodolite for measurement of horizontal and vertical angle.

Last Answer : I) Procedure for measurement of horizontal angle with digital theodolite: 1) Taking out digital theodolite for box and fix it on tripod over required station. 2) Approximate leveling by leg adjustment and ... and take the reading at B. 9) Difference of two angle gives required vertical angle AOB

The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Description : The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Last Answer : d. All the above

Centering error of a theodolite produces an error (A) In all angles equally (B) Which does not vary with the direction or pointing (C) Which varies with the direction of pointing and inversely with the length of sight (D) None of these

Description : Centering error of a theodolite produces an error (A) In all angles equally (B) Which does not vary with the direction or pointing (C) Which varies with the direction of pointing and inversely with the length of sight (D) None of these 

Last Answer : (C) Which varies with the direction of pointing and inversely with the length of sight 

The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Last Answer : a.Rotation

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is in the plane of incidence, vertical polarisation is formed (C) When the electric vector is at right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Description : Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is ... right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Last Answer : Answer: Option D

The M.I. of hollow circular section about a central axis perpendicular to section as compared to its M.I. about horizontal axis is (A) Same (B) Double (C) Half (D) Four times

Description : The M.I. of hollow circular section about a central axis perpendicular to section as compared to its M.I. about horizontal axis is (A) Same (B) Double (C) Half (D) Four times

Last Answer : (B) Double

The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of gradient and the foot of the staff (B) Twice the distance between the zero of graduation and the foot of the staff (C) Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff

The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Description : The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Last Answer : (B) Telescopic alidade