What nonmetals in the solid state are poor conductors of heat tend to?

What nonmetals in the solid state are poor conductors of heat tend to?
by

1 Answer

Answer :

Nonmetals in the solid state tend to be brittle and poorconductors of heat.
by
selected by

Related questions

Which one of the following best defines the word “allotropes”? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between those of metals and nonmetals D Atoms of a given atomic number that have a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Description : Which one of the following best defines the word allotropes ? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between ... a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Last Answer : A Different structural forms of an element 

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Which one of the following nonmetals shows allotropy in the liguid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Description : Which one of the following nonmetals shows allotropy in the liguid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Last Answer : (2) Sulphur Explanation: Sulphur is a non-metal that shows allotropy in the liquid state. If sulphur is heated slowly the changes between the different forms can be observed. These changes are in the ... of cold water, plastic sulphur is formed. This is an elastic, rubber-like form of sulphur.

Which one of the following nonmetals shows allotropy in the liquid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Description : Which one of the following nonmetals shows allotropy in the liquid state? (1) Carbon (2) Sulphur (3) Phosphorous (4) Bromine

Last Answer : Sulphur

Why is it that people tend to respect the rich rather than the poor?

Description : Why is it that people tend to respect the rich rather than the poor?

Last Answer : answer:Welcome to Fluther :) To many people, the rich seem to be an elite group of people. They often get special treatment. Many times, it seems the laws of the land are more lax for the wealthy. ... people ..are other rich people (and young adults). My answer is brief as I need to leave shortly.

Which of the following is false? (1) Most carbon compounds are poor conductors of electricity. (2) The force of attraction between carbon molecules is not very strong. (3) The atomic number of carbon is 6. (4) The earth’s crust has about 2% carbon in the form of minerals.

Description : Which of the following is false? (1) Most carbon compounds are poor conductors of electricity. (2) The force of attraction between carbon molecules is not very strong. (3) The atomic number of carbon is 6. (4) The earth’s crust has about 2% carbon in the form of minerals.

Last Answer : (4) The earth’s crust has about 2% carbon in the form of minerals.

Why are covalent compounds poor conductors of electricity? (1) Due to the presence of charged particles. (2) Due to the absence of charged particles. (3) Due to the presence of a triple bond. (4) None of the above

Description : Why are covalent compounds poor conductors of electricity? (1) Due to the presence of charged particles. (2) Due to the absence of charged particles. (3) Due to the presence of a triple bond. (4) None of the above

Last Answer : (2) Due to the absence of charged particles. Explanation: In a covalent compound, electrons are shared between atoms. This leaves no free electrons and hence there and no charged particles. This leads to covalent compounds being poor conductors of electricity.

Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Description : Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of these is a characteristics of nonmetals?

Description : Which of these is a characteristics of nonmetals?

Last Answer : They are poor conductors

What Unlike metals many nonmetals are?

Description : What Unlike metals many nonmetals are?

Last Answer : Need answer

Why might a jewelry designer prefer to work with a metal rather than a nonmetals?

Description : Why might a jewelry designer prefer to work with a metal rather than a nonmetals?

Last Answer : Need answer

Do nonmetals gain electrons to become negative ions?

Description : Do nonmetals gain electrons to become negative ions?

Last Answer : Need answer

What and the difference between metals and nonmetals?

Description : What and the difference between metals and nonmetals?

Last Answer : A metal is a chemical element that is a good conductor of both electricity and heat and forms cations and ionic bonds with non-metals. Cations are usually formed by electron loss. They are classified as ... iron, cobalt, and nickel, and they are the only elements known to produce a magnetic field.

What is the most active group of nonmetals noble gases alkaline earth halogens alkali metals?

Description : What is the most active group of nonmetals noble gases alkaline earth halogens alkali metals?

Last Answer : The most active metals are alkali metals.The most active nonmetals are halogens.

Who has the most active group of nonmetals noble gases alkaline earth halogens alkali metals?

Description : Who has the most active group of nonmetals noble gases alkaline earth halogens alkali metals?

Last Answer : Kevin

What is the name ending for compounds made from a metal nonmetals and oxygen?

Description : What is the name ending for compounds made from a metal nonmetals and oxygen?

Last Answer : These compounds are oxides.

Are nonmetals least reactive?

Description : Are nonmetals least reactive?

Last Answer : Some are but the most reactive are also non-metals.

What is the name ending for compounds made from a metal nonmetals and oxygen?

Description : What is the name ending for compounds made from a metal nonmetals and oxygen?

Last Answer : These compounds are oxides.

Are nonmetals least reactive?

Description : Are nonmetals least reactive?

Last Answer : Some are but the most reactive are also non-metals.

Which is NOT a characteristic of emissivity?  A. It is high with most nonmetals  B. It is directly proportional to temperature  C. It is independent with the surface condition of the material  D. It is low with highly polished metals

Description : Which is NOT a characteristic of emissivity?  A. It is high with most nonmetals  B. It is directly proportional to temperature  C. It is independent with the surface condition of the material  D. It is low with highly polished metals

Last Answer : It is independent with the surface condition of the material

Which of the following chemical reactions does not lead to formation of a salt? w) Reaction of salts with acids. x) The reaction of base anhydrides with acid anhydrides. y) Action of water on oxides of nonmetals. z) Reaction of acid with base.

Description : Which of the following chemical reactions does not lead to formation of a salt? w) Reaction of salts with acids. x) The reaction of base anhydrides with acid anhydrides. y) Action of water on oxides of nonmetals. z) Reaction of acid with base.

Last Answer : ANSWER: Y -- ACTION OF WATER ON OXIDES OF NONMETALS. (If water reacts with oxides of nonmetals, an acid is formed.)

Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : Brittleness

The ……… consists of two conductors, where one is the inner conductor of solid copper -Technology

Description : The ……… consists of two conductors, where one is the inner conductor of solid copper -Technology

Last Answer : (c) Co-axial cable consists of two conductors which are parallel to each other, i.e. inner and outer conductor.

In direct cooled system using hydrogen both stator and rotor conductors are made (a) solid (b) hollow (c) perforated (d) any ofthe above

Description : In direct cooled system using hydrogen both stator and rotor conductors are made (a) solid (b) hollow (c) perforated (d) any ofthe above

Last Answer : (b) hollow

For a single phase overhead line having solid copper conductors of ...

Description : For a single phase overhead line having solid copper conductors of diameter 1 cm, spaced 60 cm between centers, the inductance in mH/km is?

Last Answer : For a single phase overhead line having solid copper conductors of diameter 1 cm, spaced 60 cm between centers, the inductance in mH/km is 0.05 + 0.2 ln (6010.5).

1. The Rajya Sabha can have a maximum strength of howmany members? 2. Which are the The best and the poorest conductors of heat respectively? 3. From which sector does the highest sector wise contribution to gross domestic saving comes? 4. Which State has the largest coastline in India? 5. The first Governor-General of India was appointed under the provisions of which act?

Description : 1. The Rajya Sabha can have a maximum strength of howmany members? 2. Which are the The best and the poorest conductors of heat respectively? 3. From which sector does the highest sector wise ... which things? 19. What is Crop rotation? 20. Whose ideas had Influenced Mahatma Gandhi's thought?

Last Answer : Answer : 1. 250 2. Silver (Ag), and lead (Pb) 3. Household sector 4. Gujarat 5. 1833 6. Literature 7. Reduce transpiration 8. 66 subjects 9. Cauvery 10. Sir Hugh Rose11. Gold 12. ... oil 17. Government of India Act, 1935 18. Wavelength and speed 19. Growing different crops-in succession 20. Tolstoy

Which are the The best and the poorest conductors of heat respectively? -Do You Know?

Description : Which are the The best and the poorest conductors of heat respectively? -Do You Know?

Last Answer : answer:

What three materials that are good conductors of heat?

Description : What three materials that are good conductors of heat?

Last Answer : Feel Free to Answer

Which are the The best and the poorest conductors of heat respectively?

Description : Which are the The best and the poorest conductors of heat respectively?

Last Answer : – Silver (Ag), and lead (Pb)

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

Which are the The best and the poorest conductors of heat respectively?

Description : Which are the The best and the poorest conductors of heat respectively?

Last Answer : Silver (Ag), and lead (Pb)

Ceramic materials are (A) Organic in nature (B) Stronger in compression than in tension (C) Always amorphous in nature (D) Always bad heat conductors

Description : Ceramic materials are (A) Organic in nature (B) Stronger in compression than in tension (C) Always amorphous in nature (D) Always bad heat conductors

Last Answer : (B) Stronger in compression than in tension

The best conductors of heat are A) Silver and Copper B) Lead and Mercury C) Iron and Tin D) Gold and Platinum

Description : The best conductors of heat are A) Silver and Copper B) Lead and Mercury C) Iron and Tin D) Gold and Platinum

Last Answer : A) Silver and Copper

A thermoelectric engine which consists of two dissimilar electric conductors connected at two junctions maintained at different temperatures, converts (a) Electric energy into heat energy [IES-2006] (b) Heat energy into electric energy (c) Mechanical work into electric energy (d) Electric energy into mechanical work

Description : A thermoelectric engine which consists of two dissimilar electric conductors connected at two junctions maintained at different temperatures, converts (a) Electric energy into heat energy [IES-2006] (b ... energy (c) Mechanical work into electric energy (d) Electric energy into mechanical work  

Last Answer : (b) Heat energy into electric energy  

Plastics are (A) Good conductors of heat. (B) Good conductors of electricity. (C) Bad conductors of electricity. (D) High density.

Description : Plastics are (A) Good conductors of heat. (B) Good conductors of electricity. (C) Bad conductors of electricity. (D) High density.

Last Answer : (C) Bad conductors of electricity.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Description : Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Last Answer : a.Limited material variety

Moderating material used in a thermal-reactor should be a (A) Good absorber of neutrons (B) Solid substance (C) Poor absorber of neutrons (D) None of these

Description : Moderating material used in a thermal-reactor should be a (A) Good absorber of neutrons (B) Solid substance (C) Poor absorber of neutrons (D) None of these

Last Answer : (C) Poor absorber of neutrons

Sooty and sulphurous smog formed due to combustion of fossil fuels particularly in winter, continues throughout the day and night. When the moist atmospheric air's water vapor condenses on the solid particles of smoke thereby forming smog (smoke + fog), it causes (A) Poor visibility due to sky darkening (B) Irritation in eyes (C) Respiratory trouble (D) All (A), (B) and (C)

Description : Sooty and sulphurous smog formed due to combustion of fossil fuels particularly in winter, continues throughout the day and night. When the moist atmospheric air's water vapor condenses on the solid particles of smoke thereby ... B) Irritation in eyes (C) Respiratory trouble (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

State the reason for the establishment of a "unit size" for conductors.

Description : State the reason for the establishment of a "unit size" for conductors.

Last Answer : To allow comparisons between conductors of different sizes and resistance.

Name the following: (a) A metal, which is preserved in kerosene. (b) A lustrous coloured non-metal. (c) A metal, which can melt while kept on palm. (d) A metal, which is a poor conductor of heat. -Chemistry

Description : Name the following: (a) A metal, which is preserved in kerosene. (b) A lustrous coloured non-metal. (c) A metal, which can melt while kept on palm. (d) A metal, which is a poor conductor of heat. -Chemistry

Last Answer : a) Sodium is preserved in kerosene. (b) Iodine is lustrous coloured non-metal. (c) Gallium. ‘ (d) Lead.

Formation of frost on evaporator in refrigerator (a) results in loss of heat due to poor heat transfer (b) increases heat transfer rate (c) decreases compressor power. (d) can be avoided by proper design

Description : Formation of frost on evaporator in refrigerator (a) results in loss of heat due to poor heat transfer (b) increases heat transfer rate (c) decreases compressor power. (d) can be avoided by proper design

Last Answer : Ans: a

Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat energy of gasoline/litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Description : Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat ... /litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Last Answer : Answer: a Explanation: Anti-knock characteristics of alcohol is good.

Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Description : Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Last Answer : Ans:(b)

Woollen cloth protects the body from cold because – (1) it is a good conductor of heat (2) it is a poor conductor of heat (3) external heat rays enter into the body through the woollen cloth (4) it reflects heat

Description : Woollen cloth protects the body from cold because – (1) it is a good conductor of heat (2) it is a poor conductor of heat (3) external heat rays enter into the body through the woollen cloth (4) it reflects heat

Last Answer : (2) it is a poor conductor of heat Explanation: It is just because woolen clothes have fibres and between those fibres air is trapped which reduces heat loss. It reduces heat loss because it is an insulator or poor conductor of heat.

Woollen cloth protects the body from cold because – (1) it is a good conductor of heat (2) it is a poor conductor of heat (3) external heat rays enter into the body through the woollen cloth (4) it reflects heat

Description : Woollen cloth protects the body from cold because – (1) it is a good conductor of heat (2) it is a poor conductor of heat (3) external heat rays enter into the body through the woollen cloth (4) it reflects heat

Last Answer : (2) it is a poor conductor of heat Explanation: It is just because woolen clothes have fibres and between those fibres air is trapped which reduces heat loss. It reduces heat loss because it is an insulator or poor conductor of heat.

Ice is packed in saw dust because – (1) saw dust will not get melted easily. (2) saw dust is poor conductor of heat. (3) saw dust is a good conductor of heat. (4) saw dust does not stick to the ice.

Description : Ice is packed in saw dust because – (1) saw dust will not get melted easily. (2) saw dust is poor conductor of heat. (3) saw dust is a good conductor of heat. (4) saw dust does not stick to the ice.

Last Answer : (2) saw dust is poor conductor of heat. Explanation: ice needs to absorb heat energy to melt and become water (called latent heat of fusion). Since saw-dust is a poor conductor of heat, it takes ... required heat energy. This allows ice to remain in solid state for more time when packed in saw dust.

Outside of cooking utensils are generally left black from below because – (1) it is difficult to clean daily. (2) black surface is a good conductor of heat. (3) black surface is a poor conductor of heat. (4) black surface is a good absorber of heat.

Description : Outside of cooking utensils are generally left black from below because – (1) it is difficult to clean daily. (2) black surface is a good conductor of heat. (3) black surface is a poor conductor of heat. (4) black surface is a good absorber of heat.

Last Answer : (4) black surface is a good absorber of heat. Explanation: The outside surface of a utensil used for heating is coated black so that it may absorb more heat and make heating quicker. This is because black surface is a good absorber of heat.

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Description : Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)