Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part

Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part
by

1 Answer

Answer :

a.Limited material variety
by

Related questions

Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Description : Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Last Answer : d.Stereolithography

____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Description : Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Last Answer : b.Tolerance

Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : c.Tool path generation

Which of the following is the last step of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Description : Which of the following is the last step of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Last Answer : d.Postprocessing

Which of the following is the firststep of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Description : Which of the following is the firststep of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Last Answer : a.3D Modeling

Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Description : Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Last Answer : d.Production line

Which of the following advantage does not possess by the rapid prototyping process over thetraditional prototyping process? a.It consumes less time b.Gives better quality c.Reduces product launch time d.It's cheaper

Description : Which of the following advantage does not possess by the rapid prototyping process over thetraditional prototyping process? a.It consumes less time b.Gives better quality c.Reduces product launch time d.It's cheaper

Last Answer : d.It's cheaper

For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Description : For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Last Answer : c.STL

Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Description : Which of the following RP technologies uses molten material as the starting material? a.Three-Dimensional Printing b.Fused-Deposition Modeling c.Stereolithography d.Selective Laser Sintering

Last Answer : c.Stereolithography

Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Description : Which of the following RP technologies uses powders as the starting material? a.Droplet Deposition Manufacturing b.Fused-Deposition Modeling c.Selective Laser Sintering d.Stereolithography

Last Answer : c.Selective Laser Sintering

From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Description : From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Last Answer : b.Independent movement of part between stations

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling

Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Description : Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Last Answer : d.Adobe Illustrator

What is the format for the prototyping machine file? a..prt b..slt c..stl d..iges

Description : What is the format for the prototyping machine file? a..prt b..slt c..stl d..iges

Last Answer : c..stl

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Last Answer : a.circular Interpolation – clockwise

Laminated Object Manufacturing (LOM) is developed by_______ a.Stratasys b.CAM-LEM c.Kira Corporation d.Cubic Technologies

Description : Laminated Object Manufacturing (LOM) is developed by_______ a.Stratasys b.CAM-LEM c.Kira Corporation d.Cubic Technologies

Last Answer : d.Cubic Technologies

From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Description : From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Last Answer : c.FDM

In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Description : In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : a.Subtractive process

The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Description : The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above

Description : From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above

Last Answer : d.All of the above

In “Product Life Cycle” a stage represents rapid growth of product sale known as_____. a.Saturation stage b.Mature stage c.Growth stage d.Introduction stage

Description : In “Product Life Cycle” a stage represents rapid growth of product sale known as_____. a.Saturation stage b.Mature stage c.Growth stage d.Introduction stage

Last Answer : c.Growth stage

Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Description : Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Last Answer : d.Injection molding

Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Description : Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Last Answer : c.Laser-Engineered Net Shaping

G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Description : G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Last Answer : b.Rapid Travel Positioning

Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Description : Process of converting STL file model in to layers is called________in RP a.chopping b.slicing c.cutting d.trimming

Last Answer : b.slicing

Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Last Answer : d.Shearing

Basal cell carcinoma is characterised by, a.Rapid growth and metastasis. b.Local cutaneous invasion. c. Inability to invade bone. d.Poor prognosis. e.Radiation resistance. f.Can not metastasise to the bone.

Description : Basal cell carcinoma is characterised by, a.Rapid growth and metastasis. b.Local cutaneous invasion. c. Inability to invade bone. d.Poor prognosis. e.Radiation resistance. f.Can not metastasise to the bone.

Last Answer : b.Local cutaneous invasion.

Basal cell carcinoma is characterised by, A. Rapid growth and metastasis B. Local cutaneous invasion C. Inability to invade bone D. Poor prognosis E. Radiation resistance F. Can not metastasise to the bon

Description : Basal cell carcinoma is characterised by, A. Rapid growth and metastasis B. Local cutaneous invasion C. Inability to invade bone D. Poor prognosis E. Radiation resistance F. Can not metastasise to the bon

Last Answer : B. Local cutaneous invasion

Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Description : Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Last Answer : b.Checking 3D CAD data

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Description : Which of the following is not Powder-Based RP system? a.Selective Laser Sintering (SLS) b.Solid Object Ultraviolet-Laser Printer (SOUP) c.Electron Beam Melting (EBM) d.Direct Metal Deposition (DMD)

Last Answer : b.Solid Object Ultraviolet-Laser Printer (SOUP)

Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)

Description : Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)

Last Answer : c.Electron Beam Melting (EBM)

Which of the following is not Liquid-based RP system? a.Stereolithography Apparatus (SLA) b.Laminated Object Manufacturing (LOM) c.Solid Ground Curing (SGC) d.Solid Object Ultraviolet-Laser Printer (SOUP

Description : Which of the following is not Liquid-based RP system? a.Stereolithography Apparatus (SLA) b.Laminated Object Manufacturing (LOM) c.Solid Ground Curing (SGC) d.Solid Object Ultraviolet-Laser Printer (SOUP

Last Answer : b.Laminated Object Manufacturing (LOM)

Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Description : Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Last Answer : c.Tooling

Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Description : The term that is used for geometric modelling like solid modelling, wire frame modellingand drafting is known as a.software package b.operating system c.application software d.none of the mentioned

Last Answer : a.software package

For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above

Description : Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above

Last Answer : c.boolean operations

From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Description : From the following, which method is also called as the Building Block Approach? a.Cellular Decomposition b.Spatial Occupancy Enumeration c.Generalized Sweeps d.Constructive Solid Geometry

Last Answer : d.Constructive Solid Geometry

Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Description : Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Last Answer : a.Solid model

B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Description : B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Last Answer : a.solid modeling

In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Description : In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Last Answer : d.Circle

In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Description : In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Last Answer : d.none of the above