The bob of a conical pendulum undergoes ______

The bob of a conical pendulum undergoes ______
by

1 Answer

Answer :

The bob of a conical pendulum undergoes ______ (A) Rectilinear motion in horizontal plane ( ... circle (D) Rectilinear motion in vertical circle
by
selected by

Related questions

What is a conical pendulum? Show that its time period is given by 2π √(l cos θ)/g, where l is the length of the string,

Description : What is a conical pendulum? Show that its time period is given by 2π √(l cos θ)/g, where l is the length of the string,

Last Answer : What is a conical pendulum? Show that its time period is given by 2π\(\sqrt{\frac{l\,cos\, ... the vertical and g is the acceleration due to gravity.

A stone whirling in a horizontal circle on the end of string depicts A. conical pendulum B. cone C. pendulum D. eclipse

Description : A stone whirling in a horizontal circle on the end of string depicts A. conical pendulum B. cone C. pendulum D. eclipse

Last Answer : conical pendulum

If air resistance is neglected, at the mid-point of its swing, the acceleration of the bob of a simple pendulum along its path is always a.Increasing b.Zero c.A cycloid d.Decreasing e.A minimum but not equal to zero

Description : If air resistance is neglected, at the mid-point of its swing, the acceleration of the bob of a simple pendulum along its path is always a.Increasing b.Zero c.A cycloid d.Decreasing e.A minimum but not equal to zero

Last Answer : d. Decreasing

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

A particle is moving in Simple Harmonic Motion in a simple pendulum with some period of oscillation. Now in order to double the period of oscillation a.The length of pendulum should be quadrupled b.The length of pendulum should be doubled c.The mass of the bob should be halved d.The length of pendulum should be reduced to one fourth e.The mass of the bob should be doubled

Description : A particle is moving in Simple Harmonic Motion in a simple pendulum with some period of oscillation. Now in order to double the period of oscillation a.The length of pendulum should be quadrupled b.The ... length of pendulum should be reduced to one fourth e.The mass of the bob should be doubled

Last Answer : a. The length of pendulum should be quadrupled

A clock with a second pendulum is gaining 5 minutes a day. To correct it a.The eccentricity of bob with pendulum should be decreased b.The length of the pendulum should be decreased c.The length of pendulum should not be changed d.The length of the pendulum should be increased e.The eccentricity of bon with pendulum should be increased

Description : A clock with a second pendulum is gaining 5 minutes a day. To correct it a.The eccentricity of bob with pendulum should be decreased b.The length of the pendulum should be decreased c.The ... .The length of the pendulum should be increased e.The eccentricity of bon with pendulum should be increased

Last Answer : d. The length of the pendulum should be increased

A bob of simple pendulum oscillating in air is made to oscillate in oil. The time period will a.Increase b.Decrease c.Not change d.Decrease but reduction depends on viscosity of oil e.None of the above

Description : A bob of simple pendulum oscillating in air is made to oscillate in oil. The time period will a.Increase b.Decrease c.Not change d.Decrease but reduction depends on viscosity of oil e.None of the above

Last Answer : a. Increase

A slow-running pendulum clock can be speeded up by? A. Reducing the weight of the bob B. Reducing the length of the rod C. Increasing the weight of the bob D. Increasing the length of the rod

Description : A slow-running pendulum clock can be speeded up by? A. Reducing the weight of the bob B. Reducing the length of the rod C. Increasing the weight of the bob D. Increasing the length of the rod

Last Answer : ANSWER: B

A slow-running pendulum clock can be speeded up by--------? A. Increasing the length of the rod B. Increasing the weight of the bob C. Reducing the length of the rod (Answer) D. Reducing the weight of the bob

Description : A slow-running pendulum clock can be speeded up by--------? A. Increasing the length of the rod B. Increasing the weight of the bob C. Reducing the length of the rod (Answer) D. Reducing the weight of the bob

Last Answer : C. Reducing the length of the rod (Answer)

What happens to the period of a pendulum if the mass of the bob is quadrupled? w) it is cut in half x) it stays the same y) it is doubled z) it is quadrupled

Description : What happens to the period of a pendulum if the mass of the bob is quadrupled? w) it is cut in half x) it stays the same y) it is doubled z) it is quadrupled

Last Answer : ANSWER: X -- IT STAYS THE SAME

For small oscillations, what happens to the period of a simple pendulum when the mass of the pendulum bob is doubled?

Description : For small oscillations, what happens to the period of a simple pendulum when the mass of the pendulum bob is doubled? 

Last Answer : ANSWER: NOTHING or PERIOD IS UNAFFECTED

The relationship between kinetic energy and the potential energy of a swinging pendulum bob is one of the following. Is it: w) kinetic energy is greater than potential energy x) kinetic energy is less than potential energy y) kinetic energy is equal to potential energy z) kinetic energy plus potential energy equals a constant

Description : The relationship between kinetic energy and the potential energy of a swinging pendulum bob is one of the following. Is it: w) kinetic energy is greater than potential energy x) kinetic ... kinetic energy is equal to potential energy z) kinetic energy plus potential energy equals a constant  

Last Answer : ANSWER: Z -- KINETIC ENERGY PLUS POTENTIAL ENERGY EQUALS A CONSTANT 

Bob Roberts of Roberts Construction is planning to buy a piece of earth-moving equipment. He would most likely base his purchase decision on ______ of the alternative machines: A)description B)sampling C)inspection D)reputation

Description : Bob Roberts of Roberts Construction is planning to buy a piece of earth-moving equipment. He would most likely base his purchase decision on ______ of the alternative machines: A)description B)sampling C)inspection D)reputation

Last Answer : C)inspection

Best way to drill a hole in a cowry and conical shell?

Description : Best way to drill a hole in a cowry and conical shell?

Last Answer : If you can’t do what you want to do with a Dremel and one of it’s many magical attachments, then I am already out of ideas. Sorry… but, have you tried using the Dremel on a very low speed? .

Coniferous trees are conical in shape. -SST 10th

Description : Coniferous trees are conical in shape. -SST 10th

Last Answer : They adopted to withstand large and heavy snowfalls and shed snow easily without bleaking limbs or some of them also have very thick bark to protect them from fire .

The slant height and base diameter of conical tomb are 25m and 14 m respectively. Find the cost of white-washing its curved surface at the rate of Rs. 210 per 100 m2 -Maths 9th

Description : The slant height and base diameter of conical tomb are 25m and 14 m respectively. Find the cost of white-washing its curved surface at the rate of Rs. 210 per 100 m2 -Maths 9th

Last Answer : Slant height of conical tomb, l = 25m Base radius, r = diameter/2 = 14/2 m = 7m CSA of conical tomb = πrl = (22/7)×7×25 = 550 CSA of conical tomb= 550m2 Cost of white-washing 550 m2 area, which is Rs (210×550)/100 = Rs. 1155 Therefore, cost will be Rs. 1155 while white-washing tomb.

What length of tarpaulin 3 m wide will be required to make conical tent of height 8 m and base radius 6m -Maths 9th

Description : What length of tarpaulin 3 m wide will be required to make conical tent of height 8 m and base radius 6m -Maths 9th

Last Answer : Solution: Height of conical tent, h = 8m Radius of base of tent, r = 6m Slant height of tent, l2 = (r2+h2) l2 = (62+82) = (36+64) = (100) or l = 10 Again, CSA of conical tent = πrl = (3.14 6 ... .2) 3] = 188.4 L-0.2 = 62.8 L = 63 Therefore, the length of the required tarpaulin sheet will be 63 m.

A conical tent is 10 m high and the radius of its base is 24 m. Find (i) slant height of the tent. -Maths 9th

Description : A conical tent is 10 m high and the radius of its base is 24 m. Find (i) slant height of the tent. -Maths 9th

Last Answer : : Ncert solutions class 9 chapter 13-5 Let ABC be a conical tent Height of conical tent, h = 10 m Radius of conical tent, r = 24m Let the slant height of the tent be l. (i) In right triangle ... (13728/7) 70 = Rs 137280 Therefore, the cost of the canvas required to make such a tent is Rs 137280.

How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Description : How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Last Answer : Given, radius (r) = 7 m and height (h) = 24m ∴ Slant height (l) = √h2 + r2 = √242 + 72 = √625 = 25 m ∴ Length of canvas required

Find the capacity in litres of a conical vessel having height 8 cm and slant height 10 cm. -Maths 9th

Description : Find the capacity in litres of a conical vessel having height 8 cm and slant height 10 cm. -Maths 9th

Last Answer : Height of conical vessel (h) = 8 cm Slant height of conical vessel (l) = 10 cm ∴ r2 + h2 = l2 r2 + 82 = 102 r2 = 100 - 64 = 36 r = 6 cm Now, volume of conical vessel = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 6 × 6 × 8 = 301.71 cm3 = 0.30171 litre

How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Description : How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Last Answer : l = √h2 + r2 = √(3.5)2 + (12)2 = √12.25 + 144 = √156.25 = 12.5 m Curved surface area = πrl = 22 / 7 × 3.5 × 12.5 = 137.5 m2 Area of cloth = 137.5 m2 Length of cloth required = C.S.A. / Width l = 137.5 / 5 = 27.5 m

How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Description : How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Last Answer : Given, radius (r) = 7 m and height (h) = 24m ∴ Slant height (l) = √h2 + r2 = √242 + 72 = √625 = 25 m ∴ Length of canvas required

Find the capacity in litres of a conical vessel having height 8 cm and slant height 10 cm. -Maths 9th

Description : Find the capacity in litres of a conical vessel having height 8 cm and slant height 10 cm. -Maths 9th

Last Answer : Height of conical vessel (h) = 8 cm Slant height of conical vessel (l) = 10 cm ∴ r2 + h2 = l2 r2 + 82 = 102 r2 = 100 - 64 = 36 r = 6 cm Now, volume of conical vessel = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 6 × 6 × 8 = 301.71 cm3 = 0.30171 litre

How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Description : How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Last Answer : l = √h2 + r2 = √(3.5)2 + (12)2 = √12.25 + 144 = √156.25 = 12.5 m Curved surface area = πrl = 22 / 7 × 3.5 × 12.5 = 137.5 m2 Area of cloth = 137.5 m2 Length of cloth required = C.S.A. / Width l = 137.5 / 5 = 27.5 m

How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Description : How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Last Answer : Slantheight5l = h2+r2 ​=(3.5)2+(12)2​ total canvas required = πrl =π×12×12.5 =471 sq m​

How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Description : How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Last Answer : Solution of this question

A conical tent is 10 m high -Maths 9th

Description : A conical tent is 10 m high -Maths 9th

Last Answer : Radius of conical tent = r = 24 m Height of conical tent = h = 10 m (i) Let l be the slant height of the cone. Then l = root under(√r2 + h2) ⇒ l = root under(√242 + 102) = root under(√576 + 100) = root ... 1 m2 canvas = ₹70 ∴ Cost of 22/7 x 24 x 26 cm2 canvas = ₹ 70 x 22/7 x 24 x 26 = ₹137280

A semicircular thin sheet of a metal of diameter 28 cm is bent and an open conical cup is made. What is the capacity of the cup ? -Maths 9th

Description : A semicircular thin sheet of a metal of diameter 28 cm is bent and an open conical cup is made. What is the capacity of the cup ? -Maths 9th

Last Answer : answer:

A child consumed an ice-cream of inverted right-circular conical shape from the top and left only 12.5% of the cone for her mother. -Maths 9th

Description : A child consumed an ice-cream of inverted right-circular conical shape from the top and left only 12.5% of the cone for her mother. -Maths 9th

Last Answer : answer:

What is a conical root? Give example. -Biology

Description : What is a conical root? Give example. -Biology

Last Answer : Conical root: this type of root tuber is conical in shape, i.e. widest at the top and tapering steadily towards the bottom: e.g. carrot. Fusiform root: this root is widest in the middle and tapers towards the top and the bottom: e.g. radish. Napiform root: the root has a top-like appearance.

The water is leaking from a conical funnel at a rate of `5cm^(3)//min`. If the redius and height of the funnel are 5cm.and 10 cm respectively, find th

Description : The water is leaking from a conical funnel at a rate of `5cm^(3)//min`. If the redius and height of the funnel are 5cm.and 10 cm respectively, find th

Last Answer : The water is leaking from a conical funnel at a rate of `5cm^(3)//min`. If the redius and height of ... of water surface from the vertex is `7.5 cm`.

Name the conical masses of medulla

Description : Name the conical masses of medulla

Last Answer : Name the conical masses of medulla

Name the conical masses of medulla

Description : Name the conical masses of medulla

Last Answer : Name the conical masses of medulla

What is a conical flask used for in science?

Description : What is a conical flask used for in science?

Last Answer : Need answer

What happens if the solution in the conical flask gets washed with distilled water during the experiment?

Description : What happens if the solution in the conical flask gets washed with distilled water during the experiment?

Last Answer : That will depend on what the solution is, as well as many otherpossible conditions what you failed to specify in yourquestion.

What is the difference between a conical burr grinder and other coffee grinders?

Description : What is the difference between a conical burr grinder and other coffee grinders?

Last Answer : The reason coffee generally tastes better when produced from conical burr grinders is due in part to the conical burr being able to grind coffee beans at much slower speeds. The theory behind this is ... results in a greater amount of heat being emitted that can comprise the perfect cup of coffee.

How much are Capresso conical burr grinders?

Description : How much are Capresso conical burr grinders?

Last Answer : On sale through Amazon.com, the Capresso conical burr grinder only costs around $85. The normal price of the grinder is $125 when it's not on sale.

Can I use a conical burr grinder to grind barley grass?

Description : Can I use a conical burr grinder to grind barley grass?

Last Answer : I don't see why not, if you mean barley grass as dry seeds. However, if you're intending to use it to grind sprouted barley grass, be aware that this is going to make an enormous mess inside the grinder, and the burrs will have to be removed and cleaned.

Where a thermal-acting breaker is required to be used in an area of unusually high, low, or constantly fluctuating temperatures, an ambient compensating element must be used. This element consists of a ______________. A. cylindrical spring on the contact arm B. conical spring on the contact arm C. second bimetal element D. second electromagnet

Description : Where a thermal-acting breaker is required to be used in an area of unusually high, low, or constantly fluctuating temperatures, an ambient compensating element must be used. This element consists of ... arm B. conical spring on the contact arm C. second bimetal element D. second electromagnet

Last Answer : Answer: C

A special horn antenna consisting of a parabolic cylinder joined to a pyramidal horn. A. Hoghorn B. Cass-horn C. Pyramidal horn D. Conical horn

Description : A special horn antenna consisting of a parabolic cylinder joined to a pyramidal horn. A. Hoghorn B. Cass-horn C. Pyramidal horn D. Conical horn

Last Answer : A. Hoghorn

Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List –I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine engines D. Ball bearing 4. Swivelling chairs A B C D A B C D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Description : Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List -I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine ... D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Last Answer : (c) 3 4 2 1

Consider the following statements (A – D) each with one or two blanks. (A) Bears go into (1) during winter to (2) cold weather. (B) A conical age pyramid with a broad base represents (3) human population. (C) A wasp pollinating a fig flower is an example of (4) . (D) An area with high levels of species richness is known as (5) .

Description : Consider the following statements (A - D) each with one or two blanks. (A) Bears go into (1) during winter to (2) cold weather. (B) A conical age pyramid with a broad base represents (3) human population. ... example of (4) . (D) An area with high levels of species richness is known as (5) .

Last Answer : (D) An area with high levels of species richness is known as (5) .

Which one of the following statements about human sperm is correct? (a) Acrosome has a conical pointed structure used for piercing and penetrating the egg, resulting in fertilisation. (b) The sperm lysins in the acrosome dissolve the egg envelope facilitating fertilisation. (c) Acrosome serves as a sensory structure leading the sperm towards the ovum. (d) Acrosome serves no particular function

Description : Which one of the following statements about human sperm is correct? (a) Acrosome has a conical pointed structure used for piercing and penetrating the egg, resulting in fertilisation. (b) The ... a sensory structure leading the sperm towards the ovum. (d) Acrosome serves no particular function

Last Answer : (b) The sperm lysins in the acrosome dissolve the egg envelope facilitating fertilisation.

The valve fitted closely in a recess against an opening in a pipe, is generally (A) Wedge shaped circular disc (B) Spherical disc (C) Parallelepiped disc (D) Conical shaped circular disc

Description : The valve fitted closely in a recess against an opening in a pipe, is generally (A) Wedge shaped circular disc (B) Spherical disc (C) Parallelepiped disc (D) Conical shaped circular disc

Last Answer : (A) Wedge shaped circular disc

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

The ratio of elongations of a conical bar due to its own weight and that of a prismatic bar of the same length, is (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Description : The ratio of elongations of a conical bar due to its own weight and that of a prismatic bar of the  same length, is  (A) 1/2  (B) 1/3  (C) 1/4  (D) 1/5

Last Answer : (B) 1/3 

Pick up the correct statement from the following: (A) The maritime structures should be designed to withstand wave motion of air (B) The wind vortex results in conical depression in the air surface (C) A tube of air rotating at hundreds of kilometres per hour forms a tornado (D) all of the above

Description : Pick up the correct statement from the following: (A) The maritime structures should be designed to withstand wave motion of air (B) The wind vortex results in conical depression in the air surface (C) A tube of air rotating at hundreds of kilometres per hour forms a tornado (D) all of the above

Last Answer : (D) all of the above

Cono weeder consist of conical rollers have on the periphery. a. Helical projection c. Interrupted projection d. None of above

Description : Cono weeder consist of conical rollers have on the periphery. a. Helical projection c. Interrupted projection d. None of above

Last Answer : Ans- b. serrated projection

Rotation of an rf-feed source to produce a conical scan pattern is identified by what term?

Description : Rotation of an rf-feed source to produce a conical scan pattern is identified by what term?

Last Answer : Nutation.

One ofthe followingis veryuseful as amultibandHFreceivingantenna.Thisisthe: a. conical horn b. folded dipole c. log periodic d. square loop

Description : One ofthe followingis veryuseful as amultibandHFreceivingantenna.Thisisthe: a. conical horn b. folded dipole c. log periodic d. square loop

Last Answer : c. log periodic