___ is a stateful communication model and server is aware of all open connection. A. Request-Response B. Publish-Subscriber C. Push-Pull D. Exclusive Pair

1 Answer

Answer :

D. Exclusive Pair 

Related questions

Description :  _____ is a bi-directional, fully duplex communication model that uses a persistent connection between client and server. A. Request-Response B. Publish-Subscriber C. Push-Pull D. Exclusive Pair

Last Answer : D. Exclusive Pair 

Description : Which is not an IoT communication model. A. Request-Response B. Publish-Subscribe C. Push-Producer D. Exclusive Pair

Last Answer : a

Description :  _____ is suitable for IOT applications to have low latency or high throughput requirements. A. REST B. Publish-Subscriber C. Push-Pull D. WebSocket

Last Answer : D. WebSocket 

Description : XMPP uses ________ architecture. A. Decentralized client-server B. Centralized client-server C. Message D. Public/subscriber

Last Answer : A. Decentralized client-server 

Description : MQTT is: a. Based on client-server architecture b. Based on publish-subscribe architecture c. Based on both of the above d. Based on none of the above

Last Answer : b. Based on publish-subscribe architecture

Description : MQTT is: A. Based on client-server architecture B. Based on publish-subscribe architecture C. Based on both of the above D. Based on none of the above

Last Answer : B. Based on publish-subscribe architecture 

Description : LR-WPANs standards from basis of specifications for high level communication protocol such as ___. A. Zigbee B. Allsean C. Tyrell D. Microsoft's Azure

Last Answer : A. Zigbee 

Description :  ___ is an open source electronic platform based on easy to used hardware and software. A. Arduino B. Uno C. Raspberry Pi D. Node

Last Answer : A. Arduino 

Description : ___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Last Answer : B. Temperature Sensor 

Description : DC motors converts electrical into ___ energy. A. Mechanical B. Wind C. Electric D. None

Last Answer : A. Mechanical  

Description : The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : A. Application layer 

Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : C. Network layer 

Description : Processors used in many microcontroller products need to be______ A. high power B. low power C. low interrupt response D. low code density

Last Answer : B. low power 

Description : 802.3 is the standard for 10BASE5 Ethernet that uses ___________ cable as shared medium. A. Twisted pair cable B. Coaxial cable C. Fiber optic cable D. None of the above 

Last Answer : B. Coaxial cable 

Description : How power supply is done to RPi? A. USB connection B. Internal battery C. Charger D. Adapter

Last Answer : A. USB connection 

Description : Security based connection is provided by which layer? A. Application layer B. Transport layer C. Session layer D. Network layer

Last Answer : D. Network layer 

Description : Services provided by application layer? A. Web chat B. Error control C. Connection services D. Congestion control

Last Answer : A. Web chat 

Description : ______________ is useful for time-sensitive application that have very small data units to exchange and do not want the overhead of connection setup. A. TCP B. UDP C. Transport layer D. None of the above.

Last Answer : B. UDP 

Description : ____________ refers to establish a proper connection between all the things of IOT. A. Connectivity B. Analyzing C. Sensing D. Active Engagement

Last Answer : A. Connectivity 

Description : ____ is a data-centric middleware standard for device-to-device and machine-to-machine communication. A. Data Distribution Serviced (DDS) B. Advance Message Queuing Protocol (AMQP) C. Extensible Messaging and Presence Protocol (XMPP) D. Message Queue Telemetry Transport (MQTT)

Last Answer : A. Data Distribution Serviced (DDS) 

Description : .______ is a collection of WLAN communication standards. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Last Answer : B. IEEE 802.11 

Description : ______ consists of communication protocols for electronic devices, typically a mobile device and a standard device. A. RFID B. MQTT C. NFC D. None of above

Last Answer : C. NFC 

Description : _____ devices may support a number of interoperable communication protocols and communicate with other device and also with infrastructure. A. Artificial Intelligence B. Machine Learning C. Internet of Things D. None of above

Last Answer : C. Internet of Things 

Description : Which of the following is an example for wireless communication interface? A. RS-232C B. Wi-Fi C. Bluetooth D. EEE1394 E. Both (B) and (C)

Last Answer : E. Both (B) and (C) 

Description : A digital multi meter is an example of an embedded system for A. Data communication B. Monitoring C. Control D. All of these E. None of these

Last Answer : B. Monitoring 

Description : Which of the following is (are) example(s) of embedded system for data communication? USB Mass Storage device A. Network router B. Digital camera C. Music player D. All of these E. None of these

Last Answer : B. Digital camera 

Description : Which of the following is an (are) an intended purpose(s) of embedded systems? A. Data collection B. Data processing C. Data communication D. All of these E. None of these

Last Answer : D. All of these 

Description : Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport

Last Answer : a. Session

Description : _________ is the most refined and restrictive service model. A. IaaS B. CaaS C. PaaS D. All of the mentioned

Last Answer : C. PaaS 

Description :  _________ is a cloud computing service model in which hardware is virtualized in the cloud. A. IaaS B. CaaS C. PaaS D. None of the mentioned

Last Answer : A. IaaS 

Description : What gives a persons exclusive right to publish and sell literaryMusicor artistic work?

Last Answer : Need answer

Description : A client-server system uses a satellite network, with the satellite at a height of 40,000 kms. What is the best-case delay in response to a request? (Note that the speed of light in air is 3,00,000 km/second). (A) 133.33 m sec (B) 266.67 m sec (C) 400.00 m sec (D) 533.33 m sec

Last Answer : (D) 533.33 m sec Explanation: The request has to go up and down, and the response has to go up and down. The total path length traversed is thus 160.000 km. The speed of light in air and vacuum is 300,000 km/sec, so the propagation delay alone is 160,000/300,000 sec or about 533 msec. 

Description : The client code recognizes the SSL request and establishes a connection through TCP port ____ to the SSL code on the server A. 1023 B. 402 C. 443 D. 8080

Last Answer : C. 443

Description : While initiating SSL session, the client code recognizes the SSL request and establishes a connection through TCP Part.................to the SSL code on the server. A) 420 B) 1032 C) 443 D) 322

Last Answer : C) 443

Description : While initiating SSL session, the client code recognizes the SSL request and establishes a connection through TCP Part …………….. to the SSL code on the server. A) 420 B) 1032 C) 443 D) 322

Last Answer : C) 443

Description : Call request signal is: (A) Seize signal (B) Idle state signal (C) Line identification signal (D) Called subscriber alert signal

Last Answer : (A) Seize signal

Description : XMPP uses ________ architecture. A. Decentralized client-server B. Centralized client-server C. Message D. Public/subscriber

Last Answer : A. Decentralized client-server

Description : The local loop has _______ cablethat connects the subscriber telephonetothe nearest end office. A) twisted-pair B) coaxial C) fiber-optic D) none of the above

Last Answer : twisted-pair

Description : Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these

Last Answer : c. Both a and b

Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Last Answer : c. IEEE 802.3

Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned

Last Answer : b. CSMA/CA

Description : HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier

Last Answer : d. uniform resource identifier

Description : .Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz

Last Answer : c. Sub 1 GHz

Description : Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP

Last Answer : d. UDP

Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP

Last Answer : d. HTTP

Description : ____ sensor measure heat emitted by objects. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Last Answer : C. IR Sensor 

Description : ____ sensor is used for automatic door controls, automatic parking system, automated sinks, automated toilet flushers, hand dryers. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Motion Sensor

Last Answer : D. Motion Sensor 

Description : The measurement of humidity is A. RH B. PH C. IC D. None of aboved

Last Answer : A. RH 

Description : ____detect the presence or absence of nearby object without any physical contact. A. Smoke Sensor B. Pressure Sensor C. IR Sensor D. Proximity Sensor

Last Answer : D. Proximity Sensor 

Description : ____ is used latching, locking, triggering. A. Solenoid B. Relay C. Linear Actuator D. Servo motors

Last Answer : A. Solenoid