Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP
Last Answer : d. HTTP
Description : Which one out of these is not a data link layer technology? A. Bluetooth B. UART C. Wi-Fi D. HTTP
Last Answer : D. HTTP
Description : The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : A. Application layer
Description : _____________ layer protocols determine how the data is physically sent over the network’s physical layer or medium. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : D. Link layer
Description : The two sublayers of a Data Link layer are a. LLC Logical Link Control Layer b. MAC Medium Access Control Layer c. Both A and B d. Data Layer
Last Answer : c. Both A and B
Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above
Last Answer : data link
Description : ____________ protocols provide end to end message transfer capability independent of the underlying network. A. Network layer B. Transport layer C. Application layer D. Link layer
Last Answer : B. Transport layer
Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : C. Network layer
Description : ______ layer is responsible for sending of IP datagrams from the source network to the destination network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : The correct answer is: C. Network layer The network layer is responsible for routing and forwarding IP datagrams from the source network to the destination network. It provides logical addressing ... at the network layer include IP (Internet Protocol) and ICMP (Internet Control Message Protocol).
Description : _____________ is a collection of wired Ethernet standard for the link layer. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4
Last Answer : A. IEEE 802.3
Description : Transport layer receives data in the form of? A. Packets B. Byte streams C. Bits stream D. both packet and Byte stream
Last Answer : B. Byte streams
Description : The types of data services offered by an LLC (Logical Link Control) layer are a. Connectionless which is fast and unreliable b. Connection Oriented which is slow and reliable c. Both A and B d. None
Description : Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes
Last Answer : A. Checksum
Description : Data in network layer is transferred in the form of ____________ A. Layers B. Packets C. Bytes D. Bits
Last Answer : B. Packets
Description : ______________ is useful for time-sensitive application that have very small data units to exchange and do not want the overhead of connection setup. A. TCP B. UDP C. Transport layer D. None of the above.
Last Answer : B. UDP
Description : Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP
Last Answer : A. TCP/IP
Description : Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport
Last Answer : a. Session
Description : Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP
Last Answer : d. UDP
Description : Network layer protocol exits in_____? A. Host B. Switches C. Packets D. Bridges
Last Answer : A. Host
Description : The network layer consists of which hardware devices? A. Router B. Bridges C. Switches D. All of the above
Last Answer : D. All of the above
Description : The network layer is considered as the _______? A. Backbone B. packets C. Bytes D. bits
Last Answer : A. Backbone
Description : Security based connection is provided by which layer? A. Application layer B. Transport layer C. Session layer D. Network layer
Last Answer : D. Network layer
Description : Services provided by application layer? A. Web chat B. Error control C. Connection services D. Congestion control
Last Answer : A. Web chat
Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above
Last Answer : d. All the above
Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above
Last Answer : D. All the above
Description : Properties of IoT devices. A. Sense B. Send and receive data C. Both A and B D. None of above
Last Answer : C. Both A and B
Description : The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above
Last Answer : LLC
Description : The collection of data is achieved with ________ changes. A. Intelligence B. Connectivity C. Dynamic Nature D. Enormous Scale
Last Answer : C. Dynamic Nature
Description : The process of collecting, organizing and collecting large sets of data called as A. WSN B. Cloud Computing C. Big Data D. None of above
Last Answer : C. Big Data
Description : ____ is a transformative computing paradigm that involves delivering applications and services over the internet. A. WSN B. Cloud Computing C. Big Data D. None of above
Last Answer : B. Cloud Computing
Description : ____ is a data-centric middleware standard for device-to-device and machine-to-machine communication. A. Data Distribution Serviced (DDS) B. Advance Message Queuing Protocol (AMQP) C. Extensible Messaging and Presence Protocol (XMPP) D. Message Queue Telemetry Transport (MQTT)
Last Answer : A. Data Distribution Serviced (DDS)
Description : XMPP creates _________ identity. A. Device B. Email C. Message D. Data
Last Answer : A. Device
Description : MQTT is better than HTTP for sending and receiving data. A. True B. False
Last Answer : A. True
Description : IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s
Last Answer : C. 1 Mb/s to up to 6.75 Gb/s
Description : The sensed data communicated ___________________. A. Cloud-based servers/storage. B. I/O interfaces. C. Internet connectivity. D. None of the above
Last Answer : A. Cloud-based servers/storage.
Description : Interconnection of Internet and computing devices embedded in everyday objects, enabling them to send and receive data is called_____________ A. Internet of Things B. Network Interconnection C. Object Determination D. None of these
Last Answer : A. Internet of Things
Description : Harvard architecture allows: A. Separate program and data memory B. Pipe-ling C. Complex architecture D. All of the mentioned
Last Answer : D. All of the mentioned
Description : Which architecture provides separate buses for program and data memory? A. Harvard architecture B. Von Neumann architecture C. None of the mentioned D. All of the mentioned
Last Answer : A. Harvard architecture
Description : A digital multi meter is an example of an embedded system for A. Data communication B. Monitoring C. Control D. All of these E. None of these
Last Answer : B. Monitoring
Description : What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above
Last Answer : D .All of the above
Description : Which of the following is (are) example(s) of embedded system for data communication? USB Mass Storage device A. Network router B. Digital camera C. Music player D. All of these E. None of these
Last Answer : B. Digital camera
Description : Which of the following is an (are) an intended purpose(s) of embedded systems? A. Data collection B. Data processing C. Data communication D. All of these E. None of these
Last Answer : D. All of these
Description : MQTT is: a. Based on client-server architecture b. Based on publish-subscribe architecture c. Based on both of the above d. Based on none of the above
Last Answer : b. Based on publish-subscribe architecture
Description : IoT devices are ____ A. Standard B. Non-standard C. Both D. None
Last Answer : B. Non-standard
Description : Properties of Arduino are: A. Inexpensive B. Independent C. Simple D. both A and C
Last Answer : D. both A and C
Description : Accelerometer sensors are used in______ A. Smartphones B. Aircrafts C. Both D. None of above
Last Answer : C. Both
Description : Linear actuators are used in________ A. Machine tools B. Industrial machinery C.both A and B D.None
Last Answer : A. Machine tools
Description : MQTT is: A. Based on client-server architecture B. Based on publish-subscribe architecture C. Based on both of the above D. Based on none of the above
Last Answer : B. Based on publish-subscribe architecture
Description : AVR microcontroller executes most of the instruction in _________________. A. Single execution cycle. B. Double execution cycle. C. Both A& B D. None of the above.
Last Answer : architecture of embedded system consists of
Description : AVR stands for_____________________. A. Advanced Virtual RISC. B. Alf-Egil Bogen and Vegard Wollan RISC C. Both A & B D. None of the above
Last Answer : C. Both A & B