Description : LR-WPANs standards from basis of specifications for high level communication protocol such as ___. A. Zigbee B. Allsean C. Tyrell D. Microsoft's Azure
Last Answer : A. Zigbee
Description : Zigbee specification are based on ______. A. 802.3 B. 802.11 C. 802.16 D. 802.15.4
Last Answer : D. 802.15.4
Description : ________ of the following is a protocol related to IOT A. Zigbee B. 6LoWPAN C. CoAP D. All of the above
Last Answer : C. CoAP
Description : ____ is a collection of wireless broadband standards (WiMax). A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4
Last Answer : C. IEEE 802.16
Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned
Last Answer : b. CSMA/CA
Description : WSN stands for A. Wide Sensor Network B. Wireless Sensor Network C. Wired Sensor Network D. None of these
Last Answer : B. Wireless Sensor Network
Description : CoAP is specialized in ___________ A. Internet applications B. Device applications C. Wireless applications D. Wired applications
Last Answer : A. Internet applications
Description : 6LOWPAN stands for A. 6 LOW Personal Area Network B. IPv6 LOW Personal Area Network C. IPv6 over Low power wireless personal area network D. None of above
Last Answer : C. IPv6 over Low power wireless personal area network
Description : Which of the following is an example for wireless communication interface? A. RS-232C B. Wi-Fi C. Bluetooth D. EEE1394 E. Both (B) and (C)
Last Answer : E. Both (B) and (C)
Description : ____ sensor measure heat emitted by objects. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor
Last Answer : C. IR Sensor
Description : ____ sensor is used for automatic door controls, automatic parking system, automated sinks, automated toilet flushers, hand dryers. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Motion Sensor
Last Answer : D. Motion Sensor
Description : ____ is used latching, locking, triggering. A. Solenoid B. Relay C. Linear Actuator D. Servo motors
Last Answer : A. Solenoid
Description : IoT devices are ____ A. Standard B. Non-standard C. Both D. None
Last Answer : B. Non-standard
Description : ____ is a transformative computing paradigm that involves delivering applications and services over the internet. A. WSN B. Cloud Computing C. Big Data D. None of above
Last Answer : B. Cloud Computing
Description : ____ is a data-centric middleware standard for device-to-device and machine-to-machine communication. A. Data Distribution Serviced (DDS) B. Advance Message Queuing Protocol (AMQP) C. Extensible Messaging and Presence Protocol (XMPP) D. Message Queue Telemetry Transport (MQTT)
Last Answer : A. Data Distribution Serviced (DDS)
Description : Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these
Last Answer : c. Both a and b
Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4
Last Answer : c. IEEE 802.3
Description : MQTT is: a. Based on client-server architecture b. Based on publish-subscribe architecture c. Based on both of the above d. Based on none of the above
Last Answer : b. Based on publish-subscribe architecture
Description : HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier
Last Answer : d. uniform resource identifier
Description : .Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz
Last Answer : c. Sub 1 GHz
Description : Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport
Last Answer : a. Session
Description : Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP
Last Answer : d. UDP
Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP
Last Answer : d. HTTP
Description : The measurement of humidity is A. RH B. PH C. IC D. None of aboved
Last Answer : A. RH
Description : ___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor
Last Answer : B. Temperature Sensor
Description : ____detect the presence or absence of nearby object without any physical contact. A. Smoke Sensor B. Pressure Sensor C. IR Sensor D. Proximity Sensor
Last Answer : D. Proximity Sensor
Description : ___ is an open source electronic platform based on easy to used hardware and software. A. Arduino B. Uno C. Raspberry Pi D. Node
Last Answer : A. Arduino
Description : What is the microcontroller used in Arduino UNO? A. ATmega328p B. ATmega2560 C. ATmega32114 D. AT91SAM3x8E
Last Answer : A. ATmega328p
Description : Properties of IoT devices. A. Sense B. Send and receive data C. Both A and B D. None of above
Last Answer : C. Both A and B
Description : Properties of Arduino are: A. Inexpensive B. Independent C. Simple D. both A and C
Last Answer : D. both A and C
Description : Gas sensors are used to detect _____gases. A. Toxic B. Natural C. Oxygen D. Hydrogen
Last Answer : A. Toxic
Description : Image sensors are found in_______ A. Cameras B. Night-vision equipment C. Sonars D. All of above
Last Answer : D. All of above
Description : Accelerometer sensors are used in______ A. Smartphones B. Aircrafts C. Both D. None of above
Last Answer : C. Both
Description : Solenoid is a specially designed ________ A. Actuator B. Machine C. Electromagnet D. none of above
Last Answer : C. Electromagnet
Description : Linear actuators are used in________ A. Machine tools B. Industrial machinery C.both A and B D.None
Last Answer : A. Machine tools
Description : DC motors converts electrical into ___ energy. A. Mechanical B. Wind C. Electric D. None
Last Answer : A. Mechanical
Description : Stepper motors are_____ A. AC motors B. DC motors C. Electromagnets D. None of above
Last Answer : B. DC motors
Description : Devices that transforms electrical signals into physical movements A. Sensors B. Actuators C. Switches D. Display
Last Answer : B. Actuators
Description : ________ in IoT as one of the key characteristics, devices have different hardware platforms and networks. A. Sensors B. Heterogeneity C. Security D. Connectivity
Last Answer : B. Heterogeneity
Description : The number of devices that need to be managed and that communicate with each other will be much larger. A. Intelligence B. Connectivity C. Dynamic Nature D. Enormous Scale
Last Answer : D. Enormous Scale
Description : The collection of data is achieved with ________ changes. A. Intelligence B. Connectivity C. Dynamic Nature D. Enormous Scale
Last Answer : C. Dynamic Nature
Description : ________ empowers IoT by bringing together everyday objects. A. Intelligence B. Connectivity C. Dynamic Nature D. Enormous Scale
Last Answer : B. Connectivity
Description : Which characteristics involve the facility the thing to respond in an intelligent way to a particular situation? A. Intelligence B. Connectivity C. Dynamic Nature D. Enormous Scale
Last Answer : A. Intelligence
Description : Does micro SD card present in all modules? A. True B. False
Last Answer : A. True
Description : Which instruction set architecture is used in Raspberry Pi? A. X86 B. MSP C. AVR D. ARM
Last Answer : D. ARM
Description : What is the Ethernet/LAN cable used in RPi? A.Cat5 B.at5e C. cat6 D . RJ45
Last Answer : D . RJ45
Description : How power supply is done to RPi? A. USB connection B. Internal battery C. Charger D. Adapter
Last Answer : A. USB connection
Description : What do we use to connect TV to RPi? A. Male HDMI B. Female HDMI C. Male HDMI and Adapter D. Female HDMI and Adapter
Last Answer : C. Male HDMI and Adapter
Description : Does RPi have an internal memory? A. True B. False
Description : Does Raspberry Pi need external hardware? A. True B. False
Last Answer : B. False