6LOWPAN stands for A. 6 LOW Personal Area Network B. IPv6 LOW Personal Area Network C. IPv6 over Low power wireless personal area network D. None of above

6LOWPAN stands for A. 6 LOW Personal Area Network B. IPv6 LOW Personal Area Network C. IPv6 over Low power wireless personal area network D. None of above
by

1 Answer

Answer :

C. IPv6 over Low power wireless personal area network 
by

Related questions

________ of the following is a protocol related to IOT A. Zigbee B. 6LoWPAN C. CoAP D. All of the above

Description :  ________ of the following is a protocol related to IOT A. Zigbee B. 6LoWPAN C. CoAP D. All of the above

Last Answer : C. CoAP 

WSN stands for A. Wide Sensor Network B. Wireless Sensor Network C. Wired Sensor Network D. None of these

Description : WSN stands for A. Wide Sensor Network B. Wireless Sensor Network C. Wired Sensor Network D. None of these

Last Answer : B. Wireless Sensor Network 

What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Description : What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Last Answer : C. 128 bits 

Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned

Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned

Last Answer : b. CSMA/CA

____ is a one of the most popular wireless technologies used by WSNs. A. Zigbee B. AllSean C. Tyrell D. Z-Wave

Description : ____ is a one of the most popular wireless technologies used by WSNs. A. Zigbee B. AllSean C. Tyrell D. Z-Wave

Last Answer : A. Zigbee 

CoAP is specialized in ___________ A. Internet applications B. Device applications C. Wireless applications D. Wired applications

Description : CoAP is specialized in ___________ A. Internet applications B. Device applications C. Wireless applications D. Wired applications

Last Answer : A. Internet applications 

____ is a collection of wireless broadband standards (WiMax). A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Description : ____ is a collection of wireless broadband standards (WiMax). A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Last Answer : C. IEEE 802.16 

Which of the following is an example for wireless communication interface? A. RS-232C B. Wi-Fi C. Bluetooth D. EEE1394 E. Both (B) and (C)

Description : Which of the following is an example for wireless communication interface? A. RS-232C B. Wi-Fi C. Bluetooth D. EEE1394 E. Both (B) and (C)

Last Answer : E. Both (B) and (C) 

PaaS stands for_____ A. Platform as a Service B. Platform as a Survey C. People as a Service D. Platform as a Survey

Description : PaaS stands for_____ A. Platform as a Service B. Platform as a Survey C. People as a Service D. Platform as a Survey

Last Answer : A. Platform as a Service 

In Node MCU, MCU stands for_____. A. Micro Control Unit B. Micro Controller Unit C. Macro Control Unit D. Macro Controller Unit

Description : In Node MCU, MCU stands for_____. A. Micro Control Unit B. Micro Controller Unit C. Macro Control Unit D. Macro Controller Unit

Last Answer : B. Micro Controller Unit 

MQTT stands for _____________ A. MQ Telemetry Things B. MQ Transport Telemetry C. MQ Transport Things D. MQ Telemetry Transport

Description : MQTT stands for _____________ A. MQ Telemetry Things B. MQ Transport Telemetry C. MQ Transport Things D. MQ Telemetry Transport

Last Answer : D. MQ Telemetry Transport 

IIOT stands for A. Information Internet of Things B. Industrial Internet of Things C. Inovative Internet of Things D. None of above

Description : IIOT stands for A. Information Internet of Things B. Industrial Internet of Things C. Inovative Internet of Things D. None of above

Last Answer : B. Industrial Internet of Things 

AVR stands for_____________________. A. Advanced Virtual RISC. B. Alf-Egil Bogen and Vegard Wollan RISC C. Both A & B D. None of the above

Description : AVR stands for_____________________. A. Advanced Virtual RISC. B. Alf-Egil Bogen and Vegard Wollan RISC C. Both A & B D. None of the above

Last Answer : C. Both A & B 

In microcontrollers, I2C stands for A. Inter-Integrated Clock B. Initial-Integrated Clock C. Intel-Integrated Circuit D. Inter-Integrated Circuit

Description : In microcontrollers, I2C stands for A. Inter-Integrated Clock B. Initial-Integrated Clock C. Intel-Integrated Circuit D. Inter-Integrated Circuit

Last Answer : D. Inter-Integrated Circuit 

ASIC stands for A. Application-System Integrated Circuits B. Application-Specific Integrated Circuits C. Application-System Internal Circuits D. Application-Specific Internal Circuits

Description : ASIC stands for A. Application-System Integrated Circuits B. Application-Specific Integrated Circuits C. Application-System Internal Circuits D. Application-Specific Internal Circuits

Last Answer : B. Application-Specific Integrated Circuits 

ARM stands for _________ A. Advanced RISC Machine B. Advanced RISC Methodology C. Advanced Reduced Machine D. Advanced Reduced Methodology

Description : ARM stands for _________ A. Advanced RISC Machine B. Advanced RISC Methodology C. Advanced Reduced Machine D. Advanced Reduced Methodology

Last Answer : A. Advanced RISC Machine 

The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer

Description : The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : A. Application layer 

_____________ layer protocols determine how the data is physically sent over the network’s physical layer or medium. A. Application layer B. Transport layer C. Network layer D. Link layer

Description : _____________ layer protocols determine how the data is physically sent over the network’s physical layer or medium. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : D. Link layer 

The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Description : The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Last Answer : A. Low cost and low power consumption 

Processors used in many microcontroller products need to be______ A. high power B. low power C. low interrupt response D. low code density

Description : Processors used in many microcontroller products need to be______ A. high power B. low power C. low interrupt response D. low code density

Last Answer : B. low power 

What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above

Description : What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above

Last Answer : D .All of the above 

Network layer protocol exits in_____? A. Host B. Switches C. Packets D. Bridges

Description : Network layer protocol exits in_____? A. Host B. Switches C. Packets D. Bridges

Last Answer : A. Host  

The network layer consists of which hardware devices? A. Router B. Bridges C. Switches D. All of the above

Description : The network layer consists of which hardware devices? A. Router B. Bridges C. Switches D. All of the above 

Last Answer : D. All of the above  

The network layer is considered as the _______? A. Backbone B. packets C. Bytes D. bits

Description : The network layer is considered as the _______? A. Backbone B. packets C. Bytes D. bits 

Last Answer : A. Backbone  

Security based connection is provided by which layer? A. Application layer B. Transport layer C. Session layer D. Network layer

Description : Security based connection is provided by which layer? A. Application layer B. Transport layer C. Session layer D. Network layer

Last Answer : D. Network layer 

TCP and UDP are called? A. Application protocols B. Session protocols C. Transport protocols D. Network protocols

Description :  TCP and UDP are called? A. Application protocols B. Session protocols C. Transport protocols D. Network protocols

Last Answer : C. Transport protocols  

Data in network layer is transferred in the form of ____________ A. Layers B. Packets C. Bytes D. Bits

Description : Data in network layer is transferred in the form of ____________ A. Layers B. Packets C. Bytes D. Bits

Last Answer : B. Packets 

Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Description : Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Last Answer : A. TCP/IP 

What does HTTP do? A. Enables network resources and reduces perception of latency B. Reduces perception of latency and allows multiple concurrency exchange C. Allows multiple concurrent exchange and enables network resources D. Enables network resources and reduces perception of latency and Allows multiple concurrent exchange.

Description :  What does HTTP do? A. Enables network resources and reduces perception of latency B. Reduces perception of latency and allows multiple concurrency exchange C. Allows multiple concurrent ... D. Enables network resources and reduces perception of latency and Allows multiple concurrent exchange.

Last Answer : D. Enables network resources and reduces perception of latency and Allows multiple concurrent exchange.

____________ protocols provide end to end message transfer capability independent of the underlying network. A. Network layer B. Transport layer C. Application layer D. Link layer

Description : ____________ protocols provide end to end message transfer capability independent of the underlying network. A. Network layer B. Transport layer C. Application layer D. Link layer 

Last Answer : B. Transport layer 

___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer

Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : C. Network layer 

______ layer is responsible for sending of IP datagrams from the source network to the destination network. A. Application layer B. Transport layer C. Network layer D. Link layer

Description : ______ layer is responsible for sending of IP datagrams from the source network to the destination network. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : The correct answer is: C. Network layer The network layer is responsible for routing and forwarding IP datagrams from the source network to the destination network. It provides logical addressing ... at the network layer include IP (Internet Protocol) and ICMP (Internet Control Message Protocol).

Interconnection of Internet and computing devices embedded in everyday objects, enabling them to send and receive data is called_____________ A. Internet of Things B. Network Interconnection C. Object Determination D. None of these

Description : Interconnection of Internet and computing devices embedded in everyday objects, enabling them to send and receive data is called_____________ A. Internet of Things B. Network Interconnection C. Object Determination D. None of these 

Last Answer : A. Internet of Things 

Which of the following is (are) example(s) of embedded system for data communication? USB Mass Storage device A. Network router B. Digital camera C. Music player D. All of these E. None of these

Description : Which of the following is (are) example(s) of embedded system for data communication? USB Mass Storage device A. Network router B. Digital camera C. Music player D. All of these E. None of these

Last Answer : B. Digital camera 

_____ is suitable for IOT applications to have low latency or high throughput requirements. A. REST B. Publish-Subscriber C. Push-Pull D. WebSocket

Description :  _____ is suitable for IOT applications to have low latency or high throughput requirements. A. REST B. Publish-Subscriber C. Push-Pull D. WebSocket

Last Answer : D. WebSocket 

How power supply is done to RPi? A. USB connection B. Internal battery C. Charger D. Adapter

Description : How power supply is done to RPi? A. USB connection B. Internal battery C. Charger D. Adapter

Last Answer : A. USB connection 

IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s

Description : IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s

Last Answer : C. 1 Mb/s to up to 6.75 Gb/s 

____ is a transformative computing paradigm that involves delivering applications and services over the internet. A. WSN B. Cloud Computing C. Big Data D. None of above

Description : ____ is a transformative computing paradigm that involves delivering applications and services over the internet. A. WSN B. Cloud Computing C. Big Data D. None of above

Last Answer : B. Cloud Computing 

Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these

Description : Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these

Last Answer : c. Both a and b

Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Last Answer : c. IEEE 802.3

MQTT is: a. Based on client-server architecture b. Based on publish-subscribe architecture c. Based on both of the above d. Based on none of the above

Description : MQTT is: a. Based on client-server architecture b. Based on publish-subscribe architecture c. Based on both of the above d. Based on none of the above

Last Answer : b. Based on publish-subscribe architecture

HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier

Description : HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier

Last Answer : d. uniform resource identifier

.Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz

Description : .Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz

Last Answer : c. Sub 1 GHz

Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport

Description : Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport

Last Answer : a. Session

Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP

Description : Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP

Last Answer : d. UDP

Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP

Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP

Last Answer : d. HTTP

____ sensor measure heat emitted by objects. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Description : ____ sensor measure heat emitted by objects. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Last Answer : C. IR Sensor 

____ sensor is used for automatic door controls, automatic parking system, automated sinks, automated toilet flushers, hand dryers. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Motion Sensor

Description : ____ sensor is used for automatic door controls, automatic parking system, automated sinks, automated toilet flushers, hand dryers. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Motion Sensor

Last Answer : D. Motion Sensor 

The measurement of humidity is A. RH B. PH C. IC D. None of aboved

Description : The measurement of humidity is A. RH B. PH C. IC D. None of aboved

Last Answer : A. RH 

___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Description : ___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Last Answer : B. Temperature Sensor