is there a way to incres the energy my brain runs on

is there a way to incres the energy my brain runs on
by

1 Answer

Answer :

Eat brain food.  Here is a list of 50 foods to eat http://4mind4life.com/blog/2008/07/18/brain-foods-list-of-50-good-brain-foods/  Do brain excersices > http://www.brainmetrix.com/   
by

Related questions

The energy-saving light bulb runs for a few seconds.

Description : I have an energy-saving light bulb and every time I turn it on, it lasts for about 4 seconds. It is normal? Or is it damaged?

Last Answer : 4 s to full power? It's not long. To save money, of course (some start up to 15-20 s). ;-) Anyway - if it starts up, it's not damaged. If you need a faster reaction, "go back" to ... one somewhere where there is no need for a fast start-up and where it lights up longer ("flashing" does not help).

What form of energy runs a refrigerator?

Description : What form of energy runs a refrigerator?

Last Answer : Most types of energy work in principle, but usuallyrefrigerators are designed to work on electrical energy; some(designed to not rely on the electrical network) might also have anengine that runs on gasoline or some similar fuel.

A 60 watt light bulb runs for 5 seconds how much energy does it use?

Description : A 60 watt light bulb runs for 5 seconds how much energy does it use?

Last Answer : 300 j of energy

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Description : Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Last Answer : Following are the suggestion the energy conservation techniques in following cases :  (i) Motor is running with 70% loaded condition: Use APFC or IPFC for better power factor improvement. Use ... If possible use low capacity motor for above condition. If possible switch off the motor.