A 60 watt light bulb runs for 5 seconds how much energy does it use?

A 60 watt light bulb runs for 5 seconds how much energy does it use?
by

1 Answer

Answer :

300 j of energy
by
selected by

Related questions

The energy-saving light bulb runs for a few seconds.

Description : I have an energy-saving light bulb and every time I turn it on, it lasts for about 4 seconds. It is normal? Or is it damaged?

Last Answer : 4 s to full power? It's not long. To save money, of course (some start up to 15-20 s). ;-) Anyway - if it starts up, it's not damaged. If you need a faster reaction, "go back" to ... one somewhere where there is no need for a fast start-up and where it lights up longer ("flashing" does not help).

Can I replace a 60 watt incandescent light bulb with a fluorescent or LED bulb that puts out more light than the incandescent?

Description : Can I replace a 60 watt incandescent light bulb with a fluorescent or LED bulb that puts out more light than the incandescent?

Last Answer : Light output is measured in lumens, and yes, you can find a fluorescent bulb in lumen output equal to or greater than an incandescent 75 or 100 watt bulb.And it won’t be anywhere near 60 watts, so you are safe.

How much energy does it take to run a 100 watt light bulb for 24 hours?

Description : How much energy does it take to run a 100 watt light bulb for 24 hours?

Last Answer : It is usually measured in kilowatt hours. 100 watt bulb X 24 hours= 2400 watts or 2.4 kilowatt hours.

How much energy in consumed if a 100 watt light bulb is operated for 10 MINUTES?

Description : How much energy in consumed if a 100 watt light bulb is operated for 10 MINUTES?

Last Answer : ANSWER: 60,000 JOULES or 60kJ or 6X104J

I have a 60 watt/120v clip-on lamp. What is the highest wattage of compact fluorescent bulb can I safely use in this lamp?

Description : I have a 60 watt/120v clip-on lamp. What is the highest wattage of compact fluorescent bulb can I safely use in this lamp?

Last Answer : By the way, I mean actual watts on the fluorescent bulb, not replacement-watts. :)

If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Description : If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Last Answer : Answer: B

A 100-watt light bulb is left on for 10 hours. Electricity is 10 cents per kilowatt-hour. How much did it cost to operate the light bulb?

Description : A 100-watt light bulb is left on for 10 hours. Electricity is 10 cents per kilowatt-hour. How much did it cost to operate the light bulb?

Last Answer : ANSWER: 10 CENTS

A homeowner replaces a 65 watt incandescent bulb with a 15 watt compact fluorescent lamp. The light is on 2000 hours a year. If electricity cost 10 cents a kilowatt-hour, how much money is saved on the electric bill in one year? w) $50.00 x) $10.00 y) $5.00 z) $1.00

Description : A homeowner replaces a 65 watt incandescent bulb with a 15 watt compact fluorescent lamp. The light is on 2000 hours a year. If electricity cost 10 cents a kilowatt-hour, how much money is saved on the electric bill in one year? w) $50.00 x) $10.00 y) $5.00 z) $1.00 

Last Answer : ANSWER: X -- $10.00 

Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts.

Description : Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts. 

Last Answer : ANSWER: LOWER

Used normally, a 150-watt, 120 volt light bulb requires how many amps of current?

Description : Used normally, a 150-watt, 120 volt light bulb requires how many amps of current?

Last Answer : ANSWER: 1.25 AMPS 

About how many times longer would a 10 watt light bulb be able to burn compared to a 100 watt bulb with

Description : About how many times longer would a 10 watt light bulb be able to burn compared to a 100 watt bulb with the same energy?  (A) 10 times longer (B) 100 times longer (C) Same time (D) None of the above

Last Answer : About how many times longer would a 10 watt light bulb be able to burn compared to a 100 watt bulb with the same energy?  (A) 10 times longer (B) 100 times longer (C) Same time (D) None of the above

A 100-watt light bulb turned on for 8 hours uses :

Description : A 100-watt light bulb turned on for 8 hours uses :  (A) 800 Wh (B) 0.8 kWh (C) 8 kWh (D) None of the above

Last Answer : A 100-watt light bulb turned on for 8 hours uses :  (A) 800 Wh (B) 0.8 kWh (C) 8 kWh (D) None of the above

How much money do you save by using a 20 Watt Compact Fluorescent over an incandescent bulb?

Description : How much money do you save by using a 20 Watt Compact Fluorescent over an incandescent bulb?

Last Answer : An Energy Star qualified compact fluorescent light bulb can save you around $30 over it's lifetime, paying for its self in about 6 months.

If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Description : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Last Answer : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value ... 20%` B. `2.5%` C. `5%` D. `10%`

What is the Cost to run a 5 watt led bulb for a year?

Description : What is the Cost to run a 5 watt led bulb for a year?

Last Answer : Need answer

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Last Answer : ANSWER: D

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Last Answer : ANSWER: D

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in-----? A. 2 hours B. 5 hours C. 8 hours D. 10 hours (Answer)

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in-----? A. 2 hours B. 5 hours C. 8 hours D. 10 hours (Answer)

Last Answer : D. 10 hours (Answer)

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in------? A. 1 hours B. 5 hours C. 10 hours (Answer) D. 15 hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in------? A. 1 hours B. 5 hours C. 10 hours (Answer) D. 15 hours

Last Answer : C. 10 hours (Answer)

Can you damage your eyes if you look directly at a lit 100 watt bulb?

Description : Can you damage your eyes if you look directly at a lit 100 watt bulb?

Last Answer : It all depends on how far away you are, and how much ambient light there is already, But no, even holding your face eight inches away in a dark room won’t do any significant damage. Your pupils will contract so no damage is done.

How many lumens in a 150 watt bulb?

Description : How many lumens in a 150 watt bulb?

Last Answer : A 150 watt halogen bulb will give off somewhere around 2000lumens. These lights may give off up to about 2400 lumens.

Who invented the electric bulb? (1) Thomas More (2) Thomas Alva Edison (3) James Watt (4) None of these

Description : Who invented the electric bulb? (1) Thomas More (2) Thomas Alva Edison (3) James Watt (4) None of these

Last Answer : Thomas Alva Edison

A 10,000-watt motor operates an elevator weighing 5000 newtons. Assuming no frictional losses, how high is the elevator raised in 10 seconds. Is it raised: w) 2 meters x) 20 meters y) 50 meters z) 100 meters

Description : A 10,000-watt motor operates an elevator weighing 5000 newtons. Assuming no frictional losses, how high is the elevator raised in 10 seconds. Is it raised: w) 2 meters x) 20 meters y) 50 meters z) 100 meters

Last Answer : ANSWER: X -- 20 METERS

Can I put a 26 Watt energy saver (Equivalent to 100W) in a 60 Watt max lamp?

Description : Can I put a 26 Watt energy saver (Equivalent to 100W) in a 60 Watt max lamp?

Last Answer : yes. It’s equivalent in how much light it gives off compared to a 100W incandescent bulb. Those get much hotter.

Current in a 60 W light bulb when it is connected to a 230 V power supply is A. 0.26 A B. 1.5 A C. 2.6 A D. 3.9 A

Description : Current in a 60 W light bulb when it is connected to a 230 V power supply is A. 0.26 A B. 1.5 A C. 2.6 A D. 3.9 A

Last Answer : 0.26 A

A goodstrain of 700 m runs at a speed of 165 km/hr. A person traveling in it observes that the mail train moving in opposite direction takes 30 seconds to cross him. Find the speed of the mail train, if it is 750 m long. A) 8.4 m/s B) 5.3 m/s C) 2.5 m/s D) 6.8 m/s

Description : A goodstrain of 700 m runs at a speed of 165 km/hr. A person traveling in it observes that the mail train moving in opposite direction takes 30 seconds to cross him. Find the speed of the mail train, if it is 750 m long. A) 8.4 m/s B) 5.3 m/s C) 2.5 m/s D) 6.8 m/s

Last Answer : ANSWER:C Explanation:  Speed of goods train = 165km/hr  length of mail train (P) = 750m  length of goods train (Q) = 700m  Alternately, we can directly use the formula:  Time = ( p+q) / (v1+v2) sec  ( ...  45.833+v2 = 48.333  V2 = 2.5 m/s  Therefore the speed of the mail train is 2.5 m/s

What is the power of a bulb that uses 3 jolts every 10 seconds?

Description : What is the power of a bulb that uses 3 jolts every 10 seconds?

Last Answer : Feel Free to Answer

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

Twelve flags stand equidistant along the track at the stadium. The runners start at the first flag. A runner reaches the eighth flag 8 seconds after he starts. If he runs at an even speed, how many seconds does he need altogether to reach the twelfth flag? -Riddles

Description : Twelve flags stand equidistant along the track at the stadium. The runners start at the first flag. A runner reaches the eighth flag 8 seconds after he starts. If he runs at an even speed, how many seconds does he need altogether to reach the twelfth flag? -Riddles

Last Answer : Not 12 seconds. There are 7 segments from the first flag tot the eighth, and 11 from the first to the twelfth. He runs each segment in 8/7 seconds; therefore, 11 segments take 88/7= 12 4/7 seconds.

A person runs opposite to that of chandigarh train at a speed of 10km/hr. If the relative speed between train and the boy running in opposite direction is 25km/hr. What is the length of the train, if it takes 10 seconds to cross a boy, when is at rest? A) 36.6 m B) 40.6 m C) 43.6m D) 41.6m

Description :  A person runs opposite to that of chandigarh train at a speed of 10km/hr. If the relative speed between train and the boy running in opposite direction is 25km/hr. What is the length of the train, if it takes 10 seconds to cross a boy, when is at rest? A) 36.6 m B) 40.6 m C) 43.6m D) 41.6m

Last Answer : ANSWER : D  Explanation: Speed of person = 10km/hr  As the train and the running person are moving in opposite direction,therir speed values are added to find the relative speed.  Relative speed = speed of train + speed of ... s  Distance = speed * time = 25 / 6 * 10 = 250/6 m/s = 41.6 m

Which one of the following bulbs has the least resistance? a. 100 watt b. 200 watt c. 300 watt d. 60 watt

Description : Which one of the following bulbs has the least resistance? a. 100 watt b. 200 watt c. 300 watt d. 60 watt

Last Answer : c. 300 wat

Two 220 volt lamps, one of 60 watt and the other of 75 watt are connected in series across a 440 volt supply.

Description : Two 220 volt lamps, one of 60 watt and the other of 75 watt are connected in series across a 440 volt supply. The potential difference across 60 watt lamp will be: A) 195 volt B) 220 volt C) 245 volt D) 440 volt

Last Answer : Two 220 volt lamps, one of 60 watt and the other of 75 watt are connected in series across a 440 volt supply. The potential difference across 60 watt lamp will be: 245 volt

Would you have use for candelabra bulbs that were energy saving (CFL or LED), yet produced 75+ watt light equivalent?

Description : Would you have use for candelabra bulbs that were energy saving (CFL or LED), yet produced 75+ watt light equivalent?

Last Answer : answer:No, because I ate my vegetables when I was a kid and don't have a Daylight only restriction on my drivers license. Seriously though, like many people, my home lighting is 40W-equivalent for ... the lower wattage bulbs are plenty bright enough for most people. TL:DR - it's lack of demand.

Suppose that the number of instructions executed between page faults is directly proportional to the number of page frames allocated to a program. If the available memory is doubled, the mean interval between page faults is also doubled. Further, consider that a normal instruction takes one micro second, but if a page fault occurs, it takes 2001 micro seconds. If a program takes 60 sec to run, during which time it gets 15000 page faults, how long would it take to run if twice as much memory were available? (A) 60 sec (B) 30 sec (C) 45 sec (D) 10 sec

Description : Suppose that the number of instructions executed between page faults is directly proportional to the number of page frames allocated to a program. If the available memory is doubled, the mean interval between page faults is also ... memory were available? (A) 60 sec (B) 30 sec (C) 45 sec (D) 10 sec

Last Answer : Answer: C Explanation: T = Ninstr x 1µs + 15,000 x 2,000 µs = 60s Ninstr x 1µs = 60,000,000 µs - 30,000,000 µs = 30,000,000 µs Ninstr = 30,000,000 The number of instruction ... doesn't mean that the program runs twice as fast as on the first system. Here, the performance increase is of 25%.

How much energy does a light bulb uses every hour?

Description : How much energy does a light bulb uses every hour?

Last Answer : What is the answer ?

A car travelling at a speed of 60 km/hour is braked and comes to rest 6 seconds after the brakes are applied. The minimum coefficient of driction between the wheels and the road would be a.0.107 b.0.3 c.0.283 d.0.417 e.0.5

Description : A car travelling at a speed of 60 km/hour is braked and comes to rest 6 seconds after the brakes are applied. The minimum coefficient of driction between the wheels and the road would be a.0.107 b.0.3 c.0.283 d.0.417 e.0.5

Last Answer : c. 0.283

A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

Which has a greater speed, a heron that travels 60 meters in 60 seconds or a duck that travels 60 meters in 5 seconds. Explain?

Description : Which has a greater speed, a heron that travels 60 meters in 60 seconds or a duck that travels 60 meters in 5 seconds. Explain?

Last Answer : The heron is traveling 1 meter per second. The duck is traveling 12 meters per second. The duck is traveling faster.

While traveling in a straight line, a car uniformly changes its speed from 50 kilometers per hour to 110 kilometers per hour in 5 seconds. The acceleration of the car during this time is: w) 5 kilometers per hour per second x) 12 kilometers per hour per second y) 50 kilometers per hour per second z) 60 kilometers per hour per second

Description : While traveling in a straight line, a car uniformly changes its speed from 50 kilometers per hour to 110 kilometers per hour in 5 seconds. The acceleration of the car during this time is: w) 5 ... per hour per second y) 50 kilometers per hour per second z) 60 kilometers per hour per second

Last Answer : ANSWER: X -- 12 KILOMETERS PER HOUR PER SECOND

What is the equivalent of 100 watt incandescent light bulbs in LED light bulbs?

Description : What is the equivalent of 100 watt incandescent light bulbs in LED light bulbs?

Last Answer : That is a very good question, so I ended up doing a little research on the internet to find the information. It appears in order to match the intensity of a 100watt light bulb, you'll need 15watts of LED light bulbs.

Watt is a unit of - (1) Time (2) Power (3) Light (4) intensity of light

Description : Watt is a unit of - (1) Time (2) Power (3) Light (4) intensity of light

Last Answer : (2) Power

Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch

Last Answer : Answer: A

What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Description : What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Last Answer : Answer: C

Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

For a light detector, responsivity is measured in: a. amps per watt b. µW per amp c. mA per joule d. µsec per µW

Description : For a light detector, responsivity is measured in: a. amps per watt b. µW per amp c. mA per joule d. µsec per µW

Last Answer : a. amps per watt

For the case of flow of air past a wet bulb thermometer (air water vapour system), the approximate value of h2 /ky .Cz is around (A) 0.60 (B) 0.24 (C) 1 (D) 0.72

Description : For the case of flow of air past a wet bulb thermometer (air water vapour system), the approximate value of h2 /ky .Cz is around (A) 0.60 (B) 0.24 (C) 1 (D) 0.72

Last Answer : (C) 1

Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Description : Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Last Answer : a. 40 W bulb

Three 60 W bulbs are in parallel across the 230 V power line. If one bulb burns out

Description : Three 60 W bulbs are in parallel across the 230 V power line. If one bulb burns out

Last Answer : Three 60 W bulbs are in parallel across the 230 V power line. If one bulb burns out the other two bulbs will remain glowing

Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open?

Description : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open?

Last Answer : Three 60 W bulbs are in parallel across the 60 V power line. If one bulb burns open the other two bulbs will light.

Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Description : Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Last Answer : ANS: A