What oil to lubricate the chain on the bike?

Can I use frying oil?
by

1 Answer

Answer :

For example, oil for the "Atlantic" chain for 90 crowns. Or "Pure", "Vike" .....
by

Related questions

What to lubricate the chain on the bike

Description : Can I use table oil to lubricate the chain?

Last Answer : As an emergency solution, probably yes, but I would rather use engine oil.

How to Lubricate Your Bike Chain

Description : How to Lubricate Your Bike Chain

Last Answer : How to Lubricate Your Bike Chain For an old bicycle, the difference between a momentous trip from a dull one is having a well-lubricated bike chain. The lubricated chain makes the bike ... state, unless the links incurred damage. Damaged chains, instead of lubricating, should be replaced.

How does a bicycle chain lubricate?

Description : Can I use cooking oil?

Last Answer : Emergency yes - but in general machine oil (eg Konkor) or better oils with Teflon admixture are recommended (they are more waterproof and do not stick so much dust on them).

The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to (a) lubricate the contacts (b) insulate the contacts from switch body (c) extinguish the arc (d) all of the above (e) none of the above

Description : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to (a) lubricate the contacts (b) insulate the contacts from switch body (c) extinguish the arc (d) all of the above (e) none of the above

Last Answer : (c) extinguish the arc

What should I use to lubricate my manual treadmill?

Description : What should I use to lubricate my manual treadmill?

Last Answer : answer:I’m having trouble even picturing a manual treadmill. Maybe you could see if you still have the manual, or call the company who makes them?

How to lubricate the top of the cake?

Description : What do you lubricate to crack?

Last Answer : They're used to eggs, but if you're doing it with fat or a little water, it's good.

How to lubricate a tattoo?

Description : How to treat a tattoo to heal as soon as possible. I don't want to spread anything responsibly to keep it from getting infected, because it could end badly ...

Last Answer : I'm not an expert, but since I have a tattoo, I've been through the "healing" process after a tattoo. Immediately after the tattoo, the tattooed part is smeared and covered with foil to avoid ... stick to the wound enough at first. Remove the foil with a slow, gentle motion to avoid further injury.

Lubricate bolts when changing wheels at a car?

Description : Should the bolts be lubricated when changing wheels at the car or just the wheel hub or not at all? Thank you

Last Answer : I lubricate them with graphite grease

What to lubricate rusted pliers with?

Description : How to lubricate splitter pliers that are rusty and do not want to work?

Last Answer : They need to be cut off first. For relaxation and agitation, the WD 40, perhaps an even better MD40, could help, but it's time to let it go. Sometimes to loosen rust, soaking in kerosene or diesel ... WD 40 will be good and functional. Of course, another oil can also be used. But never kitchen.

how to lubricate the sealing rubber at the car door?

Description : How to lubricate car seals at the door? They are dry and cracking.

Last Answer : Glycerin. You can buy it in some drugstores and pharmacies. It is good to lubricate preventively before damage occurs. Just 1-2 times a year

What does the skis lubricate?

Description : I am a beginner skier, cross-country skiers are rubbing something

Last Answer : Need Answer

Do you lubricate your face with winter cream?

Description : When I have frost, my skin is dry, should I lubricate it with frost?

Last Answer : In general, I can't recommend it ... because it depends on what cream you use ... most creams contain large amounts of water and water and frost do not go well with each other ... choose a file greasy creams ..if you ... advise you ... which brand to use in the cold ...: D ☢ ☠ ☣ ☠ ☣ ☠ ☣ ☠ ☢

How to lubricate the factory door?

Description : The key j of the lock started to get stuck at my apartment door (it's hard to turn). Should I lubricate the factory? I guess I can't get there in oil, can I?

Last Answer : Go to a locksmith and buy a little Molyka - it lubricates better than graphite, otherwise it has similar properties.

Lubricate with solarium cream?

Description : Does one also have to apply cream as if one were sunbathing normally? Thank you

Last Answer : Need Answer

How to Lubricate Hurricane Shutters?

Description : How to Lubricate Hurricane Shutters?

Last Answer : To properly maintain hurricane shutters, you need to lubricatethem on the off season. Keeping hurricane shutters in properworking order is an important task, but it is a task that ... wasp nests arecommonly found on hurricane shutters, so inspect them carefullybefore possibly disturbing a hidd

How To Lubricate Folding Hurricane Shutters?

Description : How To Lubricate Folding Hurricane Shutters?

Last Answer : Hurricane shutters need to be regularly maintained just like anyother mechanical items that we may have around our homes. One thingthat folding hurricane shutters really need is plenty oflubrication in the ... that you need to do is rapidly and repeatedlyopen and shut the shutters. This movement

When replacing a power transistor fitted with a heat sink in a circuit, a coating of silicone grease is applied between the transistor case and the heat sink. This is done to ____________. A. lubricate the transistor B. lubricate the heat sink C. aid in the removal of the heat sink D. provide maximum heat transfer

Description : When replacing a power transistor fitted with a heat sink in a circuit, a coating of silicone grease is applied between the transistor case and the heat sink. This is done to ____________. A. lubricate ... the heat sink C. aid in the removal of the heat sink D. provide maximum heat transfer

Last Answer : Answer: D

Fixed gear peoples, would you ever put a chain Tensioner on your bike?

Description : Fixed gear peoples, would you ever put a chain Tensioner on your bike?

Last Answer : answer:I use one and I like it. [ I see no reason in why i shouldn’t use it ] Anyway it’s a matter of preferences here.

how to tighten the chain on a ten speed bike?

Description : how to tighten the chain on a ten speed bike?

Last Answer : the easiest thing to do is replace it. The chain is most likely stretched, a new one is 10–25 bucks and will make a world of difference

How can I tighten my bike chain?

Description : How can I tighten my bike chain?

Last Answer : a good resource is zinn and the art of road bike maintenance. i always have it near when i'm making any adjustments to my bike. i've never had to tighten my chain so i'm not sure how, but i ... i think it is relatively easy you might have to get a special chain tool at the bike store. good luck.

Does getting a new bike chain require getting a new cassete?

Description : Does getting a new bike chain require getting a new cassete?

Last Answer : answer:Sounds like you do put a lot of wear & tear on the thing. If you're averaging 80 mi./week for 50 weeks of the year, that's 4,000 miles you've logged. Chains do indeed ... Especially around shifting, as cables stretch, need proper tension, and derailleurs need to be aligned just so, etc.

How do I install a stationary bike chain?

Description : How do I install a stationary bike chain?

Last Answer : Yes, you can replace the chain on your stationary bike by yourself. You will need a few tools such as needle nose pliers and a screwdriver. The maintenance manual will have the instructions for you to follow.

What's the best way to clean dirty bicycle chain oil from chair upholstery?

Description : What's the best way to clean dirty bicycle chain oil from chair upholstery?

Last Answer : You are hosed. Try OxiClean.

What is the oil to gas ratio for a John Deere J3816 chain saw?

Description : What is the oil to gas ratio for a John Deere J3816 chain saw?

Last Answer : Need answer

Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Description : Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Last Answer : (D) Lump coal (fixed on chain grate)