While testing cables the galvanometer used should be initially ...

While testing cables the galvanometer used should be initially short-circuited in order to protect it from sudden initial inrush currents as the cable have:

by

1 Answer

Answer :

While testing cables the galvanometer used should be initially short-circuited in order to protect it from sudden initial inrush currents as the cable have: A high value of initial capacitance

by

Related questions

When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially

Description : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because  (A) Cables have a low value of capacitance which draws a high ... high value of charging current (D) Cables have a low value of capacitance and initial resistance

Last Answer : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because Cables have a high value of capacitance which draws a high value of charging current

In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor.

Description : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 

Last Answer : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 10 Ohm

A galvanometer has

Last Answer : A galvanometer has Eddy current damping.

In a ballistic galvanometer, the deflecting torque is proportional to

Last Answer :  In a ballistic galvanometer, the deflecting torque is proportional to the current through coil.

An Aryton shunt is used to make a D'Arsonval galvanometer into a

Last Answer : An Aryton shunt is used to make a D'Arsonval galvanometer into a multi range ammeter.

A ballistic galvanometer is used to measure:

Last Answer : A ballistic galvanometer is used to measure: Charge

The ballistic galvanometer is usually lightly damped so that:

Last Answer : The ballistic galvanometer is usually lightly damped so that: Amplitude of the first swing is large.

Most sensitive galvanometer is?

Last Answer : Most sensitive galvanometer is spot ballistic galvanometer.

A sensitive galvanometer produces large deflection for a?

Last Answer : A sensitive galvanometer produces large deflection for a small value of current.

Damping of the Ballistic galvanometer is made small to?

Last Answer : Damping of the Ballistic galvanometer is made small to get first deflection large.

When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially...

Description : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is ?

Last Answer : When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is all right.

Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Description : Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Last Answer : ans a

In an isolated system two cars each with a mass of 1000 kg collide car 1 is initially at rest while car 2was moving at10ms what is the magnitude of their combined momentum after the collision?

Description : In an isolated system two cars each with a mass of 1000 kg collide car 1 is initially at rest while car 2was moving at10ms what is the magnitude of their combined momentum after the collision?

Last Answer : What is the answer ?

In an isolated system two cars each with a mass of 1500 kg collide car 1 is initially at rest while car 2 was moving at 5ms. What is their combined momentum after collision?

Description : In an isolated system two cars each with a mass of 1500 kg collide car 1 is initially at rest while car 2 was moving at 5ms. What is their combined momentum after collision?

Last Answer : Need answer

The cow while standing up from the sitting posture initially takes support and puts its body weight on: (a) patellas of the forelegs (b) shanks of the forelegs (c) both the forelegs (d) the patellas and shanks of both the fore and hind legs

Description : The cow while standing up from the sitting posture initially takes support and puts its body weight on: (a) patellas of the forelegs (b) shanks of the forelegs (c) both the forelegs (d) the patellas and shanks of both the fore and hind legs

Last Answer : Ans:(a)

After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask patient to bite firmly while impression is setting B. Hold the metal base frame against the abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

Will a car battery charger ruin my battery if I accidentally reverse the cables while charging?

Description : Will a car battery charger ruin my battery if I accidentally reverse the cables while charging?

Last Answer : Yes it will damage your battery if you reverse the cables. There is an article on Wikipedia about it at this link http://en.wikipedia.org/wiki/Rechargeable_battery.

While starting a main propulsion synchronous motor, the ammeter pegs out at maximum and then returns to the proper value after synchronization. This indicates the _____________. A. motor has started properly B. field windings are grounded C. slip rings are dirty D. power transmission cables are grounded

Description : While starting a main propulsion synchronous motor, the ammeter pegs out at maximum and then returns to the proper value after synchronization. This indicates the _____________. A. motor has started ... field windings are grounded C. slip rings are dirty D. power transmission cables are grounded

Last Answer : Answer: A

What are precautions to be taken while doing maintenance or repair work on power cables?

Description : What are precautions to be taken while doing maintenance or repair work on power cables?  

Last Answer : A research organised by EPRI (electric power research institute) on medium voltage XLPE cables found that DC high potential at 80% of the factory value a. Subsequently reduces the life of ... of cramped conductor strands is achieved otherwise it will add resistance and create over heating. 

State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) Minimum clearance between cable and water pipe line when running in parallel. (iii) If cable is laid through pipe what should be diameter of pipe. (iv) When more than one cable is to be laid in the same trench, what should be minimum spacing between two cables ?

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables 

Who invented the galvanometer ?

Last Answer : : Discovered Galvanometer (Under Mary Ampere)

Assertion current sensitivity of a galvanometer is directley proportionall to the current through the coil. Reason Voltage sensitivity is inversely pr

Description : Assertion current sensitivity of a galvanometer is directley proportionall to the current through the coil. Reason Voltage sensitivity is inversely pr

Last Answer : Assertion current sensitivity of a galvanometer is directley proportionall to the current ... sensitivity is inversely proportional to voltage.

The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Description : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Last Answer : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a ... D. current sensitivity is `40 deg` `A^(-1)`

In order to increase the sensitivity of a moving coil galvanometer, one should decrease

Description : In order to increase the sensitivity of a moving coil galvanometer, one should decrease

Last Answer : In order to increase the sensitivity of a moving coil galvanometer, one should decrease A. the strength of ... in its coil D. the area of its coil

In a moving coil galvanometer, the deflection of the coil q is related to the electrical current i by the relation

Description : In a moving coil galvanometer, the deflection of the coil q is related to the electrical current i by the relation

Last Answer : In a moving coil galvanometer, the deflection of the coil q is related to the electrical current i by the ... theta^(2)` D. `I prop sqrt(theta)`

The pole pieces of the magnet used in a pivoted coil galvanometer are

Description : The pole pieces of the magnet used in a pivoted coil galvanometer are

Last Answer : The pole pieces of the magnet used in a pivoted coil galvanometer are A. plane surfaces of a ... magnet D. cylindrical sufaces of a horse-shoe magnet

In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and `R = 100 Omega`, the galvanometer `(G

Description : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and `R = 100 Omega`, the galvanometer `(G

Last Answer : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and ` ... A. 4 V B. 2 V C. 12 V D. 6 V

A galvanometer having resistance of `50 Omega` requires a current of `100 Omega A` to given full scale deflection. How much resistance is required to

Description : A galvanometer having resistance of `50 Omega` requires a current of `100 Omega A` to given full scale deflection. How much resistance is required to

Last Answer : A galvanometer having resistance of `50 Omega` requires a current of `100 Omega A` to given full scale ... in series D. `10^(5)Omega` in parallel

A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Description : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Last Answer : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. ... Omega` C. `1000 Omega` D. `1800 Omega`

A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. To convert this galvanometer to a voltmeter of ful

Description : A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. To convert this galvanometer to a voltmeter of ful

Last Answer : A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. ... Omega` in series D. `12010 Omega` in parallel

In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the resistance of ammeter will be

Description : In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the resistance of ammeter will be

Last Answer : In a ammeter `0.2%` of main current passes through the galvanometer. If resistance of galvanometer is `G`, the ... 1)/(500)G` D. `(500)/(499)G`

A galvanometer of resistance `50 Omega` is connected to a battery of 8 V along with a resistance of `3950 Omega` in series. A full scale deflection of

Description : A galvanometer of resistance `50 Omega` is connected to a battery of 8 V along with a resistance of `3950 Omega` in series. A full scale deflection of

Last Answer : A galvanometer of resistance `50 Omega` is connected to a battery of 8 V along with a resistance of `3950 Omega ... `. A. 1950 B. 7900 C. 2000 D. 7950

A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Description : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Last Answer : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage ... `10^(3)` D. `10^(5)`

The scale of a galvanometer of resistance `100 ohms` contains 25 divisions. It gives a defelction of one division on passing a current of `4xx 10 ^(-4

Description : The scale of a galvanometer of resistance `100 ohms` contains 25 divisions. It gives a defelction of one division on passing a current of `4xx 10 ^(-4

Last Answer : The scale of a galvanometer of resistance `100 ohms` contains 25 divisions. It gives a defelction of one division ... is A. 150 B. 170 C. 110 D. 220

A moving coil galvanometer is converted into an ammeter reads upto `0.03 A` by connecting a shunt of resistance `4r` across it and ammeter reads up `0

Description : A moving coil galvanometer is converted into an ammeter reads upto `0.03 A` by connecting a shunt of resistance `4r` across it and ammeter reads up `0

Last Answer : A moving coil galvanometer is converted into an ammeter reads upto `0.03 A` by connecting a shunt of resistance `4r` ... `0.02A` C. `0.03A` D. `0.04A`

When a resistance of 100`Omega` is connected in series with a galvanometer of resistance R, then its range is V. To double its range, a resistance of

Description : When a resistance of 100`Omega` is connected in series with a galvanometer of resistance R, then its range is V. To double its range, a resistance of

Last Answer : When a resistance of 100`Omega` is connected in series with a galvanometer of resistance R, then its range ... 800`Omega` C. 900`Omega` D. 100`Omega`

A galvanometer of resistance `50 Omega ` is connected to a battery of `3 V` along with resistance of `2950 Omega` in series. A full scale deflection o

Description : A galvanometer of resistance `50 Omega ` is connected to a battery of `3 V` along with resistance of `2950 Omega` in series. A full scale deflection o

Last Answer : A galvanometer of resistance `50 Omega ` is connected to a battery of `3 V` along with resistance of `2950 ... `Omega` C. 5550 `Omega` D. 6050 `Omega`

To send 10% of the main current through a moving coil galvanometer of resistance `99omega`, the shunt required is –

Description : To send 10% of the main current through a moving coil galvanometer of resistance `99omega`, the shunt required is –

Last Answer : To send 10% of the main current through a moving coil galvanometer of resistance `99omega`, the shunt ... `11Omega` C. `10Omega` D. `9.9Omega`

In a potentiometer experiment, the galvanometer shows no deflection when a cell is connected across `60 cm` of the potentiometer wire. If the cell is

Description : In a potentiometer experiment, the galvanometer shows no deflection when a cell is connected across `60 cm` of the potentiometer wire. If the cell is

Last Answer : In a potentiometer experiment, the galvanometer shows no deflection when a cell is connected across `60 cm` of ... ` C. `1.2Omega` D. `1.5Omega`

`AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm` and `CB = 80 cm`. The resistance `R` is eq

Description : `AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm` and `CB = 80 cm`. The resistance `R` is eq

Last Answer : `AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm ... ` B. `8Omega` C. `20Omega` D. `40Omega`

What is stable galvanometer?

Description : What is stable galvanometer?

Last Answer : When current is passed throgh a galvanometer, the coiloscillates about its mean position before it comes to rest.To bring the coil to rest immediately, the coil is wound on ametallic ... .Since the oscillation of the coil die out instantaneously, thegalvanometer is called dead beat galvanometer.

Why galvanometer show opposite deflection?

Description : Why galvanometer show opposite deflection?

Last Answer : What is the answer ?

The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

A galvanometer can be converted to a voltmeter by connecting – (1) a high resistance in parallel (2) a high resistance in series (3) a low resistance in series (4) a low resistance in parallel

Description : A galvanometer can be converted to a voltmeter by connecting – (1) a high resistance in parallel (2) a high resistance in series (3) a low resistance in series (4) a low resistance in parallel

Last Answer : (2) a high resistance in series Explanation: In order to convert a Galvanometer into voltmeter, a very high resistance known as "series resistance" is connected in series with the ... made for enabling the galvanometer to measure the potential difference across any component in a circuit.

A galvanometer can be converted into a voltmeter by connecting with it a – (1) high resistance in parallel (2) low resistance on parallel (3) high resistance on series (4) low resistance in series

Description : A galvanometer can be converted into a voltmeter by connecting with it a – (1) high resistance in parallel (2) low resistance on parallel (3) high resistance on series (4) low resistance in series

Last Answer : (3) high resistance on series Explanation: In order to convert a Galvanometer into voltmeter, a very high resistance known as "series resistance" is connected in series with the galvanometer ... made for enabling the galvanometer to measure the potential difference across any component in a circuit.

What is the name of the device used to convert alternating cur-rent into direct current? (1) Amreter (2) Galvanometer (3) Rectifier (4) Transformer

Description : What is the name of the device used to convert alternating cur-rent into direct current? (1) Amreter (2) Galvanometer (3) Rectifier (4) Transformer

Last Answer : (3) Rectifier Explanation: A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The process is known as rectification.

Which instrument is used to measure depth of ocean? (1) Galvanometer (2) Fluxmeter (3) Endoscope (4) Fathometer

Description : Which instrument is used to measure depth of ocean? (1) Galvanometer (2) Fluxmeter (3) Endoscope (4) Fathometer

Last Answer : (4) Fathometer Explanation: Galvanometer - measures electric current, Fluxmeter - measures magnetic flux, Endoscope - used to examine internal parts of the body.