1 Answer

Answer :

The main printed circuit board of a computer is called mother board.

Related questions

Description : In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Last Answer : Answer: B

Description : To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should _______. A. ground the board B. avoid reversing the polarity of the leads C. isolate sensitive components with heat sinks D. all of the above

Last Answer : Answer: B

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Last Answer : Answer: D

Description : Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic ... cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Last Answer : Answer: B

Description : PCB stands for: a) Process Control Block b) Printed Circuit Board c) Both of The Above d) None of The Above

Last Answer : c) Both of The Above

Description : Multilayer printed circuit board repair is the responsibility of what 2M repair technician?

Last Answer : Microminiature repair technician.

Description : When does most printed circuit board damage occur?

Last Answer : During disassembly or repair.

Description : What is the requirement of mother board in computer ?

Last Answer : There are many requirements for mother board. Because the computer has a microprocessor , main memory and other essential parts of the computer with the motherboard. Other components include ... devices are also connected to the motherboard. Computer cannot be imagined without the motherboard.

Description : What is a microtic device or router board ?

Last Answer : Microtic device or router board: Microtic router board looks a lot like any other router or switch. This device has one port for internet connection and LAN port for local area network. However, there may be more than ... RB 751 (wireless), RB 951 (wireless), RB 450G, RB 1100, RB 1100AH X2 etc.

Description : What is On-Board Diagnostic (OBD) ?

Last Answer : On-board diagnostic ( OBD) is a special system applied to almost all engine components. On-board diagnostic systems have different components such as sensors , actuators and electronic control units ( ECUs) . ... a "check engine" light) that alerts the user if there is a problem with the engine.

Description : What is a bulletin board ?

Last Answer : A bulletin board is a powerful board that connects the central computer to other less powerful computers via a telephone line.

Last Answer : The main technology of computer to computer information exchange - Internet.

Last Answer : There are two main parts of computer system - hardware and software.

Last Answer : The main feature of the fifth generation computer is - artificial intelligence.

Description : Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Last Answer : Answer : B

Description : The main circuit-board of the system unit is _______ (A) RAM (B) Mother Board (C) Hard disk (D) None of the Above

Last Answer : (B) Mother Board

Description : A reverse-current relay will prevent AC generator motorization by ____________. A. automatically redirecting the load B. automatically speeding up the prime mover C. tripping the panel board main switch D. tripping the generator circuit breaker

Last Answer : Answer: D

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : Motherboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : b. Motherboard

Description : Personal Computers use a number of chips mounted on a main circuit board. What is the common name for such boards? A. Mother boards B. Daughter boards C. Father boards D. Bread boards 

Last Answer : Personal Computers use a number of chips mounted on a main circuit board. Mother boards is the common name for such boards.

Description : When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors ... circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Last Answer : Answer: A

Description : What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they ... . Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Last Answer : Answer: A

Description : What is one of the major disadvantages of multilayer printed circuit boards?

Last Answer : Difficulty of repair of internal connections.

Description : Name the three methods of interconnecting components in multilayer printed circuit boards.

Last Answer : Clearance hole, plated-through hole, and layer build-up

Description : What is the major disadvantage of printed circuit boards?

Last Answer : Components soldered in place.

Description : List the major advantages of printed circuit boards.

Last Answer : Eliminate heavy chassis and point-to-point wiring

Description : Explain the logic circuit that is useful for interpreting mechanical language in human language ?

Last Answer : Decoder is the logic circuit that is useful for interpreting mechanical language in human language. A circuit that has a large number of inputs is called a decoder. The decoder is needed to make the information written in the code language in the output unit of the computer understandable to human.

Description : Explain the main features of the first printed Bible. -SST 10th

Last Answer : (i) About 180 copies were printed ar.d it took three years to produce them. (ii) The text was printed in the new Gutenberg press with metal type, but the borders were carefully designed, ... page of each copy was different. (iv) Different colours were used within the letters in various places.

Description : Explain the main features of the first printed Bible. -SST 10th

Last Answer : Main features of the first printed Bible were : (i) About 180 copies of the Bible were printed and it took three years to produce them. (ii) The text was printed in the New Gutenberg press ... by hand. (v) Gutenberg printed the text in black leaving spaces where the colour could be filled later.

Description : A Personal Computer uses a number of chips mounted on a circuit board called (A) Microprocessor (B) System Board (C) Daughter Board (D) Mother Board 

Last Answer : (D) Mother Board

Description : What are the main components of digital content ?

Last Answer : Digital content can be divided into four main categories.

Description : What is the main type of video graphialhamdulillah ?

Last Answer : Video is the main running type of graphic.

Description : What are the main types of current ?

Last Answer : There are mainly three types of current namely- AC current DC current AD current

Description : What is the reason for losing their content / cache and main memory due to power outage ?

Last Answer : Cache and main memory lose their content due to power outage . They are volatile so they lose information .

Description : What are the main functions of DBMS ?

Last Answer : Answer : The three main functions of DBMS are a) Database creation. B) Database interrogation and c) Database maintenance.

Description : What is the name of the main source of knowledge in today's world ?

Last Answer : Website is usually the name of the main source of knowledge .

Description : What are the main similarities between Twitter and Facebook ?

Last Answer : The main similarity between Twitter and Facebook is that both can be followed.

Description : Which bus connects all the internal components of a computer such as CPU and memory to the main board(motherboard)? A. Expansion Bus B. External Bus C. Internal Bus D. None of the Above

Last Answer : C. Internal Bus

Description : What is the news paper seen on the computer screen called ?

Last Answer : A newspaper seen on a computer screen is called an online magazine.

Description : What is the flashing symbol on the computer screen called ?

Last Answer : The flashing symbol on a computer screen is called a cursor.

Description : What is the process of transferring files from Internet to computer called ?

Last Answer : The process of transferring files from Internet to computer is called downloading.

Description : Which is the best choice for party invites - free ones with glued on insert or computer-printed that I have to pay for?

Last Answer : I think it's perfectly fine to use the free ones. You may have to make yourself a little jig, or make sure to put little tiny pencil dots (very lightly so you can erase or cover them the insert) when ... you don't have one, to make sure that your print-outs get cut straight. Save money when you can.

Description : Do Justice stores accept justice coupons printed from a computer?

Last Answer : Justice will accept coupons that have been printed from a computer. However these coupons must be printed from a legitimate website.

Description : The following are electronic record a) Record which is printed on a paper. b) Record which is stored , recorded, or copied in optical or magnetic media  produced by computer c) Both A & B d) Neither A nor B

Last Answer : c) Both A & B

Description : can read any printed character by comparing the pattern that is stored in the computer: a. SP b. CCR Cc. RAG d. OCR

Last Answer : d. OCR

Description : Softcopy is the intangible output, so then what is hardcopy? a) The physical parts of the computer b) The printed parts of the computer c) The printed output d) The physical output devices e) None of these

Last Answer : c) The printed output