List the major advantages of printed circuit boards.

List the major advantages of printed circuit boards.
by

1 Answer

Answer :

Eliminate heavy chassis and point-to-point wiring
by

Related questions

What is one of the major disadvantages of multilayer printed circuit boards?

Description : What is one of the major disadvantages of multilayer printed circuit boards?

Last Answer : Difficulty of repair of internal connections.

What is the major disadvantage of printed circuit boards?

Description : What is the major disadvantage of printed circuit boards?

Last Answer : Components soldered in place.

Name the three methods of interconnecting components in multilayer printed circuit boards.

Description : Name the three methods of interconnecting components in multilayer printed circuit boards.

Last Answer : Clearance hole, plated-through hole, and layer build-up

Multilayer printed circuit board repair is the responsibility of what 2M repair technician?

Description : Multilayer printed circuit board repair is the responsibility of what 2M repair technician?

Last Answer : Microminiature repair technician.

When does most printed circuit board damage occur?

Description : When does most printed circuit board damage occur?

Last Answer : During disassembly or repair.

What combination of materials is used to patch or build up damaged areas of boards?

Description : What combination of materials is used to patch or build up damaged areas of boards?

Last Answer : Epoxy and fiberglass powder.

What is the preferred method of repairing cracked runs on boards?

Description : What is the preferred method of repairing cracked runs on boards?

Last Answer : Clinched staple.

In what direction are component leads clinched on single and double-sided boards?

Description : In what direction are component leads clinched on single and double-sided boards?

Last Answer : In the direction of the run.

Black substance on circuit boards?

Description : Black substance on circuit boards?

Last Answer : We coat all our circuits with a conformal coating to protect the leads and contacts to protect them from environmental issues. At the speeds the circuits are running, any two neighboring leads act as ... The added step costs money but it is well worth it for the manufacturer and the customer.

Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Description : Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Last Answer : Answer : B

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : Motherboard

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : d. Breadboard

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : b. Motherboard

The first widely used commercial form of Artificial Intelligence (Al) is being used in many popular products like microwave ovens, automobiles and plug in circuit boards for desktop PCs. What is name of AI? A. Boolean logic B. Human logic C. Fuzzy logic D. Functional logic

Description : The first widely used commercial form of Artificial Intelligence (Al) is being used in many popular products like microwave ovens, automobiles and plug in circuit boards for desktop PCs. What is name of AI? A. Boolean logic B. Human logic C. Fuzzy logic D. Functional logic

Last Answer : C. Fuzzy logic 

List seven advantages of fiber optics over electrical systems.

Description : List seven advantages of fiber optics over electrical systems.

Last Answer : Advantages of fiber optics are improved system performance, immunity to electrical noise, signal security, electrical isolation, reduced size and w

Why custom printed Envelopes are getting popular these days and what are the advantages of these envelops and where I can get them?

Description : Why custom printed Envelopes are getting popular these days and what are the advantages of these envelops and where I can get them?

Last Answer : Envelopes are a part of our daily routine if we are running a business of any kind. These are small, lightweight, and easy to carry products that can play a much bigger role than our expectations. ... them to others. Printing the text and graphics on these can be made worth-seeing in various ways.

Why custom printed wedding Cards are getting popular these days and what are the advantages of customized wedding cards and where I can get them?

Description : Why custom printed wedding Cards are getting popular these days and what are the advantages of customized wedding cards and where I can get them?

Last Answer : A marriage is a concept common in almost all the cultures of the world. When a date is decided to carry out this function, people are expected to be called on it. That is where the need ... design created under our banner is unique in its nature. Our firm takes pride in bringing forth the product

Why custom printed envelops are getting popular these days and what are the advantages of customized envelops and where i can get them?

Description : Why custom printed envelops are getting popular these days and what are the advantages of customized envelops and where i can get them?

Last Answer : Envelopes are a part of our daily routine if we are running a business of any kind. These are small, lightweight, and easy to carry products that can play a much bigger role than our ... mails from one corner to the other corner of the globe. People utilize them for delivering their lett

How did China remain a major producer of printed materials for a long time ? -SST 10th

Description : How did China remain a major producer of printed materials for a long time ? -SST 10th

Last Answer : (i) Hand Printing : The earliest kind of print technology was developed in China, Japan and Korea. This was a system of hand printing. From AD 594 on wards, books in China were ... catering to the Western-style schools. From hand printing there was now a gradual shift to mechanical printing.

How did China remain a major producer of printed materials for a long time ? -SST 10th

Description : How did China remain a major producer of printed materials for a long time ? -SST 10th

Last Answer : Textbooks for the civil service examination were printed in vast numbers under the sponsorship of the imperial state (ii) Merchants used print in their everyday life as they collected trade information. ( ... (iv) Rich women began to read and many women began publishing their poetry and plays.

Who was the major producer of printed material in China ? -SST 10th

Description : Who was the major producer of printed material in China ? -SST 10th

Last Answer : The Imperial Slate in China was the major producer of printed material. The textbooks were used by the students appearing for service examination.

Why is China called the major producer of printed material? -SST 10th

Description : Why is China called the major producer of printed material? -SST 10th

Last Answer : . The imperial state in China was, for a very long time, the major producer of printed material. . China possessed a huge bureaucratic system which recruited its personnel through the civil service ... From the 16th century, the number of candidates went up and that increased the volume of print.

Why was China a major producer of printed material for a long time? -SST 10th

Description : Why was China a major producer of printed material for a long time? -SST 10th

Last Answer : China had a huge bureaucratic system. The personnel for this system was chosen on the basis of a Civil Service Examination. To help the candidates, textbooks for this examination were printed in ... In the 16th century, when more candidates were recruited, more printed material appeared in public.

What is the main printed circuit board of a computer called ?

Last Answer : The main printed circuit board of a computer is called mother board.

When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors are tight B. test each resistor and capacitor on the card with an ohmmeter C. check the continuity of all printed circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Description : When troubleshooting a console circuit card suspected of being faulty, first check operating voltages, clean the card and then _________________. A. make sure wired connections and push-on connectors ... circuit traces with an ohmmeter D. measure the gain of each transistor or integrated circuit

Last Answer : Answer: A

What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they occur. C. Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Description : What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they ... . Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Last Answer : Answer: A

To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should _______. A. ground the board B. avoid reversing the polarity of the leads C. isolate sensitive components with heat sinks D. all of the above

Description : To avoid damaging the components of a printed circuit board when testing it with a DC volt-ohmmeter, you should _______. A. ground the board B. avoid reversing the polarity of the leads C. isolate sensitive components with heat sinks D. all of the above

Last Answer : Answer: B

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Last Answer : Answer: D

In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Description : In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Last Answer : Answer: B

Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic fluxes would cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Description : Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic ... cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Last Answer : Answer: B

PCB stands for: a) Process Control Block b) Printed Circuit Board c) Both of The Above d) None of The Above

Description : PCB stands for: a) Process Control Block b) Printed Circuit Board c) Both of The Above d) None of The Above

Last Answer : c) Both of The Above

Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Description : Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Last Answer : Two advantages of voltage divider biasing of BJT. 1. It is very simple method of transistor biasing. 2. The biasing conditions can be very easily set. 3. there is no loading of ... 5. The resistor RE introduces a negative feedback. So all the advantages of negative feedback are obtained. 

Can I use multiple Arduino boards in a single project?

Description : Can I use multiple Arduino boards in a single project?

Last Answer : Yes, multiple Arduino boards can be used in a single project by connecting them together through various communication protocols, such as I2C or SPI.

Do white boards remember?

Description : Do white boards remember?

Last Answer : There is if it is not cleaned properly. But if you use cleaning fluid and an eraser, it is gone as if it was chalk on a blackboard.

Will the Internet Movie Data Base (IMDb) ever reinstate its message / discussion boards?

Description : Will the Internet Movie Data Base (IMDb) ever reinstate its message / discussion boards?

Last Answer : answer:Based on my past experience with Internet discussion boards (and it's considerable). Once a website's gods have decided the interactive functions are more of a hassle than a desirable feature, they ... of luck. I'd start looking for a new movie-discussion site. @filmfann might know of one.

Do you believe that Ouija boards are actually being used to contact the spirit world?

Description : Do you believe that Ouija boards are actually being used to contact the spirit world?

Last Answer : Fuck no.

Are you scared of ouija boards?

Description : Are you scared of ouija boards?

Last Answer : Yes. They creep me out. I used to play with one as a teen, but all the scary movies portray them as conjuring up the hubs of hell. Yes, that was too strange.

How often do you see bulletin boards?

Description : How often do you see bulletin boards?

Last Answer : Other than Craigslist? lol

Can dart boards dry out or not?

Description : Can dart boards dry out or not?

Last Answer : They can, but it takes a long time in an inhospitable environment to do so. It really depends on how dry the air is.

Are you, or have you been a member of any boards or organizations? If so, do the people in charge bicker and exhibit their personality differences?

Description : Are you, or have you been a member of any boards or organizations? If so, do the people in charge bicker and exhibit their personality differences?

Last Answer : Yup, yeah,yes, oh yes,you bet, sometimes, and sometimes.

How do you feel about Ouija boards?

Description : How do you feel about Ouija boards?

Last Answer : Harmless toy. Fun, though.

How to know what PCB boards go with what hard drive?

Description : How to know what PCB boards go with what hard drive?

Last Answer : More detail and a better formed question might help to know what you are looking for.

If kids Twitter about their teachers, can they be policed by school boards?

Description : If kids Twitter about their teachers, can they be policed by school boards?

Last Answer : Do Canadians have as much ‘free speech’ as Americans theoretically do? I’m not really up on Canadian law.

Render full 3d Images of Eagle Cad Boards?

Description : Render full 3d Images of Eagle Cad Boards?

Last Answer : Don’t know for sure but check-out THIS. It will read and display 3-D for AutoCAD .

What can I build with some leftover 2'x4' boards?

Description : What can I build with some leftover 2'x4' boards?

Last Answer : answer:A tree house? Any small children in your life or nearby? Or for something more modest yet still charming? Broccoli house

Is there a market for custom made backgammon boards?

Description : Is there a market for custom made backgammon boards?

Last Answer : There are people out there that will buy anything that is custom made if it is quality work.

What would you call the face cut-out boards that you stand behind for photographs?

Description : What would you call the face cut-out boards that you stand behind for photographs?

Last Answer : Silly.