What is the amount of noise in a jet engine ?

What is the amount of noise in a jet engine ?
by

1 Answer

Answer :

The noise level of jet engine is 110 to 140 dB
by

Related questions

Noise level heard at a distance of about 100 metres from a jet engine with after burner is about __________ decibels. (A) 120 (B) 140 (C) 170 (D) 200

Description : Noise level heard at a distance of about 100 metres from a jet engine with after burner is about __________ decibels. (A) 120 (B) 140 (C) 170 (D) 200

Last Answer : (C) 170

A jet engine works, on the principle of conservation of - (1) linear momentum (2) angular momentum (3) energy (4) mass

Description : A jet engine works, on the principle of conservation of - (1) linear momentum (2) angular momentum (3) energy (4) mass

Last Answer : (1) linear momentum Explanation: Linear momentum is a vector quantity defined as the product of an object's mass, m, and its velocity, v. Linear momentum is denoted by the letter p and is called ... for short: Note that a body's momentum is always in the same direction as its velocity vector.

The most efficient heat engine that can operate between two temperature reservoirs T1 and T2 is: w) jet engine x) internal combustion engine y) Carnot engine (pron: car-no) z) steam engine

Description : The most efficient heat engine that can operate between two temperature reservoirs T1 and T2 is: w) jet engine x) internal combustion engine y) Carnot engine (pron: car-no) z) steam engine

Last Answer : ANSWER: Y -- CARNOT ENGINE

. Noise level inside a jet airliner in normal flight is about __________ decibels. (A) 80 (B) 100 (C) 125 (D) 150

Description : . Noise level inside a jet airliner in normal flight is about __________ decibels. (A) 80 (B) 100 (C) 125 (D) 150

Last Answer : (B) 100

A jet engine works on the principle of a.Conservation of energy b.Conservation of mass and momentum c.Conservation of linear mementum d.Conservation of energy and momentum e.Conservation of mass

Description : A jet engine works on the principle of a.Conservation of energy b.Conservation of mass and momentum c.Conservation of linear mementum d.Conservation of energy and momentum e.Conservation of mass

Last Answer : c. Conservation of linear mementum

Satellite engine uses A. jet propulsion B. ion propulsion system C. liquid fuel D. solar jet

Description : Satellite engine uses A. jet propulsion B. ion propulsion system C. liquid fuel D. solar jet

Last Answer : B. ion propulsion system

Satellite engine use A. liquid fuel B. jet propulsion C. ion propulsion system D. solar jet

Description : Satellite engine use A. liquid fuel B. jet propulsion C. ion propulsion system D. solar jet

Last Answer : C. ion propulsion system

__________ is used as jet engine fuel. (A) Petrol (B) Diesel(C) Kerosene(D) LPG

Description : __________ is used as jet engine fuel. (A) Petrol (B) Diesel (C) Kerosene (D) LPG

Last Answer : (C) Kerosene

A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Last Answer : (C) Investment casting

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

If a jet engine fails during take-off before V1: a. The take-off can be continued or aborted b. The take-off should be aborted c. The take-off should be continued d. The take-off may be continued if the aircraft speed is above VMCG and lies between VGO and VSTOP

Description : If a jet engine fails during take-off before V1: a. The take-off can be continued or aborted b. The take-off should be aborted c. The take-off should be continued d. The take-off may be continued if the aircraft speed is above VMCG and lies between VGO and VSTOP

Last Answer : b. The take-off should be aborted

How do you control power in a jet engine

Description : How do you control power in a jet engine

Last Answer : B. by controlling the fuel flow

How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Description : How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Last Answer : b. By controlling the fuel flow

If a jet engine fails during take-off before V1: a. The take-off can be continued or aborted b. The take-off should be aborted c. The take-off should be continued d. The take-off may be continued if the aircraft speed is above VMCG and lies between VGO and VSTOP

Description : If a jet engine fails during take-off before V1: a. The take-off can be continued or aborted b. The take-off should be aborted c. The take-off should be continued d. The take-off may be continued if the aircraft speed is above VMCG and lies between VGO and VSTOP

Last Answer : b. The take-off should be aborted

How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Description : How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Last Answer : b. By controlling the fuel flow

Who invented the Jet Engine? (1) Karl Benz (2) Sir Frank Whittle (3) Thomas Savery (4) Michael Faraday

Description : Who invented the Jet Engine? (1) Karl Benz (2) Sir Frank Whittle (3) Thomas Savery (4) Michael Faraday

Last Answer : Sir Frank Whittle

Following are the components of jet engine

Description : Following are the components of jet engine

Last Answer : Following are the components of jet engine: 1. Air intakes 2. Compressors 3. Combustors 4. Turbines 5. Afterburners (reheat) 6. Nozzle 7. Bypass duct 8. Shaft

Which purified oil does Aviation fuel for jet aeroplanes consist?

Description : Which purified oil does Aviation fuel for jet aeroplanes consist?

Last Answer : – Kerosene

Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Description : Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Last Answer : D. Both B and C

The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Description : The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Last Answer : A. 10.5 dB

Why not reduce the noise in the core by reducing the amount of flux?

Description : Why not reduce the noise in the core by reducing the amount of flux?

Last Answer : Transformer voltages are fixed by system requirements. The ratio of these voltages to the number of turns in the winding determines the amount of magnetization. This ratio of voltage to turns is determined ... flux at the normal voltage is fixed. This also fixes the level of noise and vibration.

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

Why do **** glasses emit static noise?

Description : Why do wine glasses emit static noise?

Last Answer : This is called seashell resonance.

What is noise ?

Last Answer : The word which is painful and annoying for the feeling is called noise noise.

Negative feedback in amplifiers – (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and in-creases noise (4) decreases bandwidth and increases noise

Description : Negative feedback in amplifiers – (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and in-creases noise (4) decreases bandwidth and increases noise

Last Answer : (1) increases bandwidth and decreases noise Explanation: Voltage gain, input impedance, output impedance, bandwidth etc. are few important characteristics of an amplifier. These parameters are more or ... be controlled. This can be conveniently achieved by employing a technique, called the feedback.

The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Description : The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Last Answer : (1) decibel Explanation: Noise pollution refers to any unpleasant, damaging or irritating noise that has the potential to harm people, wildlife or the environment. The decibel (dB) is the main unit used ... can also be measured. by its pitch, which is the frequency of sound vibrations per second.

Permissible noise level at Residential area during night time is : (1) 45 dB (2) 55 dB (3) 75 dB (4) 80 dB

Description : Permissible noise level at Residential area during night time is : (1) 45 dB (2) 55 dB (3) 75 dB (4) 80 dB

Last Answer : (1) 45 dB Explanation: As per the norm, the permissible noise level in residential areas is 45 db during night time, 55 db during day and in commercial areas it is 55 db during night and 65 db during day.

Noise is measured in – (1) Watt (2) REM (3) Centigrade (4) Decibel

Description : Noise is measured in – (1) Watt (2) REM (3) Centigrade (4) Decibel

Last Answer : (4) Decibel Explanation: The decibel (dB) is a logarithmic unit that indicates the ratio of a physical quantity (usually power or intensity) relative to a specified or implied reference level. A ratio in ... from their roosts in caves, attics, or trees at dusk and hunt for insects into the night.

Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Last Answer : (1) air Explanation: An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an ... particles from a flowing gas (such as air) using the force of an induced electrostatic charge.

Electrostatic precipitator is used to control — (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Description : Electrostatic precipitator is used to control — (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Last Answer : (1) Air pollution Explanation: An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing has (such as air) using the force ... , and can easily remove fine particulate matter such as dust and smoke from the air stream.

The unit of measurement of noise is – (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Description : The unit of measurement of noise is – (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Last Answer : (1) Decibel Explanation: The decibel (dB) is the unit used to measure the intensity of sound or noise level. It is given in terms of a logarithmic function of a ratio of power intensities. One ... one bel, named in honor of Alexander Graham Bell who was the inventor of the telephone and phonograph.

A decibel is – (1) A musical instrument (2) The wavelength of noise (3) A musical note (4) A measure of sound level

Description : A decibel is – (1) A musical instrument (2) The wavelength of noise (3) A musical note (4) A measure of sound level

Last Answer : (4) A measure of sound level Explanation: The decibel (dB) is a logarithmic unit that indicates the ratio of a physical quantity (usually power or intensity) relative to a specified or implied reference ... ratio in decibels is ten times the logarithm to base 10 of the ratio of two power quantities.

Unwanted signal that distorts a transmitted signal is called A. analogue B. noise C. digital D. tuning

Description : Unwanted signal that distorts a transmitted signal is called A. analogue B. noise C. digital D. tuning

Last Answer : noise

Data in compact disc is stored in form of A. analogue signal B. digital signal C. noise D. colors

Description : Data in compact disc is stored in form of A. analogue signal B. digital signal C. noise D. colors

Last Answer : digital signal

The unit of measurement of noise is (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Description : The unit of measurement of noise is (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Last Answer : Decibel

The unit of noise pollution (level) is : (1) decibel (2) decimal (3) ppm (4) None of these

Description : The unit of noise pollution (level) is : (1) decibel (2) decimal (3) ppm (4) None of these 

Last Answer : decibel

Permissible noise level at Residential area during night time is : (1) 45 dB (A) (2) 55 dB (A) (3) 75 dB (A) (4) 80 dB (A)

Description : Permissible noise level at Residential area during night time is : (1) 45 dB (A) (2) 55 dB (A) (3) 75 dB (A) (4) 80 dB (A)

Last Answer : 45 dB (A)

Negative feedback in amplifiers (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and increases noise (4) decreases bandwidth and increases noise

Description : Negative feedback in amplifiers (1) increases bandwidth and decreases noise (2) decreases bandwidth and decreases noise (3) increases bandwidth and increases noise (4) decreases bandwidth and increases noise

Last Answer :  increases bandwidth and decreases noise

Electrostatic precipitator is used to control – (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Description : Electrostatic precipitator is used to control – (1) Air pollution (2) Water pollution (3) Solid waste (4) Noise pollution

Last Answer : Air pollution

Noise is measured in (1) Watt (2) REM (3) Centigrade(4) Decibel

Description : Noise is measured in (1) Watt (2) REM (3) Centigrade(4) Decibel

Last Answer : Decibel

A decibel is (1) a musical instrument (2) the wavelength of noise (3) a musical note (4) a measure of sound level

Description : A decibel is (1) a musical instrument (2) the wavelength of noise (3) a musical note (4) a measure of sound level

Last Answer : a measure of sound level

Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Last Answer : air