Which metal is the most corroded ?

Which metal is the most corroded ?
by

1 Answer

Answer :

Copper is the most corrosive.
by

Related questions

Silver gets corroded due to ______ in air. (1) Oxygen (2) Hydrogen Sulphide (3) Carbon dioxide (4) Nitrogen

Description : Silver gets corroded due to ______ in air. (1) Oxygen (2) Hydrogen Sulphide (3) Carbon dioxide (4) Nitrogen

Last Answer : (2) Hydrogen Sulphide Explanation: Silver is a fairly stable metal and under normal circumstances does not corrode quickly. However, it is particularly susceptible to the effects of the sulfide ... atmosphere, especially in marine environment, and readily forms a surface tarnish of silver sulphide.

A three-phase, squirrel cage, induction motor will run hot due to _____________. A. open stator coils B. high power factor C. dirty or corroded slip rings D. reversed commutating poles

Description : A three-phase, squirrel cage, induction motor will run hot due to _____________. A. open stator coils B. high power factor C. dirty or corroded slip rings D. reversed commutating poles

Last Answer : Answer: A

The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. contactor coil '3M' has many shorted turns B. resistor 'R8-A2' has an open C. contacts '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Description : The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. ... '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Last Answer : Answer: B

The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults could be the cause? EL-0102 A. Master switch contact 'MS3' may have defective springs. B. Contactor '3M' coil could have an open winding. C. Contact '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Description : The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults ... '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.

Last Answer : Answer: A

Periodic testing by a shoreside support technician using a special camera which can detect potentially dangerous loose or corroded bus bar and controller connections is termed ______________. A. heat sensitive thermography B. visual pyrotronics C. corrosion electrolysis D. electric vibroanalysis

Description : Periodic testing by a shoreside support technician using a special camera which can detect potentially dangerous loose or corroded bus bar and controller connections is termed ______________. A. heat sensitive thermography B. visual pyrotronics C. corrosion electrolysis D. electric vibroanalysis

Last Answer : Answer: A

Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Description : Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Last Answer : Answer: C

Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine

Description : Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine

Last Answer : (B) Nitric acid (10%)

Wood is corroded by (A) Hydrochloric acid (B) SO2 (dry or wet) (C) Chlorine (dry or wet) (D) All (A), (B) and (C)

Description : Wood is corroded by (A) Hydrochloric acid (B) SO2 (dry or wet) (C) Chlorine (dry or wet) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Platinum and silver are corroded by (A) Caustic soda solution (B) Phosphoric acid (C) Sulphuric acid (10%) (D) None of these

Description : Platinum and silver are corroded by (A) Caustic soda solution (B) Phosphoric acid (C) Sulphuric acid (10%) (D) None of these

Last Answer : (D) None of these

Tin vessels are corroded by(A) Anhydrous ammonia(B) Aromatic solvents(C) Synthetic detergent solution(D) None of these

Description : Tin vessels are corroded by (A) Anhydrous ammonia (B) Aromatic solvents (C) Synthetic detergent solution (D) None of these

Last Answer : (D) None of these

Lead pipes are not safe for carrying drinking water because water containing dissolved oxygen attacks lead thereby forming poisonous Pb (OH)2 . Lead pipes are readily corroded by (A) Dilute HCI (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Description : Lead pipes are not safe for carrying drinking water because water containing dissolved oxygen attacks lead thereby forming poisonous Pb (OH)2 . Lead pipes are readily corroded by (A) Dilute HCI (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Last Answer : (B) Acetic acid

Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%

Description : Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%

Last Answer : (B) Synthetic detergent solution

Graphite is corroded by (A) Sulphuric acid (10%) (B) Sea water (C) Hydrochloric acid (D) None of these

Description : Graphite is corroded by (A) Sulphuric acid (10%) (B) Sea water (C) Hydrochloric acid (D) None of these

Last Answer : (D) None of these

Rubber lined vessels are corroded by the action of (A) Aqua regia (B) Chloroform (C) Sulphuric acid (95%) (D) All (A), (B) and (C)

Description : Rubber lined vessels are corroded by the action of (A) Aqua regia (B) Chloroform (C) Sulphuric acid (95%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Last Answer : (A) Sulphuric acid (10%) at room temperature

Teflon (PTFE) is corroded by (A) Hydrochloric acid (10%) (B) Hydrochloric acid (95%) (C) Sulphuric acid (D) None of these

Description : Teflon (PTFE) is corroded by (A) Hydrochloric acid (10%) (B) Hydrochloric acid (95%) (C) Sulphuric acid (D) None of these

Last Answer : (D) None of these

Lead pipes are not safe for carrying drinking water, because water, containing dissolved oxygen attacks lead thereby forming poisonous Pb(OH)2 . Lead pipes are readily corroded by (A) Dilute HCl (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Description : Lead pipes are not safe for carrying drinking water, because water, containing dissolved oxygen attacks lead thereby forming poisonous Pb(OH)2 . Lead pipes are readily corroded by (A) Dilute HCl (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Last Answer : (B) Acetic acid

Glass is corroded by (A) Fluorine (dry or wet) (B) Sulphuric acid (C) Phosphoric acid (D) None of these

Description : Glass is corroded by (A) Fluorine (dry or wet) (B) Sulphuric acid (C) Phosphoric acid (D) None of these

Last Answer : (A) Fluorine (dry or wet)

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Silver gets corroded due to ___ in air. (1) Oxygen (2) Hydrogen Sulphide (3) Carbon dioxide (4) Nitrogen

Description : Silver gets corroded due to ___ in air. (1) Oxygen (2) Hydrogen Sulphide (3) Carbon dioxide (4) Nitrogen

Last Answer : Hydrogen Sulphide