Description : Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%
Last Answer : (B) Synthetic detergent solution
Description : Glass is corroded by (A) Fluorine (dry or wet) (B) Sulphuric acid (C) Phosphoric acid (D) None of these
Last Answer : (A) Fluorine (dry or wet)
Description : Stainless steel is not corroded by (A) Hydrochloric acid (10%) (B) Nitric acid (10%) (C) Sulphuric acid (10%) (D) Saturated brine
Last Answer : (B) Nitric acid (10%)
Description : Graphite is corroded by (A) Sulphuric acid (10%) (B) Sea water (C) Hydrochloric acid (D) None of these
Last Answer : (D) None of these
Description : Teflon (PTFE) is corroded by (A) Hydrochloric acid (10%) (B) Hydrochloric acid (95%) (C) Sulphuric acid (D) None of these
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane
Last Answer : (B) Butyl alcohol
Description : Chlorine is prepared in the laboratory by treating manganese dioxide `(MnO_(2))` with aqueous hydrochloric acid according to the reaction, `4HCl_((aq)
Last Answer : Chlorine is prepared in the laboratory by treating manganese dioxide `(MnO_(2))` with aqueous hydrochloric acid according to ... g C. 8.4 g D. 3.65 g
Description : If 31.3 g of manganese(II) chloride 48.3 g of chlorine gas and 25.7 g of water react to produce manganese(IV) oxide and hydrochloric acid what is the limiting reactant and what mass of hydrochloric?
Last Answer : Need answer
Description : What is the reaction when solid manganese dioxide reacts with hydrochloric acid to produce manganese chloride liquid water and chlorine gas?
Last Answer : The chemical reaction is:MnO2 + 4 HCl = MnCl2 + Cl2 + 2 H2O
Description : What happened when chlorine and hydrochloric acid combine to each other?
Last Answer : when chlorine mix to Hydrochloric acid (HCI) it will produce ofproduct of Hydrogen gas and Zinc Chloride. During Chemical Reactionthe particles of two chemical subtances will collide to each otherand it will produce heat.
Description : What is the substance that reacts with hydrochloric acid to produce chlorine gas?
Last Answer : This compound is the manganese dioxide, MnO2.
Description : When zinc reacts with hydrochloric acid, the gas evolved is (a) Oxygen (b) Hydrogen (c) Chlorine (d) None of these
Last Answer : Ans:(b)
Description : A single covalent bond (a) Is formed by the transfer of two electrons (b) Exists between hydrogen and chlorine in an aqueous solution, of hydrochloric acid (c) Is longer than a double bond (d) Does not require energy to disrupt it unlike an ionic bond
Last Answer : Ans:(c)
Description : The sprayers are cleaned before use by— (A) 1% chlorine water (B) 1% hydrochloric acid (C) 1% ammonia water (D) 1% bromine water
Last Answer : (B) 1% hydrochloric acid
Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid
Last Answer : (A) Sulphuric acid
Description : The end bleaching agent used to move last traces of colour bodies from the pulp is (A) Chlorine dioxide (ClO2 ) (B) MgO (C) SO2 gas (D) Mercaptans
Last Answer : (A) Chlorine dioxide (ClO2 )
Description : Cast iron vessels are not suitable for the storage of (A) Freon (B) H2SO4 (95%) at room temperature (C) H2SO4 (fuming) (D) Wet SO2
Last Answer : (D) Wet SO2
Description : Platinum and silver are corroded by (A) Caustic soda solution (B) Phosphoric acid (C) Sulphuric acid (10%) (D) None of these
Description : Lead pipes are not safe for carrying drinking water because water containing dissolved oxygen attacks lead thereby forming poisonous Pb (OH)2 . Lead pipes are readily corroded by (A) Dilute HCI (B) Acetic acid (C) Concentrated H2SO4 (D) None of these
Last Answer : (B) Acetic acid
Description : Rubber lined vessels are corroded by the action of (A) Aqua regia (B) Chloroform (C) Sulphuric acid (95%) (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these
Last Answer : (A) Sulphuric acid (10%) at room temperature
Description : Lead pipes are not safe for carrying drinking water, because water, containing dissolved oxygen attacks lead thereby forming poisonous Pb(OH)2 . Lead pipes are readily corroded by (A) Dilute HCl (B) Acetic acid (C) Concentrated H2SO4 (D) None of these
Description : Name TWO sorbents which are used in conventional wet scrubbing processes to remove SO2 produced by combusting coal.
Last Answer : (1) LIME (2) LIMESTONE (3) SODIUM SULFITE OR NaCO3 OR NaOH
Description : Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)
Last Answer : (B) Dry chlorine & dry fluorine
Description : Wet chlorine gas produced during electrolysis of brine is dehydrated by (A) Spraying 66° Be H2SO4 counter current to the flow of the gas (B) Passing it through a bed of diatomaceous earth (C) Passing it through a bed of silica gel (D) None of these
Last Answer : (A) Spraying 66° Be H2SO4 counter current to the flow of the gas
Description : Tin vessels are corroded by (A) Anhydrous ammonia (B) Aromatic solvents (C) Synthetic detergent solution (D) None of these
Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature
Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment
Description : When conc. H2 SO4 is added to dry KNO3 , brown fumes are evolved. These fumes are due to (1) SO3 (2) SO2 (3) NO2 (4) N2O
Last Answer : NO2
Description : Which metal is the most corroded ?
Last Answer : Copper is the most corrosive.
Description : Silver gets corroded due to ______ in air. (1) Oxygen (2) Hydrogen Sulphide (3) Carbon dioxide (4) Nitrogen
Last Answer : (2) Hydrogen Sulphide Explanation: Silver is a fairly stable metal and under normal circumstances does not corrode quickly. However, it is particularly susceptible to the effects of the sulfide ... atmosphere, especially in marine environment, and readily forms a surface tarnish of silver sulphide.
Description : A three-phase, squirrel cage, induction motor will run hot due to _____________. A. open stator coils B. high power factor C. dirty or corroded slip rings D. reversed commutating poles
Last Answer : Answer: A
Description : The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. ... '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs
Last Answer : Answer: B
Description : The winch shown in the illustration operates in any of the positions with the master switch in the 'lower' direction, but will not 'hoist' in any of the master switch hoist positions. Which of the listed faults ... '2M' in the power circuit may be badly corroded. D. Series relay 'FR' may be open.
Description : Periodic testing by a shoreside support technician using a special camera which can detect potentially dangerous loose or corroded bus bar and controller connections is termed ______________. A. heat sensitive thermography B. visual pyrotronics C. corrosion electrolysis D. electric vibroanalysis
Description : Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease
Last Answer : Answer: C
Description : Silver gets corroded due to ___ in air. (1) Oxygen (2) Hydrogen Sulphide (3) Carbon dioxide (4) Nitrogen
Last Answer : Hydrogen Sulphide
Description : Which of the following plants does not emit appreciable amount of SO2 in atmosphere? (A) Thermal power plant (B) Petroleum refinery (C) Nitric acid plant (D) Sulphuric acid plant
Last Answer : (C) Nitric acid plant
Description : __________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel
Last Answer : (B) Sulphuric acid
Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these
Last Answer : (C) Alkylation of hydrocarbons
Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous
Last Answer : (C) Catalytic homogenous
Description : Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating ... but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling
Last Answer : (D) Decomposition of sulphuric acid on heating does not start before its boiling
Description : Cooking liquor in case of sulphite process is (A) Sodium sulphite and sodium bisulphite (B) Magnesium sulphite and free SO2 in acid medium (C) Magnesium sulphate and magnesium bicarbonate (D) None of these
Last Answer : (A) Sodium sulphite and sodium bisulphite
Description : Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these
Last Answer : (C) Steel or iron
Description : Dry chlorine can be handled in a vessel made of (A) Iron or steel (B) PVC (C) Nickel (D) Brass
Last Answer : (A) Iron or steel
Description : Is a physical change A.Forming a mixture B.Burning wood C.Food turning into waste in the intestines D.Turning solid sodium and chlorine gas into salt?
Last Answer : What is the answer ?
Description : Aluminium storage vessel can be used to store (A) Aqua regia (B) Ferrous sulphate (C) Hydrochloric acid (10%) (D) None of these
Description : Nickel made/clad equipments are suitable for handling (A) Ammonia (both aqueous & anhydrous) (B) Fruit juices, milk & its products and caustic soda solution (C) Nitric acid & hydrochloric acid (concentrated) (D) Sulphuric acid (concentrated)
Last Answer : (B) Fruit juices, milk & its products and caustic soda solution
Description : Hydrochloric acid is __________ corrosive to common metals. (A) Least (B) Not (C) Mildly (D) Highly
Last Answer : (D) Highly
Description : Hydrochloric acid is stored in a __________ steel vessel. (A) Lead lined (B) Rubber lined (C) Glass lined (D) Stainless
Last Answer : (B) Rubber lined