Answer the following briefly in not more than 30 words. What are basic industries ? Give an example. -SST 10th

1 Answer

Answer :

The industries which supply the raw materials to the manufacturers for the production of finished goods are known as Basic industries or key industries. e.g. iron and steel and copper smelting, aluminium smelting.

Related questions

Description : Answer the following briefly in not more than 30 words. What is manufacturing ? -SST 10th

Last Answer : Manufacturing implies to the production of finished more valuable products from raw materials. The finished goods are more expensive as compared to raw materials, thus manufacturing firms earn huge profits by processing raw stuff to finished goods on a large scale.

Description : Answer the following briefly in not more than 30 words. Name any three human factors for the location of an industry. -SST 10th

Last Answer : Three human factors for the location of an industry → (a) Cheap labour must be available. (b) There should be easy flow and good flow of capital. (c) Basic services like banking, insurance, transportation etc must be available.

Description : Answer the following briefly in not more than 30 words. Name any three physical factors for the location of the industry. -SST 10th

Last Answer : Three physical factors for the location of the industry are (a) Raw material is a preliminary for setting up any manufacturing firm, thus location should be such that the raw material is easily ... be marketed. The firm should be in a location where the manufactured products can be easily marketed.

Description : Answer the following briefly in not more than 30 words. Name the important raw materials used in the manufacturing of cement. -SST 10th

Last Answer : Cement is an essential raw material for the for construction of buildings, factories, bridges, roads, airports, dams and for other commercial establishments. The cement industries use bulky and heavy raw materials like limestone, silica, alumina and gypsum.

Description : What are called basic or key industries? Give examples. -SST 10th

Last Answer : Basic or key industries are those which supply their products or raw materials to manufacture other goods. Examples — iron and steel industry, aluminium smelting industry.

Description : Classify industries on the basis of the source of raw materials. Give example. -SST 10th

Last Answer : On the basis of source of raw materials used, industries are classified into- (i) Agro-based industries (ii) Mineral-based industries (i) Agro-based industries are based on agricultural raw ... metals as raw materials, for example iron and steel, cement, aluminium, machine tools, petrochemicals.

Description : Classify the industries on the basis of ownership and give one example of each category. -SST 10th

Last Answer : Classification of Industries on the basis of ownership:

Description : What*Write a Informal letter 200-300 words, on topic:Letter to your friend, reminding him to return the book you let him.Discuss: •briefly what the book was about•Your emotional attachment to the book•How your friend can return the book?

Last Answer : MyNameIsJeff

Description : Differentiate Basic and Secondary Industries. -SST 10th

Last Answer : Basic industries are the industries on which other industries depend while secondary industries are those industries which produce goods for consumption. Basic industries are also known as key industries while secondary industries are also called consumer industries.

Description : Answer the following questions in about 30 words: Distinguish between the following in not more than 30 words. -SST 10th

Last Answer : (i) (a) Ferrous and non-ferrous minerals Ferrous minerals Non-ferrous mineralsThese minerals contain iron. They provide a strong base for the development of metallurgical industries.These minerals do not ... are: Firewood, Coal and Petroleum Some Examples are: Solar, Wind, Tidal and Atomic Energy

Description : Write the answers of the following questions in 120 words. How do industries pollute the environment ? -SST 10th

Last Answer : The rapid growth in industries has led to considerable economic growth. However, apart from the benefits it has also contributed to the increase in pollution of land, water, air, noise resulting in ... in the water bodies which make the water unfit for the flora and fauna of the hydrosphere.

Description : Using Table 2, find one Psalm from the five books that would relate to the topical themes that are noted in the table. Then briefly explain how the Psalm example you chose, fits with the theme?

Last Answer : bruh

Description : Classify industries on the basis of the nature of products Give one example of each. -Geography

Last Answer : On the basis of the nature of products, industries can be divided into two categories : 1. Heavy Industry: Use heavy and bulky raw material as iron ore and coal etc. Example : Iron ... . 2. Light Industry: Use light raw material. Example: . Pharmaceutical industry, chemical industry etc.

Description : Briefly answer the following : 1. Mention one way in which man is responsible for soil erosion. -Geography

Last Answer : 1. Deforestation 2. Deepening of the river bed will prevent floods and ultimately shore and stream bank erosion. 3. The soils an indefinitely durable so they provide valuable building material.

Description : How do religion, politics, economics, and geography continue to cause tensions in the Middle East Briefly explain your answer.?

Last Answer : A major source of conflict in the Muslim Middle East is the divisive nature between the two main sects of Islam: Sunni and Shi'a. Although these two sects agree on the fundamentals of Islam and ... of the Quran, they are in conflict about who would lead the Muslim community after Muhammad's death.

Description : Can an image be obtained on the screen by a concave lens? Explain your answer briefly.

Last Answer : The ray diagram of concave lens for different positions of the object show that rays diverge out and do not meet on the other side of the lens after refraction. Therefore real image is not formed, but virtual image is formed on extending the rays backward.

Description : Core Industries are - (1) Basic industries (2) Consumer goods industries (3) Capital goods industries (4) Government industries

Last Answer : (1) Basic industries Explanation: Core Industries are those necessary industries in an economy that are necessary for industrialization of a country. Such industries include Machine tools, chemicals, ... such as that of foreign exchange requirements should govern the definition of the core sector.

Description : Which of the following is the classification of Industries on the basis of raw-materials? (1) Small Scale — Large scale (2) Primary and Secondary (3) Basic and Consumer (4) Agro-based and Mineral based

Last Answer : (4) Agro-based and Mineral based Explanation: Industries are classified on the bases of source of raw material. There are two types of industries agro based and mineral based industries ... based industries are iron and steel, cement, aluminum, machine tools, and petrochemicals producing industries

Description : Core Industries are (1) Basic industries (2) Consumer goods industries (3) Capital goods industries (4) Government industries

Last Answer : Basic industries

Description : Which of the following is the classification of Industries on the basis of raw-materials ? (1) Small Scale – Large scale (2) Primary and Secondary (3) Basic and Consumer (4) Agro-based and Mineral based

Last Answer : Agro-based and Mineral based

Description : Answer the following questions in about 30 words. Compare the advantages and disadvantages of multi-purpose river projects. -SST 10th

Last Answer : Advantages of multi-purpose river projects: Multi-purpose river projects, as the name suggests, makes water available for multiple uses. It provides water for irrigation and domestic use. This water is ... cover or a village. The reservoir water also causes pollution due to excessive use of water.

Description : Answer the following questions in about 30 words. What is the significance of the border roads ? -SST 10th

Last Answer : The significance of border roads: (a) Border roads have improve the accessibility in areas of difficult terrain mainly the Northern and North Eastern border areas of India (b) These roads serve in the economic development of these areas.

Description : Answer the following questions in about 30 words: What is a mineral ? -SST 10th

Last Answer : Mineral is a homogenous, naturally occurring substance with a distinguishable internal structure. Minerals are found in rocks and alike structures. Over 2000 minerals have been identified till yet. The hardest mineral is diamond and the softest is talc.

Description : Answer the following questions in about 30 words. Name three states having black soil and the crop which is mainly grown in it. -SST 10th

Last Answer : 1) Black soil is found in the Deccan trap region. This comprises of the sates of Maharashtra, Chhatisgarh, Madhya Pradesh, Gujrat, Andhra Pradesh and Tamil Nadu. 2) The soil has a high water ... for cotton cultivation. 3) Black soil is also called Regurs from the Telugu word Reguda meaning cotton.

Description : Answer any four of the following in 30-40 words each: (a) What were the blessings the albatross brought with it ? -SST 10th

Last Answer : (a) The blessings of the albatross were like a ray of light in utter darkness. The sailors were miserably trapped in the land of mist and snow. Their ship was in the midst of icebergs and therefore ... he waited for the snake to quench his thirst first as if he was standing in a queue behind it.

Description : Answer the following questions in about 30 words. What type of soil is found in the river deltas of the eastern coast ? -SST 10th

Last Answer : The soil found in the river deltas of the eastern coast is alluvial soil. The main characteristics of the soil are as follows: - 1. These soils have an adequate proportion of potash, ... Drier areas have more alkaline content in the soil. It can be made productive after proper treatment.

Description : Answer the following questions in about 30 words. What steps can be taken to control soil erosion in the hilly areas ? -SST 10th

Last Answer : In the hilly areas soil erosion can be controlled by 1. Ploughing across contour lines can slow down the water flow in the slopes. This is known as Contour ploughing. 2. Making use of terrace ... of grass to check erosion by wind and water. This divides the wind force and causes less damage.

Description : Answer the following questions in about 30 words. What are the biotic and abiotic resources ? -SST 10th

Last Answer : Biotic resources: - The resources which are provided from the biosphere are called biotic resources. Examples: - Fish, Flora and fauna. Abiotic resources: - All the things which are non-living are called abiotic resources. Examples: Rocks and metals.

Description : Answer the following questions in about 30 words. How have human activities affected the depletion of flora and fauna ? Explain. -SST 10th

Last Answer : Human activities have greatly affected the depletion of flora and fauna in such a way as: (a) Expansion of the commercial and scientific forestry and mining activities: Expansion of the ... environmental pollution, poisoning and forest fires have led to the decline in the country's biodiversity.

Description : Answer the following questions in about 30 words. Explain how water becomes a renewable resource. -SST 10th

Last Answer : Our water needs are completed from two water sources groundwater (underground aquifers) and surface water (lakes, rivers, streams). Water cycle is the process which replenishes the water in these sources ... clouds. This is the process by which water is renewed. This is called Hydrological cycle.

Description : Answer the following questions in about 30 words. What is water scarcity and what are its main causes ? -SST 10th

Last Answer : Water scarcity occurs when the availability of water is not enough to match the demand for it. This caused by over exploitation of water resources. Increase in population, deforestation, wastage of ... is also used for irrigation and industrial use. This also contributes a lot in water scarcity.

Description : Answer the following questions in 30 words: Name one important beverage crop and specify the geographical conditions required for its growth. -SST 10th

Last Answer : Tea is an important beverage crop. It is used almost all across the country. The geographical conditions for its growth are: - (a) There is good growth of tea plants in tropical and ... climate throughout the year. (d) The tender leaf growth is ensured by evenly distributed annual rainfall.

Description : Answer the following questions in 30 words: Name one staple crop of India and the regions where it is produced. -SST 10th

Last Answer : Rice is the staple food crop of majority people in India. It is cultivated in the plains of north and north-eastern India, coastal areas and the deltaic regions. The growth of rice has ... possible in areas with low rainfall such as Punjab, Haryana, Western Uttar Pradesh and parts of Rajasthan.

Description : Answer the following questions in 30 words: Enlist the various institutional reform programmes introduced by the government in the interest of farmers. -SST 10th

Last Answer : The various institutional reform programmes introduced by the government for the benefits of farmers are: - 1. Crop insurance against drought, floods, fire, etc. 2. Minimum support price to encourage ... more. 5. Abolition of zamindari system also helped farmers to get more money and more produce.

Description : Answer the following questions in 30 words: The land under cultivation has got reduced day by day. Can you imagine its consequences ? -SST 10th

Last Answer : Declining area of land under cultivation coupled with increasing population have many consequences. They are:- 1. Food shortage for the increasing population of the country. 2. There will ... on the export trade as the agricultural products comprise a major section of international trade business

Description : Answer the following questions in about 30 words: How are minerals formed in igneous and metamorphic rocks ? -SST 10th

Last Answer : Minerals could be found in cracks and crevices within igneous and metamorphic rocks. Minerals are initially in liquid/molten or gaseous form. They rise through the crack towards the earth's surface and they solidify as they move upwards.

Description : Answer the following questions in about 30 words. State any three merits of roadways. -SST 10th

Last Answer : Three merits of roadways are: (a) Constructing road ways is cheaper. (b) Roadways connects door to door thus minimal cost of loading and unloading. (c) Provides facility to reach other modes of transport like railway stations, ports etc.

Description : Answer the following questions in about 30 words. Where and why is rail transport the most convenient means of transportation ? -SST 10th

Last Answer : Rail transport constitutes the most convenient mode of transport in the Northern plains because of the vast level and high population density. These conditions promote railways.

Description : Answer the following questions in about 30 words. What is meant by trade ? -SST 10th

Last Answer : Trade refers to the exchange of goods among people, states and countries. International trade refers to Trade between two or more. Trade that occurs-in-a region within the same country is called local trade.

Description : With the help of an example each, explain how ‘agro-based’ industries are different from ‘mineral based’ industries. -SST 10th

Last Answer : Industries based on agricultural products are called agro-based industries. Industries based on minerals are called mineral-based industries. Example of agro-based industry is sugar from sugarcane, jute, and cotton. Example of mineral-based industry is steel from iron ore.

Description : Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Last Answer : Subscriber Loop System: Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of wires. Subscriber loop refers to this pair of wires. It is un ... 1. Diameter of wire 2. D.C. resistance per Km 3. Attenuation per Km 

Description : Godrej Industries is an example of a…. A. Single Industry Firm B. Related Diversified Firm C. Unrelated Diversified Firm D. Multi-functional Diversified Firm

Last Answer : Unrelated Diversified Firm

Description : Godrej Industries is an example of a…. A. Single Industry Firm B. Related Diversified Firm C. Unrelated Diversified Firm D. Multi-functional Diversified Firm

Last Answer : Unrelated Diversified Firm

Description : A strategic gap is an un-exploited competitive opportunity. The following is an example of a Strategic Gap. A. Opportunities in substitute industries B. Opportunities for complementary products and services C. Opportunities over time D. All of these options are valid

Last Answer : All of these options are valid

Description : With reference to sugar industries answer the following questions : -Geography

Last Answer : 1. Because the sucrose content of the sugarcane starts decreasing within 24 hours of harvesting. 2. Bagasse, Molasses 3. North India – Uttar Pradesh, South India – Maharashtra

Description : Match List I (Industries) with List II (Important Centers) and select the correct answer using the code given below : L i st I L i st I I (I n dust r i es) (I m por t an t Cent er s) A. Cotton textile I. Ludhiana B. Hosiery II. ... I, C-II, D-III (3) A-III, B-II, C-I, D-IV (4) A-III, B-I, C-II, D-IV

Last Answer : (4) A-III, B-I, C-II, D-IV

Description : Describe briefly any three economic effects of the Non-Cooperation Movement. -SST 10th

Last Answer : (i) Boycott of foreign goods : People decided to boycott foreign goods and wear Swadeshi clothes, and use Swadeshi goods. (ii) Impact on imports : As people began discarding imported clothes, ... As people decided to boycott foreign clothes, production of Indian textile mills and handloom went up.

Description : Explain briefly the outcome of democracy? -SST 10th

Last Answer : . The first step towards evaluating outcome of democracy is to recognise that democracy is just a form of government. It means democracy provides an opportunity and it is the citizens who can take ... that it is a legitimate government. It means all decisions are taken as per the constitution only.

Description : Briefly explain the rise of London as an industrial and modern city. -SST 10th

Last Answer : . Industrialisation changed the form of urbanisation in the modern period. . The early industrial cities of Britain such as Leeds and Manchester attracted large number of migrants to the textile mills ... fold from 1 million to 4 million; as the Industrial Revolution attracted more and more people.

Description : Briefly explain the incident of the Jallianwala Bagh massacre and its effects on Punjab. -SST 10th

Last Answer : . On 13th April 1919, the infamous Jallianwala Bagh incident took place. . On that day, a crowd of villagers who had come to Amritsar to attend a fair gathered in the enclosed ... . The government responded with brutal repression. Seeing violence spread, Mahatma Gandhi called off the movement.