Mention two advantages of mini cement plants. -Geography

Mention two advantages of mini cement plants. -Geography
by

1 Answer

Answer :

Two advantages of mini cement plants are :  • It provides employment to the rural mass. • It makes cement easily available in remote and inaccessible areas.
by

Related questions

Mention two advantages that a mini steel plant has over an integrated iron and steel plant. -Geography

Description : Mention two advantages that a mini steel plant has over an integrated iron and steel plant. -Geography

Last Answer : Advantages of Mini steel plants are: 1. They use the electric arc furnace and thus conserve coal. 2. They require small capital investment. 3. They cater to the local need of the market and the cost of transport is reduced.

Mention three advantages that a mini steel plant has over an integrated steel plant. -Geography

Description : Mention three advantages that a mini steel plant has over an integrated steel plant. -Geography

Last Answer : Advantages of Mini steel plants are : 1. They use the electric arc furnace and thus conserve coal. 2. They require smart capital investment. 3. They cater to the local need of the market and the cost of transport is reduced.

State two advantages that mini steel plants have over large integrated steel plants. -Geography

Description : State two advantages that mini steel plants have over large integrated steel plants. -Geography

Last Answer : Mini steel plants have the following advantages over large integrated steel plants : 1. These are easy to construct and operate. 2. Mini steel plants have shorter gestation period than large ... are located far away from the integrated steel plants to meet the local demands in that area.

State any three advantages of setting up Mini steel plants. -Geography

Description : State any three advantages of setting up Mini steel plants. -Geography

Last Answer : The three advantages are : 1. It is easy to construct such a plant as its gestation period is short. 2. It needs less capital investment. 3. It uses electric furnace for processing which is eco-friendly.

(i) Mention two characteristics of a mini steel plant. (ii) From where does the integrated steel plant at Jamshedpur get its iron ore and coal ? -Geography

Description : (i) Mention two characteristics of a mini steel plant. (ii) From where does the integrated steel plant at Jamshedpur get its iron ore and coal ? -Geography

Last Answer : (i) Two characteristics of a mini steel plant are : 1. They use cheaply available scrap iron. 2. They use electric furnaces therefore cause no pollution. (ii) Jamshedpur plant get its iron ore from Singhbhum and Mayurbhanj. It get its coal from Jharia and Raniganj.

Mention the locational factors which favour the growth of cement industry in India. Name any two -Geography

Description : Mention the locational factors which favour the growth of cement industry in India. Name any two -Geography

Last Answer : Manufacturing of cement requires heavy and weight loosing materials and is primarily a raw material-oriented industry. Limestone is the main raw material and on an average 1.5 tonnes of limestone is required to ... input, as it is used not only as fuel in kiln but also to burn the limestone.

(i) Why is cement industry known as a basic industry ? (ii) Mention two major centres of cement industry in India. -Geography

Description : (i) Why is cement industry known as a basic industry ? (ii) Mention two major centres of cement industry in India. -Geography

Last Answer : (i) Cement is indispensable for building and construction work. So, cement industry is considered to be an important core infrastructure core industry. The per capita consumption of cement is taken as one of the ... in India are : 1. Satna / Kymore / Katni/ Durg in - Chhattisgarh (Any two).

How are integrated steel plant different from mini steel plants? What problem does the industry face? -Geography

Description : How are integrated steel plant different from mini steel plants? What problem does the industry face? -Geography

Last Answer : Manganese is mainly used in the manufacturing of Steel. The Iron and steel industries are the basic industry as rest all other industries are dependent on them. Steel is used in the manufacturing of goods, ... it. 3. As steel products are needed in every other sector too, its demand has increased.

(i) State two advantages of water transport. (ii) Mention any two factors that hinder in land water transport in India. -Geography

Description : (i) State two advantages of water transport. (ii) Mention any two factors that hinder in land water transport in India. -Geography

Last Answer : (i) 1. Water transport is the cheapest means of transport and is most suitable for carrying heavy and bulky materials having low specific cost. 2. It is fuel-efficient and environmentally friendly ... of total transport of India as it is greatly underutilized as it is a time-consuming transport.

Mention two advantages and one disadvantage of waterways. -Geography

Description : Mention two advantages and one disadvantage of waterways. -Geography

Last Answer : Two advantages of waterways are : 1. It is the cheapest source of transport. 2. Most suitable transport to carry heavy and bulky goods. One disadvantage of waterways is : 1. Demand for waterways is declining because its movement is not as fast as airways or railways.

Mention two advantages that surface wells have over inundation canals. -Geography

Description : Mention two advantages that surface wells have over inundation canals. -Geography

Last Answer : Two advantages of surface wells over inundation canals are : 1. They can be constructed where ever required. 2. They supply water throughout the year.

Mention two advantages that surface wells have over inundation canals. -Geography

Description : Mention two advantages that surface wells have over inundation canals. -Geography

Last Answer : Two advantages of surface wells over inundation canals are : 1. They can be constructed where ever required. 2. They supply water throughout the year.

Mention two advantages of rainwater harvesting. -Geography

Description : Mention two advantages of rainwater harvesting. -Geography

Last Answer : Two advantages of rainwater harvesting: (i) It avoids flooding of roads. (ii) It raises the.ground water table.

Mention two advantages and one disadvantage of air transport. -Geography

Description : Mention two advantages and one disadvantage of air transport. -Geography

Last Answer : Advantages of Air Transport: 1. This is relatively free of physical barrier such as mountain. 2. It saves time as it is the fastest means of transport. Disadvantage of Air transport: 1. It has limited carrying capacity. 2. It is the most expensive form of transport.

Mention any three advantages of well irrigation in India. -Geography

Description : Mention any three advantages of well irrigation in India. -Geography

Last Answer : Three advantages of well irrigation are : (i) Well is the simplest and the cheapest source of irrigation as the farmer has to pay regularly for canal irrigation which is not the case with ... Nitrates, Chlorides, Sulphates are mixed in well water naturally which add to the fertility of the soil.

What is the ideal location for setting up a cement factory? In which state does cements industry have strategically located plants? -Geography

Description : What is the ideal location for setting up a cement factory? In which state does cements industry have strategically located plants? -Geography

Last Answer : Cement has various uses like for building houses, factories, bridges, roads, airports, dams and other commercial establishments. For the cement industry, bulky and heavy raw materials are required such as ... have been taken. In terms of export and production, the cement industry is doing well.

Mention any two advantages of Mini Steel Plants. -SST 10th

Description : Mention any two advantages of Mini Steel Plants. -SST 10th

Last Answer : The main advantages of Mini Steel Plants are: (i) Their location at convenient points help to meet steel requirements of far flung areas and thus help in promoting a balanced regional growth. (ii) They are specially useful in promoting production of alloy and Steel in electric furnaces.

Mention two reasons for the concentration of steel plants in the Chota-Nagpur Plateau region -Geography

Description : Mention two reasons for the concentration of steel plants in the Chota-Nagpur Plateau region -Geography

Last Answer : Two reasons for the concentration of steel plants in the Chota Nagpur plateau region are : – (i) Availability of iron ore and coal. (ii) Cheap labour available from Bihar and Jharkhand.

(i) How is it advantageous for a mini steel plant— (1) to use electric furnaces (2) not to be located close to the location of the raw material ? -Geography

Description : (i) How is it advantageous for a mini steel plant— (1) to use electric furnaces (2) not to be located close to the location of the raw material ? -Geography

Last Answer : (i) (1) Mini Steel Plants use electric furnaces as it becomes easy for these plants scatter all over the country, and coal is also conserved. (2) These steel plants are not located close to the ... Bhilai gets its Iron from Dalli-Rajhare Mines and Coal from Kargati of M.P., Bokaro and Jharia also.

Discuss the two ways in which cement industry is important for the growth of a country. -Geography

Description : Discuss the two ways in which cement industry is important for the growth of a country. -Geography

Last Answer : (i) Cement is indispensable for building and construction works and hence cement industry is considered to be an important infrastructure core industry. (ii) It can play a significant role in the overall economic growth as India has emerged as a major exporter of cement.

Name the mineral used in the manufacture of: (i) Cement (ii) Aluminium -Geography

Description : Name the mineral used in the manufacture of: (i) Cement (ii) Aluminium -Geography

Last Answer : Mineral used in the manufacturing of : (1) Cement—Limestone. (2) Aluminium—Bauxite (3) Synthetics—Petroleum

Name the important raw materials used in the manufacturing of cement? -Geography

Description : Name the important raw materials used in the manufacturing of cement? -Geography

Last Answer : Limestone, silica, alumina, and gypsum are important raw materials used in the manufacturing of cement.

Mention three advantages that a mini steel plant has over an integrated steel plant. -SST 10th

Description : Mention three advantages that a mini steel plant has over an integrated steel plant. -SST 10th

Last Answer : The advantages are: Mini Steel Plants use electric furnaces thus conserving coking coal. They require less capital investments. Since they are located in industrial towns so transport cost is reduced. It is ecofriendly does not require large capital investment.

Mention the grassland found in Australia. There are two types of grasslands in Australia. -Geography

Description : Mention the grassland found in Australia. There are two types of grasslands in Australia. -Geography

Last Answer : Tropical grasslands – Savanna Temperate grasslands- Downs

Mention any two uses of a globe. -Geography

Description : Mention any two uses of a globe. -Geography

Last Answer : 1. The globe is useful to know the shape of the Earth 2. It helps us to understand the position, shape and size of the continents, oceans and seas.

Mention any two uses of maps. -Geography

Description : Mention any two uses of maps. -Geography

Last Answer : 1. Maps help us to locate places like towns, cities, districts, states, countries and continents. 2. They show the physical features such as mountains, plateaus, plains, coastal areas, islands, etc.

Mention any two differences between the Bhabar and the Tarai regions. -Geography

Description : Mention any two differences between the Bhabar and the Tarai regions. -Geography

Last Answer : Bhabar Region 1. It lies along the foot of the Shiwaliks from Indus to Tista, about 8 to 16 kms wide. 2. It comprises of pebble-studded rocks with porous beds so it is not suited for ... about 20 to 30 kms wide. 2. It is composed of comparatively finer alluvium and is reclaimed for agriculture.

What is Agro-forestry ? Mention any two benefits of Agro-forestry. -Geography

Description : What is Agro-forestry ? Mention any two benefits of Agro-forestry. -Geography

Last Answer : Agro forestry involves the raising of trees and agricultural crops either on the same land or in close association in such a way that all land including the waste patches is put to good use. ... timber from their land. 2. The land gives maximum production and provides employment to rural masses.

Mention two reasons for the development of the Bengaluru-Tamil Nadu Industrial Region. -Geography

Description : Mention two reasons for the development of the Bengaluru-Tamil Nadu Industrial Region. -Geography

Last Answer : Bengaluru - Tamil Nadu Industrial Region has experienced the fastest industrial growth in the post-independence era as : 1. This region is dominated by the cotton textile industry but, over ... climate and proximity to vast local markets have favored the concentration of industries in this region.

(i) What is a Planning Region? (ii) Mention any two characteristics of a planning region. -Geography

Description : (i) What is a Planning Region? (ii) Mention any two characteristics of a planning region. -Geography

Last Answer : (i) A planning region is a self-created living organism, having a lifetime which not only supports the life in the region but also radiates unifying forces that enable the region to be a unified ... should be flexible. 3. There should be natural cohesion. 4. It should have economic harmony

Mention any two factors which have influenced the development of the Electronic City of Bengaluru. -Geography

Description : Mention any two factors which have influenced the development of the Electronic City of Bengaluru. -Geography

Last Answer : Factors that influenced the development of the Electronic city of Bengaluru are : 1. The incentives by the state and central government. 2. The strategic location of the city in the ... number of Indian, foreign and multinational companies have invested large sums of money to nourish industries.

What is urban forestry ? Mention any two of its objectives. -Geography

Description : What is urban forestry ? Mention any two of its objectives. -Geography

Last Answer : Urban forestry pertains to raising and management of trees on public and privately owned lands in and around urban centres. It includes green-belts, road side avenues, parks etc. Its main objectives are : 1. Reduction of environmental pollution. 2. Recreation and improving aesthetic values.

Mention two major challenges faced by the tourism industry in India today. -Geography

Description : Mention two major challenges faced by the tourism industry in India today. -Geography

Last Answer : Challenges faced by the tourism industry in India today are : 1. Unplanned, unrestricted growth of tourism in India deprives the tourists of the original charm and beauty and ... , airports, hotels and other services. Inadequacies of such infrastructural facilities adversely affect tourism.

Mention any two drawbacks of land use pattern in India. Suggest any one measure to improve it. -Geography

Description : Mention any two drawbacks of land use pattern in India. Suggest any one measure to improve it. -Geography

Last Answer : The two drawbacks of land use pattern in India are : 1. Division of agricultural land into small and fragmented holdings. It is a serious problem in densely populated and intensively cultivated ... maintenance of Eco balance, this land should be put under afforestation and not under crop farming.

Mention any two differences between the Western Ghats and the Eastern Ghats. -Geography

Description : Mention any two differences between the Western Ghats and the Eastern Ghats. -Geography

Last Answer : Western Ghats 1. It runs parallel to the western coast in a north-south direction from Tapi river to Kanya Kumari. 2. It's average elevation is 900 to 1100 metres above sea level. Eastern ... 's average elevation is less than that of the western ghats and is about 600 meters above sea level.

Mention any two factors which influence natural vegetation of a place. -Geography

Description : Mention any two factors which influence natural vegetation of a place. -Geography

Last Answer : Two factors which influence natural vegetation of a place are climate and soil. (a) Climate: It influences the vegetation to a great extent and we can have several varieties such as Tropical ... of coastal areas and the acacia in drier parts of Maharashtra are examples of modification by soil.

Mention any two reasons why sufficient land is not available for cultivation in India. -Geography

Description : Mention any two reasons why sufficient land is not available for cultivation in India. -Geography

Last Answer : Two reasons for land not available for cultivation in India are : 1. Barren and unculturable waste cover all barren and uncultivated lands in mountains, hills slopes, deserts and rocky areas. These ... 2. The other reason is land put to nonagricultural uses like irrigation, industry, mining, etc.

(i) What is a planning region ? (ii) Mention two characteristics of a planning region. -Geography

Description : (i) What is a planning region ? (ii) Mention two characteristics of a planning region. -Geography

Last Answer : (i) A planning region is a self-created living, having a lifetime which not only supports the life in the region but also radiates unifying forces that enable the region to be a unified ... Single-level Planning done at the national level. 2. Process is is divided into small territorial unit

Mention any two characteristic features of the Peninsular Plateau of India. -Geography

Description : Mention any two characteristic features of the Peninsular Plateau of India. -Geography

Last Answer : Peninsular Plateau is the oldest landmass of India. General elevation is 600-1000 metres and slopes down to 500 metres in the north. The general slope of this plateau is from west to east. It consists of Igneous and Metamorphic rocks.

Mention the two environmental concerns with regard to the use of conventional energy resources. -Geography

Description : Mention the two environmental concerns with regard to the use of conventional energy resources. -Geography

Last Answer : (a) Burning of coal leaves a large residue of ash which is a cause of environmental concern if disposal is not done properly. (b) The use of petroleum fuel causes pollution to the ... The use of nuclear minerals may cause harmful radiation to environment if safe waste disposal is not done.

(i) Define sustainable development. (ii) Mention any two reasons for low percentage of area sown more than once in India. -Geography

Description : (i) Define sustainable development. (ii) Mention any two reasons for low percentage of area sown more than once in India. -Geography

Last Answer : (i) Sustainable development is the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. (ii) Low percentage of area sown more ... once is due to infertile soils, lack of moisture and not much use of fertilizers and manures.

Mention two objectives of the Indian Forest Policy. -Geography

Description : Mention two objectives of the Indian Forest Policy. -Geography

Last Answer : The two objectives are : (a) To maintain environmental stability through preservation and restoring of ecological balance. (b) To check on soil erosion and denudation of catchment area of rivers, lakes and reservoirs.

Mention any two positive impacts of tourism in India. -Geography

Description : Mention any two positive impacts of tourism in India. -Geography

Last Answer : The two positive impacts of tourism in India are: (a) It creates employment opportunities. (b) It helps to earn foreign exchange.

(i) Mention the climatic conditions required for growing coconut in India. (ii) Name two areas of coconut production in Sri Lanka. -Geography

Description : (i) Mention the climatic conditions required for growing coconut in India. (ii) Name two areas of coconut production in Sri Lanka. -Geography

Last Answer : (i) Climatic conditions required for growing coconut: Temperature – 25° C to 30° C. Rainfall – 125 to 130 cm well distributed. Frost and draught are very harmful to coconut. (ii) Two areas of coconut production in Sri Lanka are : 1. Nigombo 2. Kurunegala

Mention any two problems caused due to the growth of large cities. -Geography

Description : Mention any two problems caused due to the growth of large cities. -Geography

Last Answer : The essential problems caused due to the growth of large cities are : Unemployment: When people migrate to the cities, they do not find appropriate jobs and add to the problems of ... are grown at the expense of surrounding agricultural land thus reducing the scope of agricultural activities.

Define the term sex ratio. Mention any two reasons for the low sex ratio in India. -Geography

Description : Define the term sex ratio. Mention any two reasons for the low sex ratio in India. -Geography

Last Answer : The sex ratio is defined as the number of females per thousand males in the population. Male child receives a preferential treatment while the female child is neglected. With small family norms, many young couples do not go in for a second child if the first child happens to be a male.

Mention any two products which are transported through a pipeline. State any one advantage of this method of transportation. -Geography

Description : Mention any two products which are transported through a pipeline. State any one advantage of this method of transportation. -Geography

Last Answer : Petroleum/milk /water /gas /petroleum products, etc. Advantage —can be constructed even across water or difficult terrains and needs very little maintenance.

(i) State the location and extent of Bhabar. Mention any two differences between Bhabar and Tarai. -Geography

Description : (i) State the location and extent of Bhabar. Mention any two differences between Bhabar and Tarai. -Geography

Last Answer : (i) Bhabar is a plain situated along the foot of the Shiwaliks from the Indus to the Tista. Bhabar Tarai It lies along the foot of the Shiwaliks from Indus to Tista, about 8 to 16 kms. ... agriculture. (ii) India shares the longest land boundary with Bangladesh. Length of the boundary is 4,096 kms.

(i) Mention two ways in which tube-vsells are better than ordinary wells as a form of irrigation. -Geography

Description : (i) Mention two ways in which tube-vsells are better than ordinary wells as a form of irrigation. -Geography

Last Answer : (i) Tube wells are better form of irrigation than the ordinary wells because : 1. It is capable of irrigating more area, about 2 hectares per day while ordinary wells irrigate 0.2 hectares ... (ii) The two alternative methods of irrigation are: 1. Sprinkler irrigation. 2. Trickle-drip irrigation.

(i) Name any two methods of fishing. (ii) Mention the leading state for fish production in the Western Coast of India. State two reasons for the -Geography

Description : (i) Name any two methods of fishing. (ii) Mention the leading state for fish production in the Western Coast of India. State two reasons for the -Geography

Last Answer : (i) The two methods of fishing are : 1. Drifting 2. Trawling (ii) Kerala is the leading state for fish production in the western coast of India. The fishing industry has developed in ... lagoons and some of the coast remains calm for a long time which is quite convenient for fishing operations.