Description : __ is a collection of standards for LR-WPANs. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4
Last Answer : D. IEEE 802.15.4
Description : ____ is a collection of wireless broadband standards (WiMax). A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4
Last Answer : C. IEEE 802.16
Description : .______ is a collection of WLAN communication standards. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4
Last Answer : B. IEEE 802.11
Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned
Last Answer : b. CSMA/CA
Description : IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s
Last Answer : C. 1 Mb/s to up to 6.75 Gb/s
Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4
Last Answer : c. IEEE 802.3
Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a
Last Answer : c. i-c, ii-a, iii-d, iv-b
Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a
Last Answer : C) i-c, ii-a, iii-d, iv-b
Description : 802.3 is the standard for 10BASE5 Ethernet that uses ___________ cable as shared medium. A. Twisted pair cable B. Coaxial cable C. Fiber optic cable D. None of the above
Last Answer : B. Coaxial cable
Description : Zigbee specification are based on ______. A. 802.3 B. 802.11 C. 802.16 D. 802.15.4
Last Answer : D. 802.15.4
Description : Which of the following specifies a set of media access control (MAC) and physical layer specifications for implementing WLANs? a) IEEE 802.16 b) IEEE 802.3 c) IEEE 802.11 d) IEEE 802.15
Last Answer : c) IEEE 802.11
Description : .Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz
Last Answer : c. Sub 1 GHz
Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network
Last Answer : CSMA/CD is not suitable for a high propagation delay
Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above
Last Answer : 1-persistent
Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit
Last Answer : a. 1 byte
Description : _____________ layer protocols determine how the data is physically sent over the network’s physical layer or medium. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : D. Link layer
Description : Which of the following is the 802.11 High Rate Standard? a) IEEE 802.15 b) IEEE 802.15.4 c) IEEE 802.11g d) IEEE 802.11b
Last Answer : d) IEEE 802.11b
Description : Which of the following standard committee specifies Bluetooth and other Personal Area Networks (PAN)? a) IEEE 802.11b b) IEEE 802.15 c) IEEE 802.11g d) IEEE 802.16
Last Answer : b) IEEE 802.15
Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2
Last Answer : IEEE 802.11
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX
Last Answer : a. 1000 BASE-T
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX
Last Answer : A) 1000 BASE-T
Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above
Last Answer : four
Description : Which of the following spread spectrum techniques were used in the original IEEE 802.11 standard? a) FHSS and DSSS b) THSS and FHSS c) THSS and DSSS d) Hybrid technique
Last Answer : a) FHSS and DSSS
Description : WSN stands for A. Wide Sensor Network B. Wireless Sensor Network C. Wired Sensor Network D. None of these
Last Answer : B. Wireless Sensor Network
Description : CoAP is specialized in ___________ A. Internet applications B. Device applications C. Wireless applications D. Wired applications
Last Answer : A. Internet applications
Description : Which of the following WLAN standard has been named Wi-Fi? a) IEEE 802.6 b) IEEE 802.15.4 c) DSSS IEEE 802.11b d) IEEE 802.11g
Last Answer : c) DSSS IEEE 802.11b
Description : Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these
Last Answer : c. Both a and b
Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP
Last Answer : d. HTTP
Description : Which one out of these is not a data link layer technology? A. Bluetooth B. UART C. Wi-Fi D. HTTP
Last Answer : D. HTTP
Description : The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : A. Application layer
Description : ____________ protocols provide end to end message transfer capability independent of the underlying network. A. Network layer B. Transport layer C. Application layer D. Link layer
Last Answer : B. Transport layer
Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : C. Network layer
Description : ______ layer is responsible for sending of IP datagrams from the source network to the destination network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : The correct answer is: C. Network layer The network layer is responsible for routing and forwarding IP datagrams from the source network to the destination network. It provides logical addressing ... at the network layer include IP (Internet Protocol) and ICMP (Internet Control Message Protocol).
Description : What is the Ethernet/LAN cable used in RPi? A.Cat5 B.at5e C. cat6 D . RJ45
Last Answer : D . RJ45
Description : The 10/100Mbit Ethernet support enables the board to connect to _________ A. LAN B. MAN C. WAN D. WLAN
Last Answer : A. LAN
Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above
Last Answer : none of the above
Description : IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2 C) 11 D) 22
Last Answer : 22
Description : The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22
Last Answer : 1
Description : The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : either (a)or (b)
Description : . In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above
Description : In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above
Last Answer : NAV
Description : In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above
Last Answer : polling
Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above
Last Answer : CSMA/CA
Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11
Last Answer : 11
Description : In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11
Last Answer : 10
Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11
Last Answer : 01
Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11
Last Answer : 00
Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PCF
Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : ESS-transition